PEW 9742 A - Range hood Philco - Free user manual and instructions
Find the device manual for free PEW 9742 A Philco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Philco |
| Model | PEW 9742 A |
| Width | 60 cm |
| Height (min-max) | 60-110 cm |
| Depth | 50 cm |
| Weight | 12 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 200 W |
| Max Extraction Capacity | 600 m³/h |
| Noise Level (max speed) | 65 dB(A) |
| Number of Speeds | 3 |
| Control Type | Electronic push buttons |
| Lighting | LED, 2 x 3 W |
| Grease Filter Type | Aluminum mesh, washable |
| Carbon Filter (optional) | Yes, for recirculation mode |
| Ducting Diameter | 150 mm |
| Installation Type | Wall-mounted or under cabinet |
| Cleaning Reminder | Alarm for filter cleaning |
| Automatic Shut-Off | Yes, after 24 hours of continuous operation |
| Spare Parts Available | Filters, LED bulbs, motor |
Frequently Asked Questions - PEW 9742 A Philco
How do I install the Philco PEW 9742 A range hood?
Ensure the wall is sturdy and the electrical outlet is nearby. Mount the bracket at the desired height (min 60 cm above gas hob, 50 cm above electric). Connect the ducting for evacuation or install carbon filters for recirculation. Secure the hood to the bracket and connect to mains.
Important: Follow the manual for exact measurements.
Important: Follow the manual for exact measurements.
How often should I clean the grease filters?
Grease filters should be cleaned every 2-3 months depending on usage. Remove them and wash with warm soapy water or in the dishwasher at low temperature. Dry completely before reinstalling.
Can the hood be used in recirculation mode?
Yes, it can be used in recirculation mode. You need to install activated carbon filters (sold separately) to absorb odors. The filters need replacing every 3-6 months.
Why is my range hood making loud noises?
Loud noise can be due to loose parts, unbalanced fan, or dirty filters. Check that the hood is properly mounted, clean the grease filters, and ensure no foreign objects are in the impeller. If noise persists, contact service.
How do I replace the LED lights?
Turn off the hood and disconnect power. Locate the LED module (under the hood). Twist or unclip the old LED module and replace with a new one of the same type (2 x 3 W). Reconnect power and test.
What is the recommended ducting diameter for exhaust?
The recommended ducting diameter is 150 mm. For best performance, keep duct length as short as possible and avoid sharp bends. Use smooth rigid ducting ideally.
How do I reset the filter cleaning alarm?
After cleaning or replacing filters, press and hold the filter alarm button (usually indicated by a symbol on the control panel) for about 3 seconds until the alarm LED turns off.
Is the Philco PEW 9742 A suitable for use over a gas hob?
Yes, but ensure the minimum distance between the hob and hood is at least 65 cm for gas hobs (or as specified in the manual). For electric hobs, the minimum is 50 cm.
Can I use the hood without the grease filters?
No, the grease filters are essential to protect the motor and prevent grease buildup. Operating without filters can damage the appliance and pose a fire risk. Always install clean filters.
What should I do if the hood doesn't turn on?
Check the power connection and circuit breaker. Ensure the hood is properly plugged in. If it still doesn't start, inspect the fuse (if any) or contact a qualified technician. Do not attempt to repair the motor yourself.
User questions about PEW 9742 A Philco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual PEW 9742 A - Philco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PEW 9742 A by Philco.