CLR2645P - Alarm clock radio Reflexion - Free user manual and instructions

Product Type	Alarm Clock Radio
Brand	Reflexion
Model	CLR2645P
Dimensions (approx.)	200 x 100 x 80 mm
Weight (approx.)	0.4 kg
Power Supply	AC 230V, 50Hz
Battery Backup	CR2032 (for time/alarm retention)
Radio Bands	FM, AM
Alarm Modes	Radio, Buzzer
Snooze Function	Yes (9 minutes)
Display Type	LED digital clock
Display Brightness	Adjustable (High/Low/Off)
Controls	Buttons for alarm, sleep, snooze, tuning, volume
Sleep Timer	Yes (up to 90 minutes)
Alarm Backup	Battery powered alarm if AC fails
Cleaning	Wipe with dry cloth; avoid liquids
Safety	Keep away from water; use only supplied adapter
Spare Parts	Contact manufacturer for replacement parts
Repairability	Consult qualified technician for repairs

Frequently Asked Questions - CLR2645P Reflexion

How do I set the alarm time?

Press and hold the ALARM button, then use the HOUR and MIN buttons to set the desired time. Release the ALARM button to confirm.

How do I switch between radio and buzzer alarm?

Repeatedly press the MODE button to cycle between radio alarm, buzzer alarm, and off. The corresponding icon will appear on the display.

Why is the display not showing?

Check if the power cord is plugged in. If using battery backup, ensure the CR2032 battery is inserted correctly. If still blank, try a factory reset by pressing the RESET button with a paperclip.

How do I set the radio station?

Press the RADIO ON/OFF button to turn on the radio. Use the TUNING knob or +/- buttons to find a station. Press and hold the MEMORY button, then select a preset slot with SET to store it.

Can I use headphones?

Yes, plug headphones into the PHONE jack on the side of the unit. The internal speaker will be muted.

How do I adjust the display brightness?

Press the DIMMER button repeatedly to cycle through brightness levels: High, Low, and Off (for sleep).

Does the alarm work if the power goes out?

Yes, if a CR2032 battery is installed, the clock and alarm time will be retained. However, the alarm will only sound via the buzzer (not radio) during power outage.

How do I clean the device?

Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use any liquid cleaners or spray directly onto the device.

What should I do if the alarm does not sound?

Check that the alarm mode is set (radio or buzzer) and the alarm time is correctly set. Ensure the volume is not turned down (for radio alarm). If still not working, reset the unit by pressing the RESET button.

How do I replace the backup battery?

Open the battery compartment on the bottom of the unit. Remove the old CR2032 battery and insert a new one with the positive (+) side facing up. Close the compartment securely.

USER MANUAL CLR2645P Reflexion

1. PROJEKTIONS-EINHEIT
2. FREQUENZBAND-WAHLSCHALTER AM/FM
3. SNOOZE / SLEEP -TASTE
4. EIN- / AUS -TASTE
5. ALARM 1 RADIO/SUMMER- TASTE
6. ALARM 2 RADIO/SUMMER- TASTE
7. AUDIO- EINGANGSBUCHSE (LINE IN)
8. TYPENSCHILD
9. RÜCKSTELL-TASTE
10. FOCUS-RAD ZUR SCHÄFEEINSTELLUNG DER PROJEKTION
11. PROJEKTIONSPOSITIONIERUNG 180°
12. PROJEKTION EIN/AUS-SCHALTER
13. TEMPERATUR SENSOR (INNEN)
14. UKW- ANTENNE
15. AC -NETZKABEL
16. ALARM-EINSTELLTASTE
17. << / MONAT-TAG / °C/°F -EINSTELLTASTE

18. / JAHR - EINSTELLTASTE

19. MODUS TASTE
20. DISPLAY-DIMMER
21. LCD DISPLAY
22. LAUTSTÄRKE-REGLER
23. SENDERWAHL
24. BATTERIEFACH
25. LAUTSPRECHER

SPEISUNG

HG = Quecksilber Pb = Blei

TECHNISCHE DATEN

1. PROJECTION UNIT
2. AM/FM BAND BUTTON
3. SNOOZE / SLEEP BUTTON
4. ON / OFF BUTTON
5. ALARM 1 RADIO/BUZZ BUTTON
6. ALARM 2 RADIO/BUZZ BUTTON
7. LINE IN JACK
8. RATING LABEL
9. RESET BUTTON
10. FOCUS ADJUSTMENT FOR PROJECTION UNIT
11. PROJECTION TIME 180° FLIP BUTTON
12. PROJECTION ON/OFF BUTTON
13. TEMPERATURE SENSOR (IN DOOR)
14. FM ANTENNA
15. AC POWER CORD
16. ALARM SET BUTTON
17. << / MONTH-DAY / °C/°F BUTTON

18. / YEAR / DST BUTTON

19. MODE BUTTON
20. DISPLAY LIGHT AUTO OFF / LOW / HIGH DIMMER
21. LCD DISPLAY
22. VOLUME KNOB
23. TUNING KNOB
24. BATTERY DOOR
25. SPEAKER

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back up system, it requires a 3V CR2032 flat lithium battery (not included). Insert the battery in the battery compartment, making certain that the positive and negative (+ and -) battery terminals are attached to the corresponding terminals on the plate in the battery compartment. If an AC power failure occurs; the clock and timer memory continue running. When the AC power resumes, the clock switches back to AC again.

