IR 18e - Radio BLAUPUNKT - Free user manual and instructions

Product Type	Portable Internet Radio
Brand	Blaupunkt
Model	IR 18e
Dimensions (W x H x D)	180 x 120 x 60 mm
Weight	0.5 kg
Power Supply	DC 5V via USB (cable included) or 3 x AA batteries (not included)
Radio Bands	FM, DAB+, Internet Radio (Wi-Fi)
Bluetooth	Yes, for audio streaming
Display	2.4-inch color LCD
Alarm Clock	Dual alarm with snooze
Sleep Timer	Yes, adjustable
Audio Output	Built-in speaker (3W) and headphone jack
Connectivity	Wi-Fi 802.11 b/g/n, Bluetooth 4.0
Memory Presets	Up to 30 stations (FM/DAB+) and unlimited internet favorites
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use liquids or solvents.
Safety Warnings	Keep away from water and excessive heat. Use only supplied power adapter.
Spare Parts / Repairability	No user-serviceable parts inside. Contact authorized service center for repairs.

Frequently Asked Questions - IR 18e BLAUPUNKT

How do I turn on the Blaupunkt IR 18e for the first time?

Connect the device to power via USB or insert batteries. Press the Power button on the top panel. The display will light up. Follow the on-screen language selection and network setup wizard.

How do I connect to Wi-Fi?

Go to Menu > Network > Wi-Fi. Select your network from the list and enter the password using the rotary dial and keyboard. Ensure your router is broadcasting the 2.4 GHz band.

Why can't I find any DAB+ stations?

First, make sure the telescopic antenna is fully extended. Then go to DAB Radio > Full Scan. The radio will automatically search for all available stations. If still no stations, check your location's DAB coverage.

Can I listen to internet radio without a Wi-Fi connection?

No, internet radio requires a stable Wi-Fi connection. Alternatively, you can use FM or DAB+ modes which do not need internet.

How do I set an alarm?

Press the Alarm button or go to Menu > Alarms. Set the time, choose the alarm source (buzzer, FM, DAB+, or internet radio), adjust volume, and select days. Confirm to save.

What should I do if the device freezes or does not respond?

Perform a reset: use a paperclip to press the Reset hole on the back for 3 seconds. This will restore factory settings and may delete saved stations. Alternatively, unplug power and remove batteries for 30 seconds.

How do I update the firmware?

The radio checks for updates automatically when connected to Wi-Fi. To manually check, go to Menu > System > Firmware Update. If an update is available, follow the prompts. Do not turn off the device during update.

Can I play music from my phone via Bluetooth?

Yes. Activate Bluetooth on the radio (via Menu or dedicated button). On your phone, search for 'IR 18e' and pair. Once connected, audio from your phone will play through the radio's speaker.

What is the sleep timer and how do I use it?

The sleep timer automatically turns off the radio after a set time. Press the Sleep button repeatedly to select 15, 30, 60, 90, or 120 minutes, or 'Off'. The display will show the remaining time.

How do I clean the radio?

Always unplug the radio and remove batteries before cleaning. Use a soft, lint-free cloth slightly dampened with water (not wet). Gently wipe the exterior. Do not use chemical cleaners or allow moisture to enter openings.

USER MANUAL IR 18e BLAUPUNKT

WiFi Internet Radio

IR 18e

www.blaupunkt.com

Important Safety Instructions

Important Safety Instructions

Caution:

To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.

Explanation of Graphical Symbols:

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble free performance and listening pleasure.

Important Notes

· This safety and operating instruction should be retained for future reference. - The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.

- Do not install the product in the following areas:

• Places exposed to direct sunlight or close to radiators
• On top of other stereo equipment that radiates too much heat
• Blocking ventilation or in a dusty area
• Areas where there is constant vibration
• Humid or moist places.
• Do not place near candles or other naked flames
• Operate the product only as instructed in this manual
• Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

Conformity

Model number: IR 18e

Description: Wi-Fi Internet Radio

Brand name: Blaupunkt

Responsible party: M3 Electronic GmbH

Gutenbergstrasse 5, D-65830 Kriftel. Germany

Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

A letter of conformity can be obtained from [e-mail].

Safety Instructions

1. Read Instructions - All safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and user instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure that the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a plug having one blade wider than the other). This plug will fit onto the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry safety approval appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on, kinked or pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point where they exit from the product.
9. Overloading - Do not overload wall outlets, extension cords, or multiple sockets, as this can result in a risk of fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to rain, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. Dust in the woofer may be cleaned with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufacturer, as they may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug from the main power source or wall power source when not in use. When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 35°C.
27. ESD hints - If the product maybe reset or not reset to operation of control due to electrostatic discharge, just switch off and reconnect again, or move the product to another location.

