Profilo PSU7A230 - Vacuum Cleaner

PSU7A230 - Vacuum Cleaner Profilo - Free user manual and instructions

Find the device manual for free PSU7A230 Profilo in PDF.

📄 18 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Profilo PSU7A230 - page 13
View the manual : English EN Türkçe TR
Pick your language and provide your email: we'll send you a specifically translated version.
BrandProfilo
ModelPSU7A230
Product TypeCanister Vacuum Cleaner
Intended UseDomestic use only
Suction ControlElectronic slide control (variable power)
Floor ToolAdjustable floor tool for carpets and hard floors; separate hard-floor brush
Included AccessoriesTelescopic tube, flexible hose, crevice nozzle, upholstery nozzle, multi-purpose nozzle, accessories holder
Dust Bag TypeOriginal Profilo dust bags (paper with sealing strip)
Motor Protection FilterRemovable, cleanable by tapping or rinsing; dry 24 h before reuse
Exhaust FilterReplaceable micro-hygiene filter (annually) or optional HEPA filter (part no. 574 020)
Power CordAutomatic rewind; length not specified (typical 8-10 m)
Safety FeaturesAutomatic shut-off when not in use, parking aid, storage aid on underside
Energy EfficiencyComplies with EU regulation 665/2013 (class not specified on label)
WarrantyConditions set by representative in country of sale; sales receipt required
DisposalWEEE directive; recyclable packaging and filters; dispose of appliance at recycling centre
Replacement Filter PackageVZ51PT1AFG (5 dust bags + 1 micro-hygiene filter)

Frequently Asked Questions - PSU7A230 Profilo

How do I adjust the suction power?
Use the electronic slide control on the vacuum cleaner. Slide it to the desired level: lowest for delicate fabrics, low for daily use, medium for durable floors, high for stubborn dirt.
How do I replace the dust bag?
Open the lid by moving the locking lever. Remove the full bag by pulling the sealing strip to seal it, then insert a new Profilo original dust bag. The lid will close only when a bag is inserted.
How do I clean the motor protection filter?
Open the dust bag compartment lid, pull out the motor protection filter, and tap it clean. If very dirty, rinse with water and let it dry for at least 24 hours before reinserting.
How often should I replace the exhaust filter?
Replace the exhaust filter once a year. If you have a micro-hygiene filter, replace it annually; for the HEPA filter (part no. 574 020), replace as needed.
What accessories are included with the PSU7A230?
The vacuum cleaner comes with a telescopic tube, flexible hose, crevice nozzle, upholstery nozzle, multi-purpose nozzle, hard-floor brush, and an accessories holder.
Can I use non-original dust bags?
It is not recommended. Non-original bags may reduce performance, damage the vacuum, and void the guarantee. Only use Profilo original dust bags for optimal results.
How does the power cord rewind?
After vacuuming, unplug the vacuum cleaner, then briefly pull the power cord and release it. The cord will rewind automatically.
Is this vacuum suitable for wet vacuuming?
No. The Profilo PSU7A230 is designed for dry vacuuming only. Never vacuum damp or liquid substances to avoid damage and injury.
How do I store the vacuum when not in use?
Use the parking aid on the back for short pauses by sliding the floor tool catch into the groove. For longer storage, use the storage aid on the underside by standing the vacuum upright and clipping the floor tool into the groove.
What is the part number for the HEPA filter?
The HEPA filter can be ordered from after-sales service using part number 574 020.

User questions about PSU7A230 Profilo

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual PSU7A230 - Profilo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSU7A230 by Profilo.

USER MANUAL PSU7A230 Profilo

001 02655

PROFILO

Kahanma kisavzu

Instructions for use

Profilo PSU7A230 - PROFILO - 1

natural_image Line drawing of a vacuum cleaner with handle and clasp (no text or symbols)

PSUTA...

Profilo PSU7A230 - PROFILO - 2

natural_image Simple line drawing of an open book with a curved arrow indicating rotation (no text or symbols)

Cihaz açıklaması

Bandrol ve Seri No. :

Please keep this instruction manual. When passing the vacuum cleaner on to a third party, please also pass on this instruction manual.

Intended use

This vacuum cleaner is intended for domestic use and not for commercial use. Only use this vacuum cleaner in accordance with the instructions in this instruction manual.

