UAX220v2 - Hi-Fi System Digigram - Free user manual and instructions
Find the device manual for free UAX220v2 Digigram in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hi-Fi System / USB Audio Interface |
| Brand | Digigram |
| Model | UAX220v2 |
| Dimensions (W x D x H) | 220 x 150 x 45 mm |
| Weight | 1.2 kg |
| Power Supply | 12V DC, 1.5A (external adapter) |
| Power Consumption | 18W max |
| Audio Inputs | 2x XLR/TRS combo, 2x RCA |
| Audio Outputs | 2x XLR balanced, 2x RCA, 1x Headphone 6.35mm |
| Sample Rate | Up to 192 kHz |
| Bit Depth | 24-bit |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Signal-to-Noise Ratio | 110 dB |
| Total Harmonic Distortion | <0.001% |
| Supported Formats | PCM, DSD (via DoP), ASIO, WDM |
| Connectivity | USB 2.0 Type B, ADAT/S/PDIF optical |
| Headphone Output Power | 150 mW into 32 ohms |
| Controls | Volume knob, Input selector, Direct monitor switch |
| Display | Multifunction LED indicator |
| Construction Material | Aluminum chassis, steel bottom |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Certifications | CE, FCC, RoHS |
| Accessories Included | USB cable, power adapter, quick start guide |
| Warranty | 2 years limited |
Frequently Asked Questions - UAX220v2 Digigram
How do I connect the UAX220v2 to my computer?
Use the provided USB cable to connect the UAX220v2 to a USB 2.0 port on your computer. Install the latest drivers from the Digigram website for full functionality.
What are the supported sample rates?
The device supports sample rates up to 192 kHz with 24-bit depth, including 44.1, 48, 88.2, 96, 176.4, and 192 kHz.
Can I use the UAX220v2 with an iPad?
Yes, the UAX220v2 is class-compliant and can be used with iPads via a USB camera adapter, though direct monitoring features may require the Digigram Control Panel app.
How do I update the firmware?
Download the latest firmware from the Digigram support page. Run the firmware updater while the device is connected and in update mode (hold the input selector button while powering on).
Why is there no sound from the headphones?
Check that the headphone volume is turned up and that the output routing is set correctly. Ensure the headphones are plugged into the headphone jack (6.35mm) and that the driver is properly configured.
How do I set up direct monitoring?
Press the Direct Monitor switch on the front panel to enable zero-latency monitoring. Use the control panel software to adjust the mix between input and playback.
What is the maximum input level?
The maximum input level for the XLR/TRS combo inputs is +18 dBu (balanced) and for RCA inputs is +10 dBV. Adjust the gain with the input selector knob.
Is the UAX220v2 compatible with Windows 10 and macOS?
Yes, the UAX220v2 works with Windows 10 (and later) and macOS 10.12 and above. Download dedicated drivers for Windows or use class-compliant mode on macOS.
How do I clean the device?
Use a soft, dry cloth to clean the exterior. Do not use abrasive cleaners or solvents. Keep the connectors free of dust and moisture.
What should I do if the device is not recognized?
Try a different USB cable and port. Reinstall the drivers and ensure the device is powered on. If the issue persists, contact Digigram support with your serial number.
User questions about UAX220v2 Digigram
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual UAX220v2 - Digigram and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UAX220v2 by Digigram.