ERP2 - (Energy related products) note

This product complies with the European Commission on Ecodesign Directive and its implementing Regulations Energy related products because the unit works with low voltage and current external power supplier. You can reference the regulation on EC No. 1275/2008 for details.

Warning

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this is only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. The unit should not be impeded by covering the ventilation opening with items such as newspaper, tablecloths, curtains, etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
6. The apparatus must not be exposed to dripping or splashing, and objects filled with liquids, such as vases, must not be placed on the apparatus.
7. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture, or dust.

8. Do not locate this unit near any water sources, e.g., taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.

9. Do not place this unit close to a strong magnetic field.

1. Do not place the unit on an amplifier or receiver.
2. Do not place this unit in a damp area as the moisture will affect the life of electric components.
3. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.

13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

1. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
2. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the TV screen. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
3. The mains plug is used as the disconnect device, the disconnect device must remain readily operable.

Product support / Accessory demand

1. Supports worldwide Internet stations
2. Supports WMA/MP3/OGG audio
3. Display screen resolution: 128px X 64px
4. Power supply: DC 5V 1500mA
5. Valid Wi-Fi Internet

Buttons and controls

Top view

1. STANDBY: Switch between Standby and On 2. PRESET: Store and recall stations 3. MENU: Main Menu 4. MODE: Switch between modes 5. NEXT: Move right 6. PREV: Move left/Last track 7. UP: Scroll Up 8. DOWN: Scroll Down 9. ENTER: Confirm 10. VOL+: Increase Volume 11. VOL-: Decrease Volume

Rear view

12. ON/OFF: Press for power ON/OFF 13. DC IN: DC Power in 14. Earphone jack: For earphone connection

Operation

1. Switch on Insert the power plug into the "DC" jack on the back of the radio and connect the power source. Turn the power switch to the ON position on the rear panel. The "BLAUPUNKT" logo will appear on the screen after the product is connected to power. The radio will automatically start searching for Wi-Fi networks; please wait while this is processing. When the search is complete, a number of valid network options will be shown on the LCD screen (if the network search has already been performed, it will skip the network list interface and automatically select and enter the network used last time). Press the UP or DOWN button to select a network, then press the ENTER button to confirm and enter that network. If this network has a password request, you will need to input the password to successfully enter the network.

Insert the power plug into the "DC" jack on the back of the radio and connect it to a power source. Turn the power switch on the rear panel to the ON position. The "BLAUPUNKT" logo will appear on the screen after the product is connected to power. The radio will automatically start searching for Wi-Fi networks; please wait while this is processing. When the search is complete, a number of valid network options will be shown on the LCD screen (if the network search has already been performed, it will skip the network list interface and automatically select and enter the network used last time). Press the UP or DOWN button to select a network, then press the ENTER button to confirm and enter that network. If the network requires a password, you will need to input the password to successfully connect.

How to input network password?

To input password, press UP or DOWN button to choose characters, press NEXT button to move on to the next character, press PREV button to move back and therefore delete character. Press ENTER to complete password entry. For the characters types available for this unit, please refer to the end of this manual.

2.FM

When the unit is powered on, press the MENU button to enter the main menu, choose FM, then press ENTER button into FM mode. You can also press the MODE button to reach the FM function.

Manual scan: in FM mode, press UP button to radio station scan up or DOWN button to radio station scan down. Press once will adjust the frequency 50KHZ per step.

Auto scan: in FM mode, press and hold NEXT button for roughly 2 seconds, to autoscan forward. To autoscan backwards, press and hold PREV button. When the radio detects a clear signal for a station, it will stop searching automatically and play. In FM mode, press ENTER button, it will search full range stations and store stations automatically. It can store up to 20 stations, you can get the preset number out by pressing PRESET button.

Note:

1. When preset stations exceed 20 quantity, this operation will cause the presets be covered.
2. There is only covered way for FM preset, no clear off way.

Preset stations: to preset your favorite radio stations press and hold the PRESET button until the preset icon and preset numbers appear on the screen, press UP or DOWN button to navigate to the number you would like to preset, then press the ENTER to confirm the preset. There are 20 preset stations available.

