Q: Is the KING D HOME KDV 4Z 6000 cooking plate ceramic or induction?

The KING D HOME KDV 4Z 6000 cooking plate is a ceramic plate and not an induction plate. Differences between ceramic and induction Ceramic: uses electric resistances under a smooth glass surface. It heats the plate itself, which then transfers heat to the pots. Compatible with all types of utensils (metal, stainless steel, copper, etc.). Induction: works with a magnetic field that directly heats the bottom of magnetic utensils. Requires compatible pots (ferromagnetic). With a ceramic plate like the KING D HOME KDV 4Z 6000, you can use all your kitchen utensils without any material-related constraints. The temperature rise may be a bit slower than on an induction plate, but the use remains simple and versatile.

Q: What does the display "Lo" mean on the KING D HOME KDTIF 2ZS 7200 induction cooktop?

The display "Lo" on the KING D HOME KDTIF 2ZS 7200 induction cooktop indicates that the child lock is active . This is not a cooking power indication, but a safety mode that disables most control buttons to prevent accidental use. When the child lock is activated, all touch buttons are disabled except for two: the ON/OFF button and the child lock button itself. This means that children cannot accidentally change the cooking settings or activate the cooking zones. In case of an emergency, you can still turn off the cooktop with the ON/OFF button even if the lock is active. To deactivate the child lock: first ensure that the cooktop is on, then press and hold the child lock button for about 3 seconds. The device will beep, and the "Lo" display will disappear from the timer indicator. You can then use all control buttons normally. If you see "Lo" and you did not intentionally activate it, it is likely that someone (a child or another person) pressed the child lock button. Simply unlock it to restore normal operation of your cooktop.

Q: What does the symbol "Lo" on the KING D HOME KDV 4Z 6000 cooktop mean and how can I resolve it?

The "Lo" symbol displayed on your KING D HOME KDV 4Z 6000 cooktop generally indicates that the detected temperature is too low or there is a problem with heat detection. Here’s how to understand and resolve this issue: Meaning of the "Lo" Symbol This code often appears when: The cooktop does not detect a compatible cooking utensil or the utensil used is not suitable. The temperature of the cooking zone is too low to operate correctly. There is a temporary malfunction of the temperature sensor. Steps to Resolve the Issue Check the cooking utensil: Ensure that the pot or pan is compatible with your cooktop (for example, suitable for induction if it’s an induction cooktop) and that the bottom is flat. Properly position the utensil: Place it well in the center of the concerned cooking zone for proper detection. Wait a moment: If you have just removed a utensil, the symbol may appear temporarily. Allow the cooktop to stabilize. Restart the cooktop: Turn it off completely, wait a few seconds, then turn it back on to reset the sensors. Check the power supply: Ensure that the cooktop is properly plugged in and powered. If the "Lo" symbol persists despite these checks, it may indicate a technical problem requiring the intervention of a professional or customer service.

Question 1

Is the KING D HOME KDV 4Z 6000 cooking plate ceramic or induction?

Accepted Answer

The KING D HOME KDV 4Z 6000 cooking plate is a ceramic plate and not an induction plate.

Differences between ceramic and induction

Ceramic: uses electric resistances under a smooth glass surface. It heats the plate itself, which then transfers heat to the pots. Compatible with all types of utensils (metal, stainless steel, copper, etc.).
Induction: works with a magnetic field that directly heats the bottom of magnetic utensils. Requires compatible pots (ferromagnetic).

With a ceramic plate like the KING D HOME KDV 4Z 6000, you can use all your kitchen utensils without any material-related constraints. The temperature rise may be a bit slower than on an induction plate, but the use remains simple and versatile.

Question 2

What does error code E3 mean on the KING D HOME KDV 4Z 6000 cooktop and how can it be resolved?

Accepted Answer

The error code E3 on the KING D HOME KDV 4Z 6000 cooktop indicates a problem related to the temperature sensor or overheating protection. Your cooktop has an automatic thermal protection: a sensor constantly monitors the temperature in the cooking zones and automatically turns them off if the temperature exceeds a safe level. The display of code E3 signals that this protection system has been triggered.

