FX BAR 5050 - DJ Equipment JMAZ Lighting - Free user manual and instructions
Find the device manual for free FX BAR 5050 JMAZ Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | JMAZ Lighting |
| Model | FX BAR 5050 |
| Product Type | LED Light Bar |
| Category | DJ Equipment |
| LED Type | SMD 5050 |
| Number of LEDs | 48 |
| Power Consumption | 30W |
| Input Voltage | 100-240V AC, 50/60Hz |
| Dimensions (L x W x H) | 1000 x 50 x 80 mm |
| Weight | 1.8 kg |
| Control Protocol | DMX512, 3-pin XLR |
| DMX Channels | 3 or 7 channels (selectable) |
| Operating Modes | Auto, Sound Active, Master/Slave, Static Color, DMX |
| Beam Angle | 120° |
| Housing Material | Aluminum |
| IP Rating | IP20 (indoor use only) |
| Safety Certifications | CE, RoHS |
| Mounting Options | Floor stand or truss clamp (bracket included) |
| Maintenance | Clean with soft dry cloth; avoid solvents |
| Repairability | LED modules replaceable; contact support for parts |
Frequently Asked Questions - FX BAR 5050 JMAZ Lighting
How do I set the DMX address on the FX BAR 5050?
Press the Menu button to enter the menu, use Up/Down to select 'Addr', then set the address using Up/Down. Press Enter to confirm.
Can I use the light bar in sound-active mode?
Yes, select Sound Active mode via the menu. The fixture will react to music via its built-in microphone.
How many DMX channels does this fixture use?
It can operate in 3-channel (RGB) or 7-channel (RGB, dimmer, strobe, macros) mode, selectable in the settings.
What is the power consumption of the FX BAR 5050?
The maximum power consumption is 30W. Always use a power outlet that matches the voltage (100-240V).
Can I connect multiple units together?
Yes, use Master/Slave mode. Set one unit as master and others as slaves via the menu, then connect them with DMX cables.
How do I clean the light bar?
Disconnect from power and wipe the housing with a soft dry cloth. Do not use chemicals or water.
What is the beam angle of the LEDs?
The beam angle is 120 degrees, providing wide coverage suitable for stage wash effects.
Is the FX BAR 5050 suitable for outdoor use?
No, it has an IP20 rating and is designed for indoor use only. Exposure to moisture may damage the fixture.
How do I reset the fixture to factory default?
In the menu, navigate to Default or Reset option and press Enter. Confirm to restore factory settings.
What replacement parts are available?
Replacement LED modules and power supply can be ordered from JMAZ Lighting support. Contact your dealer for details.
User questions about FX BAR 5050 JMAZ Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual FX BAR 5050 - JMAZ Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FX BAR 5050 by JMAZ Lighting.