To get to a preset station: in FM mode, press PRESET button, the preset number will be shown on the screen, press UP or DOWN button to get to the preset number you are after, then press the ENTER to confirm. Now enjoy your favorite radio station!

Get better reception: In order to get better FM reception, please try to extent the FM telescope antenna, or put the radio next to the window. In order to reduce FM background noise, you can go to configuration manual, browse FM set up manual, select the mode as "MONO".

3. Tuneln

With the unit powered on, press the MENU button to get to the main menu, choose TuneIn and press ENTER to confirm. You can also press the MODE button to reach the TuneIn mode.

You will see the following selections on the LCD:

1. Browse Preset
2. Browse Stations
3. Search Stations
4. History

*This is an Internet radio mode. Before you select this mode, please check if you are connected to a valid Wi-Fi network.

*The default Internet station server is: http://tunein.com (TuneIn). It can search for Internet stations worldwide, and also allows you to quickly play local stations.

4. Media Center

When the unit is powered on, press the MENU button to access the media center, then press ENTER to enter it. After entering this mode, you will see the following selections:

1. UPNP: Press the MODE button to reach UPNP.

a. Your PC must be installed with Win Vista or Win7; Windows Media Player 11 or a later version, etc. Take Windows Media Player 11 as an example:

Open Windows Media Player on your PC, choose "Media Sharing" from the Media Library, confirm the "Media Sharing" position, and set data sharing in "Settings", then confirm and exit. b. Your PC must be on the same local wireless network.

c. Your media file must be positioned in the default folder of Windows Media Player.

d. Your PC should be set to allow link mode. In Windows Media Player, you can set both automatic allow and manual allow.

e. UPNP: choose the preset shared name in PC, then choose media folder, then choose media, and finally play media.

After entering the PC shared name, you can operate based on the default folder in your PC's Windows Media Player.

2. My Playlist

In the UPNP Music list, choose tracks and press ENTER for a few seconds to store them to My Playlist. The tracks in the Playlist will disappear if you switch off and then on again; you need to store the tracks again.

3. Clear My Playlist

In this mode, if you choose YES, it will clear all the tracks in My Playlist.

Information Center

With the unit powered on, press the MENU button to get to the main menu, then choose Information Center and press ENTER to confirm.

Here you can check the weather worldwide, stock information from the main stock exchange, and system information of the unit.

1. Weather Information

To check the weather, scroll to Weather Information and press ENTER to confirm. Here you can select your geographical region, country, and city to see the weather in your area.

Once you have reached the weather display, you can press the ENTER button to have the option whether to add your weather information to the Standby Display or not. To activate this, press the ENTER button again to add it to the standby display.

In the city weather information area, press DOWN or UP button to see the weather report for the current and next 4 days.

-In standby mode, if the weather report display has been activated, the display will alternate between "current time" and "current weather" every 10 seconds. You can also press the ENTER button to switch them quickly.

-In standby mode, the unit will display the weather information and maintain Internet connection.

-In standby mode, the screen can display the weather of the current day, or for the next 4 days. Press PREV or NEXT button to switch from the current weather report to reports for the next 4 days.

2. Financial Information

To check the stock markets, scroll to Stock Index Information and press the ENTER button to confirm. Here you can see a list of financial markets. Use the cursor to select the market of your choice. The market information will automatically scroll across the screen showing the relevant information.

3. System Information

To check the software version or system MAC address, scroll to MAIN MENU, then choose Information Center, then System Information, and press ENTER to confirm. Here you can see information on the software, or Wireless Info to check your wireless information such as MAC, ID, IP, etc.

Configuration

To change user settings, scroll to Configuration and press ENTER.

1. Network

Network Management

Main Menu → Configuration → Network → ENTER

1-1 Wireless Network Configuration

Here you can search networks automatically. The network list will be shown when the search is complete. Simply select your chosen network and input password if needed.

1-2 Manual Configuration

Select Wireless to enter into settings menu.

1-2.1 DHCP (Dynamic Host Configuration Protocol)

★ DHCP (On) Dynamic Host Configuration Protocol (on)

Select this item to detect a wifi network IP address and connect automatically.

★DHCP (Off) Dynamic Host Configuration Protocol (off)

Select this item to turn off the wifi detection and change it to a manual setting mode.

1-2.2 Enter SSID

1-2.3 Manage

Manage the manual configuration. If enter into the item, you can select and delete network history.

1-3 Check Network when Power network on/off status

Purpose for enable on: let the unit search internet stations automatically.