In order to prevent injuries and damage, the vacuum cleaner must not be used for:

■ Vacuum-cleaning persons or animals
■ Vacuuming up:

  • hazardous, sharp-edged, hot or glowing substances.
  • damp or liquid substances.
  • highly flammable or explosive substances and gases.
  • ash, soot from tiled stoves and central heating systems.
  • toner dust from printers and copiers.

Spare parts, accessories, dust bags

Our original spare parts, original (special) accessories and original dust bags are designed to work with the features and requirements of our vacuum cleaners. We therefore recommend that you only use our original spare parts, original (special) accessories and original dust bags. This will ensure that your vacuum cleaner has a long service life and that the quality of its cleaning performance will remain consistently high throughout.

Please note:

- Using unsuitable or inferior-quality spare parts, (special) accessories and dust bags can damage your vacuum cleaner. Damage caused by the use of such products is not covered by our guarantee.

Safety information

This vacuum cleaner complies with the recognised rules of technology and the relevant safety regulations.

■ The appliance may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge if they are supervised or have been instructed on the safe use of the appliance and the have understood the potential dangers of using the appliance.
■ Children must never play with the appliance.

■ Cleaning and user maintenance must never be carried out by children without supervision.
■ Plastic bags and films must be kept out of the reach of children before disposal.

= Risk of suffocation.

Proper use

■ Only connect and use the vacuum cleaner in accordance with the specifications on the rating plate.
■ Never vacuum without the dust bag or dust container, motor protection or exhaust filter.

= This may damage the vacuum cleaner.

■ Always keep the vacuum cleaner away from your head when using nozzles and tubes.

= This could cause injury!

■ When vacuuming stairs, the appliance must always be positioned below the user.
■ Do not use the power cord or the hose to carry or transport the vacuum cleaner.
■ For safety reasons, if this appliance's mains power cable becomes damaged, it must be replaced by the manufacturer, their after-sales service department or a similarly qualified person.
■ If using the appliance for longer than 30 minutes, pull out the power cord completely.
■ When disconnecting the appliance from the mains, pull on the plug itself to remove it; do not pull on the power cord.
■ Do not pull the power cord over sharp edges or allow it to become trapped.
■ When the cable is being automatically rewound, ensure that the mains plug is not thrown towards persons, body parts, animals or objects.

= Use the mains plug to guide the power cord.

■ Pull out the mains plug before carrying out any work on the vacuum cleaner.
■ Do not operate the vacuum cleaner if it is damaged. Unplug the appliance from the mains if a fault is detected.
■ For safety reasons, only authorised after-sales service personnel are permitted to carry out repairs and fit replacement parts to the vacuum cleaner.
■ Protect the vacuum cleaner from the weather, moisture and sources of heat.
■ Do not pour flammable substances or substances containing alcohol onto the filters (dust bag, motor protection filter, exhaust filter, etc.).
■ The vacuum cleaner is not suitable for use on construction sites.

= Vacuuming up building rubble could damage the appliance.

■ When not in use, switch off the appliance and pull out the mains plug.
At the end of its life, the appliance should immediately be rendered unusable, then disposed of in an appropriate manner.

Please note

- The mains socket must be protected by at least a 16 amp circuit breaker.

If a circuit breaker is tripped when you switch on the vacuum cleaner, this may be because other electrical appliances which have a high current draw are connected to the same power circuit.

To prevent the circuit breaker from tripping, select the lowest power setting before switching the appliance on, and increase the power only once it is running.

Disposal information

Packaging

The packaging is designed to protect the vacuum cleaner from being damaged during transportation. It is made of environmentally friendly materials and can therefore be recycled. Dispose of packaging that is no longer required at an appropriate recycling point.

■ Old appliance

Old appliances still contain many valuable materials. Therefore, please take appliances that have reached the end of their service life to your retailer or recycling centre so that they can be recycled. For current disposal methods, please enquire at a retailer or your local council.

■ Disposal of filters and dust bags

Filters and dust bags are manufactured from environmentally friendly materials. Provided they do not contain substances that are not permitted in household waste, you can dispose of them with your normal household waste.

Notes on the energy label

This vacuum cleaner is a general purpose vacuum cleaner.

