Q: Is the KING D HOME KDV 4Z 6000 cooking plate ceramic or induction?

The KING D HOME KDV 4Z 6000 cooking plate is a ceramic plate and not an induction plate. Differences between ceramic and induction Ceramic: uses electric resistances under a smooth glass surface. It heats the plate itself, which then transfers heat to the pots. Compatible with all types of utensils (metal, stainless steel, copper, etc.). Induction: works with a magnetic field that directly heats the bottom of magnetic utensils. Requires compatible pots (ferromagnetic). With a ceramic plate like the KING D HOME KDV 4Z 6000, you can use all your kitchen utensils without any material-related constraints. The temperature rise may be a bit slower than on an induction plate, but the use remains simple and versatile.

Q: What does the symbol "Lo" on the KING D HOME KDV 4Z 6000 cooktop mean and how can I resolve it?

The "Lo" symbol displayed on your KING D HOME KDV 4Z 6000 cooktop generally indicates that the detected temperature is too low or there is a problem with heat detection. Here’s how to understand and resolve this issue: Meaning of the "Lo" Symbol This code often appears when: The cooktop does not detect a compatible cooking utensil or the utensil used is not suitable. The temperature of the cooking zone is too low to operate correctly. There is a temporary malfunction of the temperature sensor. Steps to Resolve the Issue Check the cooking utensil: Ensure that the pot or pan is compatible with your cooktop (for example, suitable for induction if it’s an induction cooktop) and that the bottom is flat. Properly position the utensil: Place it well in the center of the concerned cooking zone for proper detection. Wait a moment: If you have just removed a utensil, the symbol may appear temporarily. Allow the cooktop to stabilize. Restart the cooktop: Turn it off completely, wait a few seconds, then turn it back on to reset the sensors. Check the power supply: Ensure that the cooktop is properly plugged in and powered. If the "Lo" symbol persists despite these checks, it may indicate a technical problem requiring the intervention of a professional or customer service.

Question 1

Is the KING D HOME KDV 4Z 6000 cooking plate ceramic or induction?

Accepted Answer

The KING D HOME KDV 4Z 6000 cooking plate is a ceramic plate and not an induction plate.

Differences between ceramic and induction

Ceramic: uses electric resistances under a smooth glass surface. It heats the plate itself, which then transfers heat to the pots. Compatible with all types of utensils (metal, stainless steel, copper, etc.).
Induction: works with a magnetic field that directly heats the bottom of magnetic utensils. Requires compatible pots (ferromagnetic).

With a ceramic plate like the KING D HOME KDV 4Z 6000, you can use all your kitchen utensils without any material-related constraints. The temperature rise may be a bit slower than on an induction plate, but the use remains simple and versatile.

Question 2

What does error code E3 mean on the KING D HOME KDV 4Z 6000 cooktop and how can it be resolved?

Accepted Answer

The error code E3 on the KING D HOME KDV 4Z 6000 cooktop indicates a problem related to the temperature sensor or overheating protection. Your cooktop has an automatic thermal protection: a sensor constantly monitors the temperature in the cooking zones and automatically turns them off if the temperature exceeds a safe level. The display of code E3 signals that this protection system has been triggered.

Here’s how to resolve this issue:

Turn off the cooktop immediately: Press the stop button (or hold down the Power button), then unplug the device from the electrical outlet to completely stop the power supply.
Let it cool down: Wait at least 30 to 45 minutes to allow the cooktop to cool completely. Do not attempt to restart it before this time.
Check the ventilation: Ensure that the ventilation openings located under the cooktop are not blocked by dust, hair, or other debris. Poor air circulation causes excessive heat buildup.
Check the utensils used: Only use pots and pans suitable for ceramic glass, with a flat and smooth bottom. Inappropriate utensils or those with a curved bottom can concentrate heat abnormally and trigger thermal protection.
Restart under normal conditions: Plug the cooktop back in and restart it. The error code should disappear. If the problem persists, it indicates a failure of the temperature sensor or an internal malfunction of the cooktop.

If after complete cooling and these checks the E3 code reappears, there is likely a technical problem with the thermal sensor. Contact KING D HOME customer service at 04 88 78 59 99 or a certified repair technician for professional intervention. Do not attempt to disassemble the device yourself, as this could be dangerous and void your warranty.

Question 3

What does the symbol "Lo" on the KING D HOME KDV 4Z 6000 cooktop mean and how can I resolve it?

Accepted Answer

The "Lo" symbol displayed on your KING D HOME KDV 4Z 6000 cooktop generally indicates that the detected temperature is too low or there is a problem with heat detection. Here’s how to understand and resolve this issue:

Meaning of the "Lo" Symbol

This code often appears when:

The cooktop does not detect a compatible cooking utensil or the utensil used is not suitable.
The temperature of the cooking zone is too low to operate correctly.
There is a temporary malfunction of the temperature sensor.

Steps to Resolve the Issue

Check the cooking utensil: Ensure that the pot or pan is compatible with your cooktop (for example, suitable for induction if it’s an induction cooktop) and that the bottom is flat.
Properly position the utensil: Place it well in the center of the concerned cooking zone for proper detection.
Wait a moment: If you have just removed a utensil, the symbol may appear temporarily. Allow the cooktop to stabilize.
Restart the cooktop: Turn it off completely, wait a few seconds, then turn it back on to reset the sensors.
Check the power supply: Ensure that the cooktop is properly plugged in and powered.

If the "Lo" symbol persists despite these checks, it may indicate a technical problem requiring the intervention of a professional or customer service.

Question 4

How to unlock the cooking zones of the KING D HOME KDV 4Z 6000 cooktop?

Accepted Answer

The KING D HOME KDV 4Z 6000 cooktop does not have a physical lock for the cooking zones themselves, but a touch control lock system (child safety feature). If your zones seem locked, it is usually because this lock mode is activated.

To unlock the controls, follow these steps:

Make sure the ceramic cooktop is turned on by pressing the ON/OFF button for 1 second.
Press simultaneously the “-” (minus) button and the selection key for the rightmost zone (zone 4).
The indicator displays “Lo” (for locked) when the mode is active. Once unlocked, you can use all controls normally.

It is important to note that when the cooktop is locked, only the off function remains operational, allowing you to turn off the cooktop in case of an emergency, but you will not be able to change power settings or select zones until you have unlocked the controls.

If the lock has been activated accidentally (for example, by pressing “-” and zone 4 simultaneously for more than one second), simply repeat the same action to deactivate it. This feature is particularly useful to protect your cooktop from unintentional handling by children.

User manual KING D HOME Hob : user manuals and guides in PDF

Models KING D HOME Hob most viewed

Other categories KING D HOME

Recent questions about Hob KING D HOME