Versa Flex Par TRI220 - Lighting JMAZ Lighting - Free user manual and instructions
Find the device manual for free Versa Flex Par TRI220 JMAZ Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Light |
| Model | Versa Flex Par TRI220 |
| Brand | JMAZ Lighting |
| Light Source | 3x 8W RGB LEDs |
| Beam Angle | 25 degrees |
| DMX Channels | 3/7/10 channel modes |
| Control Protocols | DMX512, Master/Slave, Sound Active, Auto |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W |
| Dimensions (L x W x H) | 280 x 200 x 150 mm |
| Weight | 2.5 kg |
| Housing Material | Aluminum alloy |
| Cooling System | Passive convection |
| Mounting Options | Floor stand, truss clamp, hanging bracket |
| IP Rating | IP20 (indoor use only) |
| Operating Temperature | 0°C to 40°C |
| Included Accessories | Power cable, DMX cable, user manual |
| Safety Features | Overheat protection, safety cable attachment point |
| Maintenance | Clean lens with soft cloth; no user-serviceable parts inside |
| Spare Parts Availability | LED modules, power supply, DMX connectors (contact support) |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - Versa Flex Par TRI220 JMAZ Lighting
How do I set up the Versa Flex Par TRI220 for the first time?
Unpack the fixture, connect the power cable to an AC outlet (100-240V), and connect a DMX controller if desired. Set the DMX address using the control panel. Refer to the manual for detailed setup.
What are the different operating modes available?
The fixture supports DMX512, Master/Slave, Sound Active, and Auto modes. Use the menu buttons to select the desired mode.
How many DMX channels does the fixture use?
It can be configured to use 3, 7, or 10 channels depending on the mode. The default is often 7 channels for full RGB control.
Can I use this light outdoors?
No, the Versa Flex Par TRI220 has an IP20 rating and is designed for indoor use only. Exposure to moisture may damage the fixture.
How do I clean the fixture?
Disconnect power and allow to cool. Wipe the lens and housing with a soft, dry cloth. Do not use solvents or abrasive cleaners.
What should I do if the light does not respond to DMX?
Check that the DMX cable is properly connected and not damaged. Verify the DMX address matches the controller. Ensure the fixture is in DMX mode and the controller is sending data.
Is the fixture fanless?
Yes, the Versa Flex Par TRI220 uses passive cooling (no fan), making it silent during operation.
Can I replace the LED module myself?
The LED module is not user-serviceable. Contact JMAZ Lighting support or an authorized service center for repairs.
What is the maximum ambient temperature for safe operation?
The operating temperature range is 0°C to 40°C (32°F to 104°F). Do not use in environments exceeding this range.
How do I update the firmware?
Firmware updates are not typically required for this model. If an update is needed, it must be performed by qualified personnel using a DMX programmer. Contact customer support.
User questions about Versa Flex Par TRI220 JMAZ Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Versa Flex Par TRI220 - JMAZ Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Versa Flex Par TRI220 by JMAZ Lighting.
USER MANUAL Versa Flex Par TRI220 JMAZ Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JMAZ Lighting
Model : Versa Flex Par TRI220
Category : Lighting