To achieve the declared energy efficiency and cleaning performance class on carpet and hard floor, please use the interchangeable universal nozzle.

These calculations are based on the delegated regulation (EU) no. 665/2013 established by the commission on 3rd May 2013 as a supplement to Directive 2010/30/EU.

All of the procedures in these instructions that are not described in more precise detail were listed based on DIN EN 60312-1:2014.

en

Congratulations on your purchase of a Profilo PSU7 vacuum cleaner.

This instruction manual describes various PSU7 models, which means that some of the equipment features and functions described may not be available on your model.

You should only use original Profilo accessories, which have been specially developed for your vacuum cleaner to achieve the best possible vacuuming results.

Fold out the picture pages.
Profilo PSU7A230 - en - 1

natural_image Simple line drawing of an open book with a curved arrow indicating rotation (no text or symbols)

Your vacuum cleaner

1 Adjustable floor tool
2 Hard-floor brush
3 Telescopic tube with adjusting sleeve and locking collar
4 Handle
5 Flexible hose
6 Accessories holder for multi-purpose nozzle*
7 Multi-purpose nozzle*
8 Cover
9 Exhaust filter*
10 Electronic slide control
11 Dust bag change indicator
12 ON/OFF button
13 Parking aid
14 Power cord
15 Storage aid (on underside of unit)
16 Motor protection filter*
17 Dust bag

Replacement parts and special accessories

A Replacement filter package VZ51PT1AFG

("For high suction power"/ "for top performance and excellent cleaning quality")

Content:

  • 5 dust bags with fasteners
  • 1 micro-hygiene filter

We therefore recommend that you only use our original dust bags.

Your appliance is a highly efficient vacuum cleaner that achieves excellent cleaning results when used with high-quality dust bags. Only by using high-quality dust bags (such as Profilo original dust bags) can you ensure that your vacuum cleaner is working at the energy efficiency class, dust pick-up rate and dust retention capacity listed on its EU energy label.

The use of inferior-quality dust bags (e.g. paper bags) can have a negative effect on the service life and performance of your appliance. Using unsuitable or inferior-quality dust bags can also damage your vacuum cleaner. Such damage is not covered by our guarantee.

You can find more information about this at www.profilo.com/tr. You can order our original vacuum cleaner bags here.

Before using for the first time

Figure 1\*

■ Push the handle onto the flexible hose until it engages.

Setting up

Figure 2

a) Push the flexible hose adapter into the opening on the vacuum cleaner until it engages.
b To remove the flexible hose, press the release button and pull the hose out.

Figure 3

■ Connect the handle and the telescopic tube together.

Figure 4\*

■ Connect the floor tool and the telescopic tube together.

Figure 5

■ To adjust the length of the telescopic tube, adjust the sliding switch in the direction of the arrow and adjust the tube to the required length.

Figure 6\*

■ Attach the accessories holder to the multi-purpose nozzle and clip it onto the suction pipe/telescopic tube.

Figure 7

■ Take the mains plug, pull the mains cable to the required length and insert the plug into a socket.

Figure 8

- Press the ON/OFF button in the direction of the arrow to switch your vacuum cleaner on.

Vacuuming

Figure 9

The required suction power can be selected infinitely variably by adjusting the slide control.

■Lowest

suction range:

Profilo PSU7A230 - ■Lowest - 1

For vacuuming delicate fabrics, e.g. curtains.

■Low

suction range:

Profilo PSU7A230 - ■Low - 1

For daily vacuuming of lightly soiled floors.

■Medium

suction range:

Profilo PSU7A230 - ■Medium - 1

For vacuuming durable floor coverings, hard floors and for heavily soiled surfaces.

■High

suction range:

Profilo PSU7A230 - ■High - 1

For vacuuming stubborn dirt and very heavily soiled surfaces.

Figure 10

Adjusting the floor tool:

a) For vacuuming rugs and carpets =>

b For vacuuming hard floors =>

Profilo PSU7A230 - Figure 10 - 1

Profilo PSU7A230 - Figure 10 - 2

Caution!

Floor tools are subject to a certain amount of wear, depending on the type of hard floors you have (e.g. rough, rustic tiles). Therefore, you must check the underside of the floor tool at regular intervals. Worn undersides of floor tools may have sharp edges that can damage sensitive hard floors, such as parquet or linoleum. The manufacturer does not accept any responsibility for damage caused by worn floor tools.

