Filter System Pro Classic 800 - Water pump Swim & Fun - Free user manual and instructions
Find the device manual for free Filter System Pro Classic 800 Swim & Fun in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Above-Ground Pool Water Pump |
| Model | Filter System Pro Classic 800 |
| Brand | Swim & Fun |
| Flow Rate | Approximately 8000 L/h (2110 GPH) |
| Power Consumption | 500 W |
| Voltage | 220-240 V, 50 Hz |
| Pump Type | Single-speed centrifugal pump |
| Maximum Head | 6 meters (19.7 ft) |
| Filter Compatibility | Compatible with sand, cartridge, or DE filters (sold separately) |
| Hose Connections | 1.5-inch (38 mm) diameter |
| Dimensions (L x W x H) | Approximately 350 x 200 x 250 mm |
| Weight | 8.5 kg (18.7 lbs) |
| Housing Material | Reinforced thermoplastic (durable and corrosion-resistant) |
| Motor Protection | Thermal overload protection with automatic reset |
| Ingress Protection | IPX4 (splash-proof) |
| Noise Level | < 70 dB(A) |
| Maintenance | Regularly clean strainer basket and impeller; check seals annually |
| Safety Features | Grounding pin, double insulation, and leak-proof connections |
| Spare Parts Available | Impeller, shaft seals, O-rings, and motor capacitor |
| Repairability | Replaceable motor and pump housing; common parts available |
| Warranty | 2 years (manufacturer defect) |
Frequently Asked Questions - Filter System Pro Classic 800 Swim & Fun
How do I install the Swim & Fun Filter System Pro Classic 800?
Connect the pump to the pool's skimmer and return lines using 1.5-inch hoses. Ensure the pump is placed on a stable, level surface and is plugged into a grounded outlet. Prime the pump by filling the strainer housing with water before starting.
What size pool is this pump suitable for?
The pump is designed for above-ground pools up to approximately 20,000 liters (5,300 gallons) with a standard filter system.
How often should I clean the strainer basket?
Check and clean the strainer basket weekly, or more frequently if you notice reduced water flow. A dirty basket stresses the pump and reduces efficiency.
Why is my pump not priming?
Common causes: air leaks in the suction line, clogged strainer basket, or insufficient water in the pump housing. Ensure all connections are tight and the basket is clean. Refill the housing with water and restart.
Can I run the pump 24/7?
Yes, the pump is designed for continuous operation. However, running it 8-12 hours per day is typically sufficient for proper water circulation and filtration.
What type of lubricant should I use on seals?
Use only silicone-based lubricant on O-rings and shaft seals. Petroleum-based products can damage the rubber and cause leaks.
How do I winterize the pump?
Drain all water from the pump housing and hoses. Remove the strainer basket and store the pump in a dry, frost-free location. Clean the impeller area of debris.
What does the thermal overload protection do?
It automatically shuts off the pump if the motor overheats, preventing damage. Once cooled, the pump will restart automatically. If it trips frequently, check for blockages or ventilation issues.
Where can I find spare parts?
Spare parts such as impellers, seals, and capacitors are available from Swim & Fun dealers or online retailers. See the user manual for part numbers.
Why is my pump making a loud noise?
Loud noise often indicates cavitation (low water flow), air in the system, or worn bearings. Check for blockages, ensure proper water level, and inspect the impeller for damage.
User questions about Filter System Pro Classic 800 Swim & Fun
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual Filter System Pro Classic 800 - Swim & Fun and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Filter System Pro Classic 800 by Swim & Fun.