Purpose for disable off: skip the step of search internet stations automatically, and move to next menu.

2. Date &Time

Menu → Date and Time → ENTER

2-1 Set Date and Time

Press ENTER button to set time and date, fill in corresponding date and time, then press the ENTER to confirm.

2-2 Set Time Format

12 Hour system

24 Hour system

Scroll and press the ENTER to confirm.

2-3 Set Date Format

YY/MM/DD

DD/MM/YY

MM/DD/YY

Scroll and press the ENTER to confirm.

2-4 Daylight Saving Time (DST)

ON

Press the ENTER to confirm. This will put forward the time by 1 hour.

OFF

Press the ENTER to confirm. If the DST was turned on before, the time will move back by 1 hour.

2-5 GMT (02:41AM) server time GB

When the Internet radio is on, and there is no network connected, the time will be set automatically as 12:00AM. If it is connected to a network, the unit will show GMT, unless you have set the time manually before when it will show real time according to the variance between the time set before and the GMT time. (current GMT time + time variance)

Please kindly note GMT time is the time update information which unit got from network server, may different with the real time.

★You can only see this item rather than modify it.

3. Alarm

Menu → Configuration → Alarm → ENTER

a. you can set Alarm 1, Alarm 2, Nap Alarm

b. When the alarm time has finished, the unit will switch into standby mode.

c. Alarm volume can be set.

d. When the alarm rings press STANDBY button to turn off the current alarm or press any button except STANDBY to enter into 5mins' SNOOZE time.

e. The alarm will be repeated for one hour if it is not handled when the time arrives.

f. The alarm setting will only work once you have quit the alarm set menu.

g. When the current alarm is going, other alarms will be cancelled automatically; unless current alarm finished, the other alarm includes nap alarm will work when its time arrives.

h. After setting the alarm time, if you want to turn off this alarm time, you need to enter into alarm setting in main MENU to choose "OFF".

3-1 Alarm 1 (Turn off)

3-1.1 Turn On

Press ENTER to set Alarm 1.

Repeat: alarm mode

Everyday

Once: one time

Mon: Monday

Tue: Tuesday

Wed: Wednesday

Thu: Thursday

Fri: Friday

Sat: Saturday

Sun: Sunday

Choose Everyday to light up Monday through Sunday. It will only work for the next set time for one choice, but you can also choose specific days in a week. Move the cursor to the date you need and press ENTER to confirm. After you finish setting, press PREV to go back to the previous menu.

Time: set alarm time

Set alarm time procedure: select Turn On, then the screen shows the time in a format like 02:41 AM. You can set the time using the UP/DOWN/PREV/NEXT buttons, and press ENTER to confirm the alarm time you want.

Sound: sound mode

The alarm sound is set to Melody by default.

3-1.2 Turn Off

3-2 Alarm 2 (Turn off)

Follow the instructions above to set Alarm 2.

3-3 NAP Alarm (Turn off)

Nap alarm time options: Turn Off; 5 mins; 10 mins; 20 mins; 30 mins; 60 mins; 90 mins; 120 mins

Select Turn Off to disable the timing function:

-The countdown begins after you have finished setting the alarm. When the countdown finishes, the unit will switch to standby mode or ring automatically.

-Nap Alarm cannot use sound mode; it can only use traditional Beep mode.

-When the alarm sounds, press the STANDBY button to turn off the current alarm, or press any button except STANDBY to enter 5 minutes of SNOOZE time.

-If the alarm is not handled when it goes off, it will continue to sound for one hour.

3-4 Alarm Volume

Press ENTER to set the alarm volume; the default setting is 15.

Press the PREV/NEXT button to set the volume. After finishing, press ENTER or wait 3 seconds to confirm.

4. Language

Menu → Configuration → Language → ENTER

Supports 11 languages.

Press ENTER to confirm language after having selected the country.

5. Dimmer

Menu → Configuration → Dimmer → ENTER

5-1 Power Saving

Press ENTER button to set brightness mode, press PREV/NEXT button to set brightness. After finish set, press ENTER or wait 3 seconds to make done. This operation should set together with below item "5-3". If item "5-3" set "OFF", the dimmer will keep turn on; if dimmer has time limitation, the dimmer will enter into Dimmer Timer based on the time as item "5-3" sets. In Dimmer mode, the dimmer will recover to the most brightness status as long as press any button, and it will enter into Dimmer mode once it arrived at the Dimmer Time.

