DM801 - Effect pedal Klark Teknik - Free user manual and instructions

Product Type	Effect Pedal
Brand	Klark Teknik
Model	DM801
Dimensions (W x D x H)	122 x 73 x 48 mm
Weight	0.45 kg
Power Supply	9V DC (center negative), 100 mA
Battery Option	9V battery (6LR61)
Inputs	1 x 1/4" TS (instrument)
Outputs	1 x 1/4" TS (amp/mixer)
Bypass	True bypass
Effects	Distortion, Overdrive, Compression
Controls	Level, Tone, Gain, Bypass footswitch
Enclosure Material	Aluminum alloy
Compliance	CE, RoHS
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Accessories Included	User manual, 9V DC adapter
Cleaning	Wipe with dry cloth; avoid solvents
Safety Warnings	Do not expose to moisture or extreme heat
Spare Parts Availability	Contact Klark Teknik support

Frequently Asked Questions - DM801 Klark Teknik

How do I connect the DM801 to my guitar and amp?

Connect your guitar to the Input jack and the Output jack to your amplifier. For best results, use a shielded 1/4'' instrument cable.

What power supply does the DM801 require?

It requires a 9V DC power supply with center negative polarity and a minimum current of 100 mA. A battery can also be used.

How do I change the battery?

Remove the screws on the bottom plate, replace the 9V battery (6LR61) ensuring correct polarity, and reattach the plate.

Is the DM801 true bypass?

Yes, the DM801 features true bypass, preserving your guitar's tone when the effect is off.

What is the DM801's effect type?

It offers distortion, overdrive, and compression effects, adjustable via Level, Tone, and Gain controls.

Why is there no sound when the pedal is active?

Check that the pedal is powered, cables are connected properly, and the Level knob is turned up. If using a battery, ensure it's fresh.

Can I use the DM801 with a bass guitar?

Yes, the DM801 works with bass and other instruments, but may affect low-end response depending on settings.

How do I clean the DM801?

Use a dry or slightly damp cloth to wipe the surface. Do not use abrasive cleaners or solvents.

Where can I get spare parts or service?

Contact Klark Teknik customer support or an authorized service center for spare parts and repairs.

Is the DM801 compatible with pedalboards?

Yes, its compact size and standard power requirements make it suitable for most pedalboards. Use optional mounting hardware if available.

USER MANUAL DM801 Klark Teknik

Important Safety Instructions

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with 14 " TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

Caution

To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution

instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

1. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

2. Use only attachments/accessories specified by the manufacturer.

1. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

1. Unplug this app aratus during lightning storms or when unused for long periods of time.

2. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

1. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

2. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

1. Correct disposal of this product: This symbol indicates that this

product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you

can take your waste equipment for recycling, please contact your local city office, or your household

waste collection service. 18. Do not install in a confined space, such as a book case or similar unit.

1. Do not place naked flame sources, such as lighted candles, on the apparatus.

2. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.

3. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones and

Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.

BESCHRÄNKTE GARANTIE

The DM801 allows external control of DM8000 Digital Audio Processor over Ethernet, including 3 ^rd party Control systems.

Front and Rear Panels

1 HLARK 2018 POWER DM801

KLRN TECHNO ETHERNET RESET RS232 DM801 2 3 4

EN Front and Rear Panels

1 POWER indicator lights up to show the unit is operating and receiving power via Ethernet.
2 ETHERNET port allows DM801 to connect to an Ethernet network. To use with an Ethernet based third-party control system, be sure to address port 10000 for control of the DM8000.
POWER indicator lights up to show the unit is operating and receiving power via Ethernet.
To use with an Ethernet based third-party control system, be sure to address port 10000 for control of the DM8000.

3 RESET switch allows you to reboot the DM801 unit. To press the switch, insert a small pin or stylus into the hole and press.
Use the DM Designer application to discover and set DM801 IP properties. By default, DM801 is set to receive an IP address from a DHCP server.
3 RESET switch allows you to reboot the DM801 unit. To press the switch, insert a small pin or stylus into the hole and press.

4 RS232 ports allow DM801 to accept and transmit commands to the main DM8000 unit and third-party serial based control systems. Use Port 1 to connect to a third-party control system Use Port 2 to connect to the DM8000

Front and Rear Panels

Front and Rear Panels

System
Processor AM3352 ARM Cortex-A8
Memory
RAM DDR3 256 MB
Flash NAND 256 MB
Serial port speeds Port#1 1200 bps to 115200 bps, selectablePort#2 115200 bps, ONLY
Data bits 8-bit protocol supported
Network 10-base T / 100-base TX Ethernet RJ45
Operating temperature range +5°C to +40°C
Storage temperature range -20°C to +60°C
Interface Ports
Ethernet 1 x RJ45
Serial port 2 x RS-232; Port#1 for 3rd-party; Port#2 for DM8000
Indicators
Power LED Blue
Ethernet Link / activity Yellow / green LEDs
Power Supply, Current Consumption
Power supply PoE
Power consumption 3.84 W max.
Dimensions / Weight
Dimensions (H x W x D) 45 x 117 x 120 mm (1.8 x 4.6 x 4.7")
Weight	0.85 kg (1.87 lbs)

Other important information

Important information

Other important information

1. Registreer online.

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 5270 Procyon Street, Las Vegas NV 89118, United States

Phone Number: [phone]

DM801

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Quick Start Guide 33

Warning:

Operation of this equipment in a residential environment could cause radio interference.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.

Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S

Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark