KT-165 - Measurement Sonel - Free user manual and instructions
Find the device manual for free KT-165 Sonel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Dimensions | 180 x 85 x 50 mm |
| Weight | 320 g (with battery) |
| Power Supply | 9V battery, type 6F22 |
| Display | LCD, 6000 counts |
| DC Voltage Range | 600 mV to 1000 V |
| AC Voltage Range | 600 mV to 1000 V |
| DC Current Range | 600 µA to 10 A |
| AC Current Range | 600 µA to 10 A |
| Resistance Range | 600 Ω to 60 MΩ |
| Capacitance Range | 60 nF to 60 mF |
| Frequency Range | 10 Hz to 10 MHz |
| Temperature Measurement | -20°C to 1000°C (with thermocouple) |
| Safety Category | CAT III 1000V, CAT IV 600V |
| Maintenance | Clean with dry cloth; remove battery if not used for long periods |
| Accessories Included | Test leads, thermocouple, battery, manual |
Frequently Asked Questions - KT-165 Sonel
How do I measure AC voltage with the KT-165?
Turn the rotary switch to V~. Connect the black test lead to COM and red to VΩHz. Touch probes to the circuit and read the display.
What is the maximum current I can measure safely?
For current measurement, the maximum is 10 A for up to 30 seconds. For continuous measurement, use the 600 mA range.
How do I replace the battery?
Turn off the meter and remove the protective holster. Unfasten the screw on the back, lift the battery cover, and replace the 9V battery with a new one.
What do the symbols on the display mean?
Common symbols: AC/DC for alternating/direct current, Ω for ohms, V for volts, A for amperes, µ for micro, m for milli, k for kilo, M for mega. Refer to the manual for all symbols.
Can I measure capacitance with this meter?
Yes, turn the dial to the capacitance mode (often marked with + and )- symbols). Insert the capacitor into the dedicated socket or use test leads.
Is the meter autoranging?
Yes, the KT-165 features autoranging for voltage, resistance, and current, but you can also select ranges manually for specific measurements.
How do I test continuity?
Set the dial to the continuity test mode (often a diode symbol with sound waves). Touch the probes together; the meter will beep if the circuit is closed (<50Ω).
What safety precautions should I follow?
Always use the correct input jacks and range. Do not measure voltages >1000V DC or AC. Use personal protective equipment and follow local safety regulations for electrical work.
How do I clean the meter?
Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasives. Keep the input terminals clean and free of debris.
Where can I get spare parts or repair service?
Contact Sonel authorized service centers. For test leads and fuses, check the product website or local distributors.
User questions about KT-165 Sonel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual KT-165 - Sonel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KT-165 by Sonel.