Ventura - Office chair Fantastic - Free user manual and instructions

USER MANUAL Ventura Fantastic

Line drawing of an office chair with adjustable armrest and frontrest (no text or symbols)

VENTI

Gaming Chair

Caution:

Do not stand on, or use this chair as a step ladder. Use this product for seating one person at a time. This product should be checked periodically to ensure all components are secure and all hardware is tight.

Recommended weight capacity: 120kg

Looks like you've found your Fantastic!

We're thrilled you've chosen Fantastic Furniture to hdlp create a home you'll love!

Simple black icon of a person sitting in a chair (no text or symbols)

Fantastic Furniture

Love it ?Share it!

Fantas tic buy!Share how it looks at home on Instagram for your chance to win a \$250 Fantastic Furniture Gift Card! @fantasticfurniture

Assembly checklist

Illustration of a person reading a box with a 'Fantastic Furniture' tag, no text or symbols present

Read through the instructions carefully before you begin.

Safety warning illustration showing a person with crossed-out tools and checkmarks indicating repair or repair actions.

Make sure you have all the required tools. Never use power tools unless instructed.

A. B. C.

Identify and lay out all of the components before you begin assembly.

Simple line drawing of a person kneeling beside a rectangular object with circular elements (no text or symbols)

Unless instructed, do not fully tighten screws until the item is fully assembled.

Useful information

! Never use power tools unless specifically instructed. They can damage your components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for product care instructions.
! If you are having any difficulties assembling your product, missing any hardware or components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.

Fantastic Furniture

What you need

to assemble the product

Part list

Backrest (P1) × 1;

Headrest Pillow (P2) × 1;

Left Angle Adjuster (P3) x 1;

Left Angle Adjuster Cover (P4) × 1;

Right Angle Adjuster (P5) × 1;

Right Angle Adjuster Cover (P6) x 1;

Lumbar Pillow (P7) × 1 ;

Left Arm (P8) × 1;

Right Arm (P9) × 1 ;

Seat (P10) × 1;

Seat Plate (P11) × 1;

Gas Lift Cover (P12) × 1;

Gas Lift (P13) × 1;

Star Base (P14) × 1;

Castors (P15) × 5;

Backrest (P1) Headrest Pillow (P2) Right Angle Adjuster (P5) Left Angle Adjuster (P3) Left Angle Adjuster Cover (P4) Right Angle Adjuster Cover (P6) Lumbar Pillow (P7) 1; (P4) x 1; x 1; or (P6) x 1; Right Arm (P9) Left Arm (P8) Seat (P10) Seat Plate (P11) Gas Lift Cover (P12) Gas Lift (P13) Star Base (P14) Castors (P15)

8 × Long

Bolts (H1)

12 × Short

Bolts (H2)

6 × Small

Bolts (H3)

Allen Key

(H4)

Step 1

Gas Lift Cover (P12) Gas Lift (P13) Star Base (P14) Castors (P15)

Insert 5 x Castors (P15) into the Star Base (P14) as shown. Push down firmly on each castor to ensure they are fixed in position. Insert the Gas Lift (P13) into the top of Star Base (P14). Place the Gas Lift Cover (P12) over the top of the Gas Lift (P13) as shown.

Step 2

You will need
4 x Short Bolts (H2)	Allen Key (H4)

(H2) (H2) (H2) (H4) (H2) Seat Plate (P11) Seat (P10) EFORENT

Note the front facing orientation of the Seat Plate (P11) and align the holes on the Seat Plate (P11) with the bottom of the Seat (P10) as shown. Secure the Seat Plate (P11) to the Seat (P10) with 4x Short Bolts (H2) by tightening with the Allen Key (H4).

Fantastic Furniture

Step 3

You will need
8 x Long Bolts(H1)	Allen Key (H4)

(H1) (H1) (H1) (H1) (H1) (H4) (H1) (H1) (H1) (H1) Left Arm (P8) Seat (P10) Right Arm (P9)

Attach the Left & Right Arms (P8&P9) to each side of the Seat (P10) as shown with 8 x Long Bolts (H1) by tightening with the Allen Key (H4). Ensure each arm is firmly secured.

Step 4

Seat Plate (P11) Gas Lift (P13)

Position the center hole of the Seat Plate (P11) over the top of Gas Lift (P13). Carefully lower the Seat (P10) onto the Gas Lift (P13). Press seat down firmly. Check the connection is secure before sitting in the chair.

Fantastic Furniture

Step 5

You will need
4 x Short Bolts(H2)	Allen Key (H4)

Backrest(P1) (H2) (H4) (H2) Right Angle Adjuster(P5) (H2) (H2) (H2) Seat(P10)

Attach Backrest (P1) to Seat (P10) by aligning the holes as shown and securing the Right Angle Adjuster (P5) with 4 x Short Bolts (H2) by tightening with the Allen Key (H4).

Step 6

You will need
4 x Short Bolts(H2)	Allen Key (H4)

Backrest(P1) Seat(P10) (H4) (H2) (H2) Left Angle Adjuster(P3) (H2) (H2)

Attach Backrest (P1) to Seat (P10) by aligning the holes as shown and securing the Left Angle Adjuster (P3) with 4 x Short Bolts (H2) by tightening with the Allen Key (H4).

Fantastic Furniture

Step 7

You will need 4 x Small Bolts (H3) Allen Key (H4) Backrest (P1) Right Angle Adjuster Cover (P6) (H3) (R) (H3) (H3) (H4) Right Angle Adjuster (P5) Seat (P10)

Attach Right Angle Adjuster Cover (P6) to Right Angle Adjuster (P5) by aligning the holes and securing with 4 x Small Bolts (H3) by tightening with the Allen Key (H4).

Step 8

You will need
2 x Small Bolts (H3)	Allen Key (H4)

Seat (P10) Backrest (P1) Left Angle Adjuster Cover (P4) (H3) (H4) (H3) Left Angle Adjuster (P3)

Attach Left Angle Adjuster Cover (P4) to Left Angle Adjuster (P3) by aligning the holes and securing with 2 x Small Bolts (H3) by tightening with the Allen Key (H4)

Fantastic Furniture

Step 9

Backrest (P1) Backrest (P1) Headrest Pillow (P2) Lumbar Pillow (P7) CLICK

Attach the Lumbar Pillow (P7) to the chair as shown by threading the longer end of the elastic bands on the Lumbar Pillow (P7) between the bottom of the Backrest (P1) and Seat (P10), through to the back of the chair. Then thread the shorter end of the elastic through the cut-outs at the top of the Backrest (P1) and secure by clipping each end together at the back of the chair. Attach the Headrest Pillow (P2) to the chair as shown by threading each end of the elastic band on the Headrest Pillow (P2) through the cut-outs at the top of the Backrest (P1) and secure by clipping each end together at the back of the chair.

Line drawing of an office chair with adjustable armrests and a backrest (no text or symbols)

Job Complete!

In the interest of our environment please dispose of all packaging thoughtfully.

Fantastic Furniture