Question 1

What should I do if my ULTIMATE EARS BOOM 2 Bluetooth speaker is no longer producing sound?

Accepted Answer

If your ULTIMATE EARS BOOM 2 Bluetooth speaker is not producing sound, here are several steps to follow to identify and resolve the issue:

1. Check the battery charge

Make sure your speaker is sufficiently charged. Plug it into a power source and let it charge for at least an hour before trying again.

2. Restart the speaker

Turn off the speaker by holding the power button for a few seconds, then turn it back on. This may resolve some temporary malfunctions.

3. Check the Bluetooth connection

Ensure that your device (smartphone, tablet, computer) is properly connected to the speaker.
Disconnect and then reconnect the Bluetooth connection.
Try connecting the speaker to another device to check if the problem lies with the source.

4. Check the volume

Make sure the speaker's volume is turned up and that it is not in silent mode.
Also check the volume of the source device.

5. Reset the speaker

If none of the previous steps work, you can reset your BOOM 2:

Press and hold the power button and the volume + button simultaneously for about 10 seconds.
Release the buttons as soon as you hear a sound indicating that the reset is complete.

After the reset, reconnect your speaker to your device and test the sound again.

By following these tips, you should be able to resolve most issues related to the absence of sound on your ULTIMATE EARS BOOM 2 speaker.

Question 2

How do I connect my phone to the ULTIMATE EARS BOOM 2 Bluetooth speaker?

Accepted Answer

To connect your phone to the ULTIMATE EARS BOOM 2 Bluetooth speaker, follow these simple steps:

1. Turn on the speaker

Press the power button located on the top of the speaker. You will hear a sound indicating that the speaker is on, and a LED light will turn on.

2. Activate Bluetooth pairing mode

Press the Bluetooth button (Bluetooth symbol) on the speaker. The Bluetooth light will start flashing, which means the speaker is ready to be connected.

3. Turn on Bluetooth on your phone

Open your phone's Settings.
Go to the Bluetooth section and turn it on if it is not already enabled.

4. Search for and select the speaker

In the list of available devices, look for "BOOM 2".
Tap "BOOM 2" to initiate the connection.

5. Connection confirmation

Once connected, you will hear a confirmation sound from the speaker and the Bluetooth light will become steady.

Additional tips

If "BOOM 2" does not appear in the list, make sure the speaker is in pairing mode (the Bluetooth light is flashing). If not, repeat step 2.
If another device is already connected to the speaker, disconnect it before trying to connect your phone.

User manual ULTIMATE EARS : user manuals and guides in PDF

Models ULTIMATE EARS most viewed

Browse manuals ULTIMATE EARS by appliance type

Recent questions about devices ULTIMATE EARS