How to pair a ONEARZ P190 wireless speaker with a Bluetooth device?

Question

Accepted Answer

To pair your ONEARZ P190 wireless speaker with a Bluetooth device, follow these simple steps:

1. Turn on the speaker

Press the power button on the speaker until you hear a sound signal or the indicator light turns on.

2. Activate Bluetooth pairing mode

Press the Bluetooth button on the speaker (usually marked with a Bluetooth symbol) for a few seconds. A sound signal should indicate that the speaker is in pairing mode, and the Bluetooth indicator will blink.

3. Enable Bluetooth on your device

On your smartphone, tablet, or other device, open the Bluetooth settings and enable the Bluetooth function if it is not already done.

4. Select the speaker from the list of available devices

In the list of detected Bluetooth devices, look for "ONEARZ P190" or a similar name. Select it to initiate the connection.

5. Confirm the pairing

Once the connection is established, you will hear a sound signal confirming the successful pairing. The Bluetooth indicator on the speaker will stop blinking and remain on.

6. Check the connection

Play music or sound on your device to check that the sound is being played through the speaker.

Troubleshooting tips

Make sure your device is close to the speaker.
Check that no other device is already connected to the speaker.
Restart the speaker and your device if necessary to reset the Bluetooth connection.

User manual ONEARZ : user manuals and guides in PDF

Models ONEARZ most viewed

Browse manuals ONEARZ by appliance type

Recent questions about devices ONEARZ