VT-3590 BK - Radio Vitek - Free user manual and instructions

Product Type	Radio
Brand	Vitek
Model	VT-3590 BK
Color	Black
Dimensions (approx.)	200 x 120 x 80 mm
Weight (approx.)	0.5 kg
Power Supply	AC 230V ~ 50Hz or 2 x 1.5V R14/UM-1 batteries (not included)
Radio Bands	FM / AM
Tuning Type	Digital
Display	LCD with backlight
Alarm Function	Yes, with sleep timer and snooze
Preset Stations	Up to 10 FM and 10 AM
Speaker Output Power	1 W RMS
Headphone Jack	3.5 mm stereo
Care and Cleaning	Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Safety Precautions	Keep away from water and moisture. Do not disassemble. Use only supplied power adapter.
Spare Parts and Repairability	No user-serviceable parts inside. Contact authorized service center for repairs.
General Information	Compact portable radio with alarm and digital tuning. Suitable for home or travel.

Frequently Asked Questions - VT-3590 BK Vitek

How do I set the alarm on my Vitek VT-3590 BK?

Press and hold the ALARM button for 3 seconds. Use the TUNING knob to set the hour, press ALARM again to set minutes, then press ALARM to confirm. To activate, slide the ALARM switch to ON.

How do I scan for radio stations?

Press the SCAN button to automatically search for available FM/AM stations. The radio will stop at each strong station. To store a station, press and hold a preset number (1-10).

Can I use batteries in this radio?

Yes, the radio can run on 2 x 1.5V R14/UM-1 batteries (not included) for portable use. When using batteries, the AC power cord must be disconnected.

How do I set the time?

Press and hold the CLOCK button until the hour flashes. Use the TUNING knob to adjust, press CLOCK again to set minutes, then press CLOCK to save.

Why is there no sound from my radio?

Check if the volume is turned up. Ensure the radio is powered on (AC or batteries). If using headphones, remove them. If still no sound, try a different FM frequency or reset the radio.

How do I reset the radio to factory settings?

With the radio on, press and hold the RESET button (located on the bottom) for 5 seconds using a paperclip. All settings including presets and alarm will be cleared.

Can I connect external speakers?

The radio has a 3.5 mm headphone jack for headphones, but no line-out for external speakers. Use headphones for private listening.

What should I do if the display is dim?

The display brightness may be adjusted. Press and hold the DIMMER button for 2 seconds to cycle through brightness levels. Also check if the batteries are low when running on battery power.

How do I clean my radio?

Unplug the radio and remove batteries. Wipe the exterior with a soft, dry cloth only. Avoid getting moisture into the speaker grille or any openings. Do not use chemical cleaners.

Is the radio suitable for outdoor use?

The radio is designed for indoor use and should be kept away from rain or splashing water. However, it can be used outdoors in dry conditions with battery power.

USER MANUAL VT-3590 BK Vitek

Read all the instructions carefully before connection, usage and adjustment of the unit. Follow all warnings and operating recommendations in this manual.

Keep this manual for future ref- erence.

PRECAUTIONS

• Check, whether the electricity supply in your home sockets corresponds to the voltage specified on the housing of the unit.
• To prevent fire or shock hazard do not expose the appliance to rain or moisture.
• Never immerse the unit into water. To prevent fire or shock hazard do not use this unit near water for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool and such like places. Prevent the unit from dripping and splashing.

• Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.

• Place the unit in a way that you could easily pull out the plug from the socket if there are some damages.

• For additional protection during lighting and in cases when you are not going to use the unit for a long time, unplug the unit. It will prevent the unit from failure during lighting and power surges.
• To unplug the unit, hold it by the plug. Do not pull by the cord.
• To avoid risk of electric shock do not open the body of the unit yourself. Do not repair and do not modify the unit. Technical maintenance must be performed only by qualified service personnel.
  • Install the unit in places with proper ventilation.
• The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other objects that produce heat. Do not expose the unit to direct sunlight, extreme temperatures, excessive dust or mechanical shocks.

ENGLISH

DESCRIPTION

1 - carrying strap
2 - antenna
3 - BAND SELECT switch
4 - TUNING control
5 - TONE control
6 – radio tuning scale
7 - VOL control
8 - EAR jack
9 – battery compartment
10 -AC power socket

OPERATION INSTRUCTIONS

Installing batteries

• Open the battery compartment lid and insert two1,5 V (UM1) batteries, following the polarity.
• Close the battery compartment lid.

Note:

Do not use new and old or batteries of different types together.

If the operation of the unit is unstable, check the batteries and replace them if necessary.

Remove the battery, if you are not going to use the unit for a long time.

1. Before connection of the

unit, check, whether the electricity supply in your home sockets corresponds to the voltage specified on the housing of the unit.

1. Insert the plug into the socket; the battery supply will be cut.
2. Switch on the unit, by rotating the VOL control downwards till the click.
3. Use the band switch to select the desired band.
4. Use the TUNING control to tune to the desired station.
5. Use the VOL control to set the required volume level.

Note:

You can use the tone control: while listening to the news, set the control to the LOW position, while listening to music – to the HI position.

For better reception of FM or SW stations, fully extend the antenna and direct it at the required angle. For reception of MW stations the unit is equipped with a built-in antenna, for better reception of MW stations, try different variants of the unit location.

ENGLISH

1. After you stop listening to the radio, tune the VOL control upwards till the click.

Earphone connection

Connect the earphones to the EAR jack.

Specifications

1. Frequency range:
   MW: 526.5-1606.5 kHz
   FM: 76-108 MHz
   SW1: 7.10-7.30 MHz
   SW2: 9.50-9.90 MHz
   SW3: 11.65-12.05 MHz
   SW4: 13.60-13.80 MHz
   SW5: 15.10-15.60 MHz
   SW6: 17.50-17.90 MHz

2. Sensitivity:

FM: 24 dB

MW: 74 dB

SW: 42 dB

1. S/N ratio: AM 42 dB
2. Speaker: ∅ 92 mm/8 Ohm/1 W
3. Power supply: AC: 220 V, 50
   Hz; DC: 2 UM1 x 1,5 V
4. Max. current: 250 mA
5. Power output: 200 mW
6. Dimensions: 220 x 131 x 63 mm
7. Weight: 595 g

The manufacturer reserves the right to make changes to the characteristics of the device without prior notice.

The service life of the device is no less than five years.

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (73/23 EEC)

РУССКИЙ

FM/MW/SW 1-6 TO'LQINLARIDA ISHLAYDIGAN

SW4: 13.60-13.80 MGu

SW5: 15.10-15.60 MGц

SW6: 17.50-17.90 MGц

1. Ta'sirchanligi:

FM: 24 dBμ

MW: 74 dBμ

SW: 42 dBμ

1. Signal/shovqin nisbati: AM 42 dB

2. Dinamik: ∅ 92 mm/8 Om/1 Vt

3. Elektr quvvati manbai: AC: 220 V, 50 G _4 ; DC: 2 UM1 x 1,5 V

4. Ishlashi uchun lozim bo'ladigan elektr toki: 250 mA

5. CHiqish quvvati: 200 mVt

6. O'lchami: 220 x 131 x 63 mm

7. Og'irligi: 595 g

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxx means that the item was manufactured in June (the sixth month) 2006.

RUS