BHP453RHEX - Drill MAKITA - Free user manual and instructions
Find the device manual for free BHP453RHEX MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Hammer Drill/Driver |
| Brand | Makita |
| Model | BHP453RHEX |
| Voltage | 10.8V (12V max) |
| Battery Type | Lithium-ion (Li-ion) |
| Chuck Type | Keyless, 1/2" (13 mm) |
| Max Torque | 24 Nm (soft joint), 36 Nm (hard joint) |
| No Load Speed (Variable) | 0–400 / 0–1,300 RPM |
| Impact Rate | 0–6,000 / 0–19,500 BPM |
| Drilling Capacity (Steel) | 10 mm |
| Drilling Capacity (Wood) | 21 mm |
| Drilling Capacity (Masonry) | 10 mm |
| Weight (with battery) | 1.3 kg |
| Dimensions (L x H) | 189 mm x 225 mm |
| Motor Type | Brushed |
| Electronics | Variable speed trigger with forward/reverse |
| LED Light | Yes, with afterglow |
| Belt Clip | Included |
| Charger | Sold separately (not included) |
| Recommended Battery | BL1013, BL1016, etc. |
| Maintenance | Clean vents, check carbon brushes periodically |
| Safety Features | Lock-off button, double insulation |
| Spare Parts Availability | Via authorized Makita service centers |
Frequently Asked Questions - BHP453RHEX MAKITA
What battery does the Makita BHP453RHEX use?
The BHP453RHEX uses a 10.8V (12V max) Li-ion slide-on battery, such as Makita BL1013 or BL1016.
Is the BHP453RHEX a hammer drill?
Yes, it has a hammer function for drilling into masonry, with two-speed mechanical gearbox and variable speed.
How do I change the chuck on this drill?
The chuck is keyless; rotate it by hand to tighten or loosen. For removal, use an Allen key to unscrew the retaining screw inside the chuck.
What is the maximum drilling capacity in steel?
The maximum drilling capacity in steel is 10 mm (3/8 inch).
How do I adjust the torque setting?
Rotate the torque adjustment ring near the chuck to one of the 22 torque positions plus drill and hammer drill settings.
Why is my drill not turning on?
Check that the battery is fully charged and properly inserted. Also ensure the lock-off button is not engaged. If still not working, inspect carbon brushes.
Can I use this drill for screwdriving?
Yes, the adjustable torque clutch allows precise screwdriving, preventing over-tightening.
How do I maintain the drill?
Keep ventilation slots clean, store in a dry place, and periodically check carbon brushes for wear (replace if under 3 mm).
What is the weight of the BHP453RHEX with battery?
The weight is approximately 1.3 kg (2.9 lbs) with a standard battery.
Are replacement parts available for this model?
Yes, spare parts such as brushes, chucks, and switches are available through Makita authorized service centers.
User questions about BHP453RHEX MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual BHP453RHEX - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BHP453RHEX by MAKITA.