Here’s how to resolve this issue:

Turn off the cooktop immediately: Press the stop button (or hold down the Power button), then unplug the device from the electrical outlet to completely stop the power supply.
Let it cool down: Wait at least 30 to 45 minutes to allow the cooktop to cool completely. Do not attempt to restart it before this time.
Check the ventilation: Ensure that the ventilation openings located under the cooktop are not blocked by dust, hair, or other debris. Poor air circulation causes excessive heat buildup.
Check the utensils used: Only use pots and pans suitable for ceramic glass, with a flat and smooth bottom. Inappropriate utensils or those with a curved bottom can concentrate heat abnormally and trigger thermal protection.
Restart under normal conditions: Plug the cooktop back in and restart it. The error code should disappear. If the problem persists, it indicates a failure of the temperature sensor or an internal malfunction of the cooktop.

If after complete cooling and these checks the E3 code reappears, there is likely a technical problem with the thermal sensor. Contact KING D HOME customer service at 04 88 78 59 99 or a certified repair technician for professional intervention. Do not attempt to disassemble the device yourself, as this could be dangerous and void your warranty.

Question 3

What should I do if the temperature display is flashing and then turns off on my KING D HOME KDTIF 2ZS 7200 induction cooktop?

Accepted Answer

If the temperature display is flashing and then turns off on your KING D HOME KDTIF 2ZS 7200 induction cooktop, it may indicate several situations to check:

1. Check the compatibility of cookware

Ensure that the pots or pans used are compatible with induction. They should have a magnetic base, typically made of stainless steel, cast iron, or specially designed for induction.

2. Positioning of cookware

Properly place the pot on the cooking zone, ensuring it is centered and large enough to be detected by the cooktop. Incorrect positioning can cause the display to flash.

3. Detection and safety system

The cooktop has a safety system that prevents it from operating if no compatible pot is detected. Try removing and then repositioning the pot to reactivate detection.

4. Overheating of the cooktop

If the cooktop is too hot, it may automatically turn off to prevent damage. Allow it to cool down for a few minutes before turning it back on.

5. Electrical check

Check that the cooktop is properly plugged in and that the outlet is functioning correctly. You can unplug and then plug the device back in to reset its operation.

By following these steps, you should be able to identify and resolve the issue of the flashing temperature display on your cooktop. If the problem persists, it may be necessary to consult a professional for a more in-depth diagnosis.

Question 4

Why is my KING D HOME KDTIF 2ZS 7200 induction cooktop flashing alternatingly "F" and "d"?

Accepted Answer

The alternating flashing of "F" and "d" on your KING D HOME KDTIF 2ZS 7200 cooktop indicates a detection error. This means that the cooktop is not correctly detecting the presence of a compatible pot on the cooking zone. It is a safety mechanism: without a suitable pot, the cooktop refuses to operate to prevent overloads and dangers related to unintentional activation.

The three main causes of this flashing are:

Incompatible pot: The KDTIF 2ZS 7200 induction cooktop requires a pot with a ferromagnetic base. If you are using an aluminum, copper, or glass pot, detection will fail. Check that your utensil attracts a magnet on its base.
Poor positioning: The pot must be correctly centered on the cooking zone. If it is too small, on the edge of the zone, or slightly off-center, the detection sensors will not recognize it. Reposition it in the center of the zone.
Obstructed or dirty sensors: Residues, dirt, spilled water, or crumbs on the edges of the cooking zone can disrupt the sensors. Ensure that the surface and contours of the zone are perfectly clean and dry.

Here’s how to resolve the issue: First, turn off the cooktop by pressing the ON/OFF button for a few seconds. Check that your pot has a ferromagnetic base by testing it with a magnet. Clean the cooking zone with a dry cloth, removing dust and residues. Reposition the pot well in the center of the zone, then turn it on. If the problem persists with your usual pot, try with another compatible utensil to confirm that it is a pot issue and not a cooktop issue.

If the code continues to flash with a compatible and well-positioned pot, or if you observe other error codes (such as E1, B3, or Es), turn off the cooktop, unplug it for a minute, then plug it back in to reset the system. If the issue persists, this indicates an electronic malfunction that requires professional intervention. The "F/d" code itself does not clear on its own — it only disappears when you place a correctly detected compatible pot on the zone.

Question 5

What does the display "Lo" mean on the KING D HOME KDTIF 2ZS 7200 induction cooktop?

Accepted Answer

The display "Lo" on the KING D HOME KDTIF 2ZS 7200 induction cooktop indicates that the child lock is active. This is not a cooking power indication, but a safety mode that disables most control buttons to prevent accidental use.

When the child lock is activated, all touch buttons are disabled except for two: the ON/OFF button and the child lock button itself. This means that children cannot accidentally change the cooking settings or activate the cooking zones. In case of an emergency, you can still turn off the cooktop with the ON/OFF button even if the lock is active.