1. TIME AND CALENDAR SETTING

A. Setting Time and Calendar – Press mode set button (19) in normal mode and keep depress over 2 seconds to enter time set mode, after enter the setting mode, press mode set button (19) to change the mode cycle as follows :

Normal → Year → Month → Day → 12/24 H → RTC Hour → RTC Min → Normal

Action (during data adjustment) :

• Press << / MONTH-DAY / °C/°F BUTTON (17) to adjust data backward.
• Press >> / YEAR / DST BUTTON (18) to adjust data forward.
• Keep depress << or >> button for 2 seconds to enable auto forward.

B. Setting Alarm 1 and Alarm 2 – Press Alarm set button (16) during normal mode and keep depress over 2 seconds to enter alarm set mode, after enter the setting mode, press Alarm set button (16) to change the mode cycle as follows :

Normal → AL 1 Hour → AL 1 Min → AL 1 weekend Alarm → AL 2 Hour → AL 2 Min → AL 2 weekend alarm → Normal

Select alarm weekday mode as follows

1-5 : Monday to Friday

1-7 : Whole week

6-7 : Saturday & Sunday

One day of week

Action (during data adjustment):

• Press << / MONTH-DAY / °C/°F BUTTON (17) to adjust data backward.
• Press>> / YEAR / DST BUTTON (18) to adjust data forward.
• Keep depress << or >> button for 2 seconds to enable auto forward.

2. SETTING ALARM OUTPUT AND ALARM ON/OFF

A. Change the alarm output

Press AL 1 (5) / AL 2 (6) button to music position to select wake up by Radio, set to Buzzer position to select wake up by Buzzer, set to Alarm off position to disable all alarm.

Select the Display Auto off / low / high dimmer (20) to the Auto off mode, alarm wake up the display is auto turn on.

3. ALARM DURATION AND SNOOZE FUNCTION

Alarm Duration – Buzzer alarm or Radio alarm will continue output for 30 minutes if no key press, then it will stop automatically and wait for same alarm time on next day.

Action for Snooze :

• During alarming, press Snooze button (3) will enable snooze function, Buzzer alarm or Radio alarm will stop.
• Snooze interval is 9 minute (not include second offset)
• Snooze will continue unless press On/Off button (4) to alarm off of Buzzer alarm or Radio Alarm stop automatically after 30 minutes.
• Select the display Auto Off / Low / High dimmer (20) to the auto off mode, during alarming display auto turn on, press snooze / sleep button (3) will enable snooze function, buzzer alarm or radio / display will stop & off.

4. CHANGE DISPLAY CONTENT

A. Press << / MONTH-DAY / °C/°F BUTTON (17) during normal can switch to display Year, after 5 seconds timeout and return back to display time.
B. Press >> / YEAR / DST BUTTON (18) during normal can switch to display Month/Day, after 5 seconds timeout and return back to display time.
C. Press << / MONTH-DAY / °C/°F BUTTON (17) and hold for 3 seconds to change temperature unit °C/°F

5. SLEEP FUNCTION

During radio on mode, press Snooze/Sleep button (3) to turn on Sleep mode, the sleep time will keep flashing by 5 seconds, within 5 seconds and press Sleep button can change the duration from 90 min – 15 min. Press On/Off button (4) to cancel sleep function.

6. RADIO OFF MODE

Select the display Auto OFF / LOW / HIGH dimmer (20) to the Auto OFF mode, the LCD display light will automatically off in 15 seconds.

- Press any key button to turn the display light on.

DST – Daylight saving time

Press >> / YEAR / DST BUTTON (18) and hold for 3 seconds to toggle on and off DST function.

RADIO OPERATION

• Press the On/Off button (4) to turn radio On.
• Select AM/FM band press the AM/FM band button (2).
• Select the station using the Tuning Knob (23).
• Turn the volume knob (22) to adjust volume as required.
• Press the On/Off button (4) to turn radio off.

Note :

• The AM band use an internal directional aerial, rotate the radio for best reception.
• Ensure that the FM antenna (14) is completely unrolled and extended for best FM reception.

SPECIFICATIONS

Frequency : AM 531 – 1620 kHz FM 87.5 – 108 MHz

Battery backup : 1 x 3V CR2032 flat lithium battery (not included)

Power source : AC 230V \~ 50Hz, 5W

Remark :

- Temperature range for indoor : 0 to +50°C or 32 to 122 °F

RESET

- The reset button (9) is located on the back of unit. Use a ballpoint pen to press it whenever you change the batteries, or unit is not performing as expected. This will return all settings to default value, and you will lose any stored data (alarm and clock settings).

PROJECTION UNIT

- Focus setting : Adjust the projection clock brightness/focus by turning the brightness/focus adjustment wheel (10) until the projected time is clearly shown on the ceiling or wall.

- To flip projected image by 180^ , press 180^ flip button (11).

NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.

MAXIMUN PROJECTION DISTANCE IS 3-9 FEET.

WARNING

1. No naked flame sources, such as lighted candles, should be placed on the apparatus.
2. Do not place the product in closed bookcases or racks without proper ventilation.
3. The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
4. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
5. It shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
6. Do not connect FM antenna to outside antenna.
7. The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibrations or placed in dusty environment.
8. Do not use abrasive, benzene, thinner or other solvents to clean the surface of the unit. To clean, wipe it will mild non-abrasive detergent solution and clean soft cloth.
9. Never attempt to insert wires, pins or other such objects into the vents or opening of the unit.
10. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
11. Class I LED product.
12. Do not dispose of electrical products in the general waste and ensure the used batteries are disposed safely according to your local authority and regulations.

CAUTION

Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type