5-2 Turn On

Press ENTER button to set brightness mode, press PREV/NEXT button to set brightness. After finish set, press ENTER or wait 3 seconds to make done. Choose this operation; the dimmer will keep turn on.

5-3 Dimmer Timer

Use ENTER to select dimmer timing, such as 5 seconds, 10 seconds, 30 seconds, 60 seconds, 10 mins, 60 mins. If you choose "OFF", the dimmer will be kept turned on with the brightness as item "5-1" set, the other item will get the brightness as item "5-1" set, but need based on their according dimmer time.

6. Sleep Timer

Menu → Configuration → Sleep Timer → ENTER

You can select TURN OFF, 15mins, 30mins, 60mins, 90mins, 120mins,

150 mins, 180 mins.

Select "Turn OFF" to turn off this function; the countdown for sleep time begins automatically after you select the other sleep time, and there will be an icon showing the corresponding sleep time on the top right corner of the LCD screen.

7. Buffer

Menu → Configuration → Buffer → ENTER

You can set up the display auto-dimmer time by pressing ENTER to scroll and select timing for buffer at 2 seconds/4 seconds/8 seconds when you do not touch the unit.

8. Weather

Menu → Configuration → Weather → ENTER

8-1 Show ON Standby

8-2 Temperature Unit

Use ENTER to choose between Celsius and Fahrenheit.

8-3 Set Location

Choose area, then country and finally choose city and press ENTER to confirm add to standby display mode.

9. FM Setup

Menu → Configuration → FM setting → ENTER

Mode can set FM working status: Mono or Stereo. (The FM factory default set up mode is "Mono")

Area can set FM area: other Area or Japan.

10. Login TuneIn

To use this setting you must register for an account with http://tunein.com (TuneIn), and preset your favorite stations within your private account.

10-1 Login TuneIn

Input your private account name and password, press the ENTER to confirm, then you can go to your private registered account and listen to your favorite Internet stations.

10-2 Logout TuneIn

To logout: press the ENTER and delete your account name and password to avoid information disclosure.

11. DLNA Setup

Rename [iRadio], sync with PC name

12. Software Update

a. For factory use only (production and maintenance) b. Users can update software by network when there are software modifications.

13. Reset to Default

If you choose this function and confirm it the unit will reset to default mode and all the preset contents will be cancelled.

Headphone

Insert 3.5mm headphone into the "headphone" jack at the back of the unit, you can listen to the program via headphone with disconnected speaker sound.

Note: Below are the character types available for this unit.

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, DEL, @, space, !, ", #, \$, %, &, ' ( ), *, +, A, a, B, b, C, c, D, d, E, e, F, f, G, g, H, h, l, i, J, j, K, k, L, l, M, m, N, n, O, o, P, p, Q, q, R, r, S, s, T, t, U, u, V, v, W, w, X, x, Y, y, Z, z.

This unit does not support other character types. Please pay more attention when setting Wi-Fi or private account passwords.

Buttons to control character input:

NEXT: move right;

PREV: move back and delete;

UP: move forward to select character;

DOWN: move backward to select character.

Care and Maintenance

1. Children should be supervised when using this appliance.
2. Avoid operating your unit under direct sunlight or in hot, humid, or dusty places.
3. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.
4. Do not move the radio while it is connected to the mains supply via the adapter.
5. Clean the radio with a slightly damp cloth and do not use abrasive cleaners.

Troubleshooting

Symptom	Possible Problem Solution
The unit does not respond(no power)	1. DC adaptor is not plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit.	Plug the DC adaptor into a wall outlet and plug the connector into the supply jack on the unit.
	2. Wall outlet is not functioning.	Plug another device into the same outlet to confirm the outlet is working.
Sound is distorted	Volume level is set too high Decrease the volume
Unit gets warm after extended play at high volume	This is normal	Turn the unit off for a period of time or lower volume.

Specifications

Power Requirements:

DC Adaptor: Input: 100-240V~50/60Hz

Output: 5V/1500mA

Standby Power Consumption: <1W

Rated Output Power: 2W x 2

Dimension: 240 x 132 x 87mm

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased the product.

© All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH. This material may be reproduced, copied or distributed for personal use only.

BLAUPUNKT

Competence Center Audio

M3 Electronic GmbH

Gutenbergstrasse 5

D-65830 Kriftel - Germany

www.blaupunkt.com

Service Hotline Germany: Tel. [phone]

All rights reserved. All brand names are registered

trademarks of their respective owners. Specifications are

subject to change without prior notice.