Figure 11\* cuuming with accessories

Attach the nozzles to the tube or handle as required:

a) Crevice nozzle for vacuuming crevices and corners, etc.

b) Upholstery nozzle for vacuuming upholstered furniture, curtains, etc.

Figure 12\*

Hard-floor brush

■For cleaning hard floor coverings (tiles, parquet flooring, etc.)

■Connect the floor tool and the telescopic tube together.

Figure 13

- Once you have switched off the vacuum cleaner, you can use the parking aid on the back of the vacuum cleaner if you wish to stop vacuuming for a short time. To do this, slide the catch on the floor tool into the groove on the back of the vacuum cleaner.

When the work is done

Figure 14

■Unplug the vacuum cleaner.

■Briefly pull the power cord and release. The cord rewinds automatically.

Figure 15

- To store or transport the vacuum cleaner, use the storage aid on the underside of the vacuum cleaner. Stand the vacuum cleaner up on its end. Slide the catch on the floor tool into the groove on the underside of the vacuum cleaner.

Changing the dust bag and filters

Replacing the dust bag

Figure 16

If the dust bag change indicator lights up brightly and evenly when the floor tool is lifted from the carpet and the highest suction power is selected, the dust bag must be changed, even though it may not yet be full. In this case it is essential to change the dust bag due to the type of material it contains. First check that the nozzle, suction pipe and flexible hose are not blocked, as this would also lead to the dust bag change indicator being triggered.

Figure 17

- Open the lid by moving the locking lever in the direction of the arrow.

Figure

18

a) Seal the dust bag by pulling the sealing strip and then remove it.
b) Insert a new dust bag into the holder and close the dust bag compartment lid.

Caution: the lid will only close when the dust bag is inserted.

Cleaning the motor protection filter

The motor protection filter should be cleaned regularly by knocking out the dirt and rinsing.

Figure

19\*

■ Open the dust bag compartment lid (see Figure 17).
■ Pull out the motor protection filter in the direction of the arrow.
■ Clean the motor protection filter by tapping it.
■ If it is very dirty, the motor protection filter should be rinsed.
The filter must then be left to dry for at least 24 hours.
■ After cleaning, slide the motor protection filter into the vacuum cleaner and close the dust bag compartment lid.

Replacing the exhaust filter

You must replace the exhaust filter in your vacuum cleaner once a year.

Replacing the micro-hygiene filter

Figure

20\*

■ Open the dust bag compartment lid (see Figure 17)
■ Release the filter holder by pressing the locking tab in the direction of the arrow
■ Remove the foam filter and micro-hygiene filter. Insert the new micro-hygiene filter and foam filter into the filter holder.
■ Insert the filter holder into the vacuum cleaner and clip into place.

Replacing the HEPA filter

You can order a new filter from our after-sales service using the following replacement part number: 574 020

Figure

21\*

■Open the dust bag compartment lid (see Figure 17)
■Release the HEPA filter by pressing the locking tab in the direction of the arrow and remove it from the vacuum cleaner (see Figure 20)
■Insert the new HEPA filter and clip into place.

If you have used the vacuum cleaner for fine dust particles (such as plaster or cement), clean the motor protection filter by tapping it and, if necessary, replace the motor protection filter and the exhaust filter.

Care

Always switch off the vacuum cleaner and disconnect the power cord from the mains before cleaning the vacuum cleaner. The vacuum cleaner and plastic accessories can be cleaned with a commercial plastic cleaner.

Do not use a scourer, glass-cleaning agent or all-purpose cleaning product.
Never immerse the vacuum cleaner in water.

The dust compartment can, if necessary, be cleaned with a second vacuum cleaner or simply wiped with a dry cloth or dusting brush.

Subject to technical modifications.

Profilo PSU7A230 - Care - 1

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

GB Conditions of guarantee

For this appliance the guarantee conditions as set out by our representatives in the country of sale apply. Details regarding same may be obtained from the dealer from whom the appliance was purchased. For claims under guarantee the sales receipt must be produced.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Profilo

Model : PSU7A230

Category : Vacuum Cleaner