To deactivate the child lock: first ensure that the cooktop is on, then press and hold the child lock button for about 3 seconds. The device will beep, and the "Lo" display will disappear from the timer indicator. You can then use all control buttons normally.

If you see "Lo" and you did not intentionally activate it, it is likely that someone (a child or another person) pressed the child lock button. Simply unlock it to restore normal operation of your cooktop.

Question 6

What are the dimensions of the KING D HOME induction cooktop KDTIF 2ZS 7200?

Accepted Answer

The KING D HOME induction cooktop model KDTIF 2ZS 7200 has the following dimensions:

Width: 60 cm
Depth: 52 cm
Height: 5.5 cm

These measurements correspond to the total footprint of the cooktop, which is useful for checking its installation in a countertop or dedicated space. Make sure your location can accommodate these dimensions for optimal installation.

Question 7

What are the installation dimensions for the KING D HOME KDV 3Z 5400 ceramic cooktop?

Accepted Answer

To properly install your KING D HOME KDV 3Z 5400 ceramic cooktop, you must adhere to the following installation dimensions: 560 mm in width and 490 mm in depth. These dimensions correspond to the cutout you need to make in your countertop.

The minimum required thickness of the countertop is 30 mm. For good thermal dissipation, choose a heat-resistant and easy-to-clean material, such as ceramic or a countertop specially treated against heat.

When cutting, you must maintain a free space of at least 50 mm (5 cm) around the hole to ensure proper ventilation and accessibility of the appliance. After cutting, be sure to seal the cut edges of the countertop with silicone or PTFE and allow to dry before installing the cooktop.

Ensure that your countertop is perfectly flat and stable. The built-in KING D HOME KDV 3Z 5400 appliance has external dimensions of 590 x 520 x 52 mm (width x depth x height). All installation work should be carried out by a competent person or a qualified electrician to ensure the safety and proper functioning of your cooktop.

Question 8

What does the symbol "Lo" on the KING D HOME KDV 4Z 6000 cooktop mean and how can I resolve it?

Accepted Answer

The "Lo" symbol displayed on your KING D HOME KDV 4Z 6000 cooktop generally indicates that the detected temperature is too low or there is a problem with heat detection. Here’s how to understand and resolve this issue:

Meaning of the "Lo" Symbol

This code often appears when:

The cooktop does not detect a compatible cooking utensil or the utensil used is not suitable.
The temperature of the cooking zone is too low to operate correctly.
There is a temporary malfunction of the temperature sensor.

Steps to Resolve the Issue

Check the cooking utensil: Ensure that the pot or pan is compatible with your cooktop (for example, suitable for induction if it’s an induction cooktop) and that the bottom is flat.
Properly position the utensil: Place it well in the center of the concerned cooking zone for proper detection.
Wait a moment: If you have just removed a utensil, the symbol may appear temporarily. Allow the cooktop to stabilize.
Restart the cooktop: Turn it off completely, wait a few seconds, then turn it back on to reset the sensors.
Check the power supply: Ensure that the cooktop is properly plugged in and powered.

If the "Lo" symbol persists despite these checks, it may indicate a technical problem requiring the intervention of a professional or customer service.

Question 9

How to unlock the cooking zones of the KING D HOME KDV 4Z 6000 cooktop?

Accepted Answer

The KING D HOME KDV 4Z 6000 cooktop does not have a physical lock for the cooking zones themselves, but a touch control lock system (child safety feature). If your zones seem locked, it is usually because this lock mode is activated.

To unlock the controls, follow these steps:

Make sure the ceramic cooktop is turned on by pressing the ON/OFF button for 1 second.
Press simultaneously the “-” (minus) button and the selection key for the rightmost zone (zone 4).
The indicator displays “Lo” (for locked) when the mode is active. Once unlocked, you can use all controls normally.

It is important to note that when the cooktop is locked, only the off function remains operational, allowing you to turn off the cooktop in case of an emergency, but you will not be able to change power settings or select zones until you have unlocked the controls.

If the lock has been activated accidentally (for example, by pressing “-” and zone 4 simultaneously for more than one second), simply repeat the same action to deactivate it. This feature is particularly useful to protect your cooktop from unintentional handling by children.

User manual KING D HOME : user manuals and guides in PDF

Models KING D HOME most viewed

Browse manuals KING D HOME by appliance type

Recent questions about devices KING D HOME