MW-2030 - Hair Dryers Maxwell - Free user manual and instructions
Find the device manual for free MW-2030 Maxwell in PDF.
| Product Type | Hair Dryer |
| Brand | Maxwell |
| Model | MW-2030 |
| Power | 1875 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Heat Settings | 3 (Low, Medium, High) |
| Speed Settings | 2 (Low, High) |
| Cool Shot Button | Yes |
| Concentrator Nozzle | Yes |
| Diffuser | No |
| Removable Filter | Yes |
| Overheat Protection | Yes |
| Cord Length | 1.8 m |
| Weight | 0.5 kg |
| Dimensions (L x W x H) | 20 x 8 x 8 cm |
| Material | Plastic |
| Hanging Loop | Yes |
| Cleaning | Clean filter regularly with a brush |
| Storage | Store in a cool, dry place |
Frequently Asked Questions - MW-2030 Maxwell
User questions about MW-2030 Maxwell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Hair Dryers in PDF format for free! Find your manual MW-2030 - Maxwell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MW-2030 by Maxwell.
USER MANUAL MW-2030 Maxwell
natural_image
3D diagram of a mechanical component with multiple cylindrical protrusions and a base, labeled with number 8 (no text or symbols on the object itself)ФЕН MW-2030 BN
The hairdryer is intended for hair drying and styling.
DESCRIPTION
- Air supply speed switch (0/
- Heating degree switch (
-
Cool shot button
-
Nozzle
-
Air inlet grid (removable filter)
-
Handle
-
Hanging loop
-
Diffuser
ATTENTION!
- Do not use the unit near containers filled with water (such as bath, swimming pool etc.).
- After using the hairdryer in a bathroom, pull the plug out of the mains socket immediately, as water closeness is dangerous even if the unit is switched off.
- For additional protection you can install a residual current device (RCD) with nominal operation current not exceeding 30 mA into the bathroom mains; contact a specialist for installation.
SAFETY MEASURES
Before using the unit, read this instruction manual carefully and keep it for future reference.
Use the unit according to its intended purpose only, as it is stated in this user manual. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.
- Before switching the unit on, make sure that your home mains voltage corresponds to the unit operating voltage.
- To avoid fire, do not use adapters for connecting the unit to the mains.
• Use only the attachment supplied with the unit. - When using the unit, we recommend to unwind the power cord to its full length.
• The power cord should not: - touch hot objects,
-
run over sharp edges,
– be used for carrying the unit. -
Check the power cord and power plug insulation integrity periodically.
- Do not switch the unit on in places where aerosols are sprayed or highly inflammable liquids are used.
-
Hair spray should be applied only after hair styling is finished.
-
Do not operate the unit while taking a bath.
• Never leave the operating unit unattended. - Do not touch the unit body, the power cord and the power plug with wet hands.
• Take the switched on hairdryer by its handle only.
- Do not place and do not keep the unit in places where it can fall into a bath or a sink, filled with water, do not immerse the unit into water or other liquids.
- If the unit is dropped into water, unplug it immediately. And only then take it out of water.
- Do not use the unit when you are drowsy.
- Do not use the unit to style wet hair or synthetic wigs.
- Avoid contact of heated surfaces with your face, neck and other parts of your body.
- Do not drop the unit.
- During operation do not put the unit on heat-sensitive surfaces, soft surfaces (bed or sofa) and do not cover it.
- Do not direct hot air at your eyes or other heat-sensitive parts of your body.
- The nozzle gets hot during operation. Let it cool down before removal.
- Never insert any foreign objects into the unit body openings.
- Never block the air inlets of the hairdryer, do not place it on a soft surface, such as bed or sofa, where the air inlets may be blocked. Keep the air inlets free of lint, dust, hair etc.
- Avoid getting of hair into the air inlet grid during operation of the unit.
- Unplug the unit after every usage and before cleaning.
- When unplugging the unit, pull the plug but not the power cord.
- For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.
- Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
- Do not allow children under 8 years of age to touch the unit body, the power cord and the power plug during operation of the unit.
- Do not leave children unattended to prevent using the unit as a toy.
- Close supervision is necessary when children under 8 years of age or disabled persons are near the operating unit.
- This unit is not intended for usage by children under 8 years of age.
ENGLISH
- Children aged 8 and over as well as disabled persons can use this unit only under supervision of a person who is responsible for their safety, if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.
- To avoid damages, transport the unit in original package only.
- Never use the unit if the power cord or the plug is damaged, if the unit works improperly or after it was dropped. Do not try to repair the unit by yourself. Contact an authorized service center for all repair issues.
Keep the unit in a dry cool place out of reach of children and disabled persons.
After unit transportation or storage under cold (winter) conditions, it is necessary to keep it for at least two hours at room temperature before switching on.
- Before switching the unit on, make sure that your home mains voltage corresponds to unit operating voltage.
- Remove any stickers that can prevent unit operation.
- Unwind the power cord completely.
- Insert the power plug into the mains socket.
- Use the switch (1) to set the required air supply speed:
«0» – the hairdryer is off;
«» – low speed;
« » – high speed.
- Use the switch (2) to set the required temperature of the air flow:
Note: During the first operation some foreign smell and a small amount of smoke from the heating element is possible, this is normal.
- This model has a cool shot function, use it to fix your hairstyle. To make a cool shot switch the hairdryer on, then press and hold the button (3) ❖️.
Hair care
To get the best results, wash your hair with shampoo, remove excessive moisture with a towel and comb your hair, then start drying and styling it.
Quick drying
Set the switch (2) to maximal heating position « », select the required air supply speed using the switch (1) and dry your hair. Shake excessive moisture off your hair with your hand or a comb and constantly move the hairdryer above your hair.
Straightening
Set the switch (2) to maximal heating position « », select the required air supply speed using the switch (1) and dry your hair. When the hair is almost dry, switch the unit off, set the nozzle (4), decrease the heating degree using the switch (2) and reduce the air flow speed using the switch (1).
Divide your hair into locks, start straightening from lower layers. Using a plain or round brush, comb your hair from top to bottom and simultaneously direct hot air from the nozzle (4) at it. Slowly straighten each lock from root to end this way. After you finish straightening the lower locks, start to straighten the locks of the middle layer and finish with locks of the upper hair layer.
Natural wavy hairstyle
Set the switch (2) to the low heating position «1», select the low air supply speed by setting the switch (1) to the position «5», grip locks between fingers, turn them in the direction of natural curling. Dry your hair, directing the airflow at the area between fingers. Once the required effect is achieved, press and hold the cool shot button (3) and fix each lock.
Styling
Install the nozzle (4) in the hairdryer and then set the switches (2) and (1) to the low heating/speed position « ）»/« 5
Divide your hair into locks and style your hair with a round styling brush. During styling, direct the air flow straight at your hair.
If you want to fix the hairstyle, direct the cool shot at each lock for 2-5 seconds. Styling time depends on hair type; choose it by yourself.
Using the diffuser (8)
The air flow dispersed by diffuser provides soft drying and adds volume to your hair. Special
«fingers» volumize your hairstyle. Direct the air flow at the hair roots.
Overheating protection
Overheating protection switches the hairdryer off if the outgoing air is too hot. If the hair-dryer switches off during operation, set the switch (1) to the «0» position, unplug the hair-dryer and make sure that the inlets and outlets are unblocked. Let the hairdryer cool down for 5–10 minutes and switch it on again. Do not block the air inlets during unit operation and avoid getting of hair into its air inlet.
CLEANING AND CARE
The hairdryer is intended for household usage only.
- Set the switch (1) to the «0» position and unplug the hairdryer.
- Wipe the unit body with a damp cloth and then wipe it dry.
- Turn the grid (5) counterclockwise and remove it from the unit body. Clean the grid (5) with a brush and install the grid (5) back to its place.
- Never immerse the unit into water or other liquids.
- Do not use abrasives and solvents to clean the unit body.
STORAGE
- Unplug the hairdryer if you are not using it.
- Let the unit cool down after using it and keep it in a dry cool place out of reach of children.
- Never wind the power cord around the hair-dryer, as this can damage the cord. Handle
the power cord with care, do not pull, twist or stretch it, especially near the power plug or at the junction point. Straighten the cord periodically if it gets twisted during operation.
- For easy storage there is a hanging loop (7), you can hang the unit on this loop provided that no water gets on the unit in this position.
DELIVERY SET
Hairdryer - 1 pc.
Nozzle - 1 pc.
Diffuser - 1 pc.
Instruction manual - 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220–240 V \~ 50 Hz
Power consumption: 1800-2000 W
The manufacturer preserves the right to change the specifications of the unit without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)
КАЗАКША
ФЕН MW-2030 BN
A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.