Q: How do I pair my ALBRECHT BPA 600 via Bluetooth?

Bluetooth Pairing of the ALBRECHT BPA 600 First connection: Turn off the BPA 600 Press and hold the function button for 5 seconds The device will turn on and enter pairing mode (alternating red and blue flashing, voice announcement "Pairing") Enable Bluetooth on your phone and search for "BPA 600" Select the BPA 600 to establish the connection When the LED turns solid blue , pairing is successful (voice confirmation) Automatic connection: The BPA 600 automatically reconnects to the last paired device on startup. You can pair up to two Bluetooth devices by repeating the above steps for each device.

Q: How many steps are needed to listen to a favorite station saved on the DR 55?

That's correct, 4 steps in total: Power On – Press the power button. The Albrecht logo appears on the screen. Select DAB+ mode – Press the MODE button to switch to DAB+ (if you are not already there). The device displays the available stations. Access Favorites – Press the Favorites button to display your list of saved stations (40 slots available on the DR 55). Select your favorite – Turn the rotary knob to browse your favorites and press it to confirm and start listening. Once your favorites are saved (by long pressing the Favorites button), you can quickly find them in just 4 actions.

Q: Does the DR 55 turn on automatically when the car is started?

No, the DR 55 does not turn on automatically when the car is started. You must manually press the Power button to start the device. Once the device is turned on via the Power button, the Albrecht logo appears on the screen and the device automatically searches for all available DAB+ stations (a progress bar is displayed during this search). However, this automatic search only begins after you have manually activated the device. It is therefore a two-step process: manual activation of the DR 55 -> then automatic search for DAB+ stations.

Q: How to access the Configuration menu on the DR 463+ remote control?

Accessing the Configuration menu of the ALBRECHT DR 463+: Press the HOME button on the remote control to open the main menu Use the directional buttons ▲ (up) and ▼ (down) to navigate to Configuration Press OK to access the Configuration menu In the Configuration menu, you will find about 23 options: WiFi Management (to enter your WiFi key) Language Date and time Alarm (3 alarms available) Bluetooth Equalizer and FM settings Screen brightness Reset to factory settings And many other options... General menu navigation: ▲▼ = navigate up/down ◀▶ = previous/next menu OK = confirm a selection

Q: How to set the language to French on the DR 463+?

On the DR 463+ , the language selection is made at the first power-on of the device: Turn on the device The 2.4-inch color TFT screen will automatically display a request for "select your language" Use the arrow keys to navigate to French Press the OK button to confirm your choice If you have already set the device to another language: access the Settings menu from the home screen to find and change the language setting. The arrow keys and the OK button allow navigation through all menus.

Q: How to set the weather position on the ALBRECHT DR 471 radio?

To set the weather position on your ALBRECHT DR 471 radio, there are two main steps: first select your city, then activate the weather display. Step 1: Select your city for the weather Press the Information-Center button to access the information center. Select Weather Information . First choose your country , then your city from the 5000 available cities. Once positioned on your city, press OK to set this city as the weather display. You can check the weather forecasts by pressing the ◄/► buttons to see the following days. Step 2: Configure the display in standby mode Go to the Settings menu. Access the Weather section. Activate Standby Display so that the weather is displayed in standby mode. Set the temperature unit : choose °C (Celsius) or °F (Fahrenheit). Once this configuration is complete, the display will alternate between the time and weather information when the radio is in standby mode. If you change location, repeat the city selection in the information center. The radio automatically detects your location based on your IP address for local stations, but the weather position must be configured manually via city selection.

Question 1

How do I pair my ALBRECHT BPA 600 via Bluetooth?

Accepted Answer

Bluetooth Pairing of the ALBRECHT BPA 600

First connection:

Turn off the BPA 600
Press and hold the function button for 5 seconds
The device will turn on and enter pairing mode (alternating red and blue flashing, voice announcement "Pairing")
Enable Bluetooth on your phone and search for "BPA 600"
Select the BPA 600 to establish the connection
When the LED turns solid blue, pairing is successful (voice confirmation)

Automatic connection:

The BPA 600 automatically reconnects to the last paired device on startup. You can pair up to two Bluetooth devices by repeating the above steps for each device.

Question 2

Does the radio remember the last DAB+ station listened to?

Accepted Answer

No, the DR 55 does not automatically remember the last station listened to. According to the manual, upon startup, the device automatically searches for all receivable DAB+ stations and saves them in the station list, but it does not resume playback of the previously listened station.

However, the DR 55 offers two practical alternatives:

Personal Favorites: You have 40 favorite slots. To save a station as a favorite, select it and then press and hold the Favorites button until confirmed. The next time you use it, you can directly access your favorite stations via the Favorites button.
Service Following: When you listen to a DAB+ station, the device automatically switches to the best frequency if the station leaves your reception area, ensuring continuous listening.

If you want your device to quickly find your last station, consider adding it to your favorites for quick access during subsequent power-ups.

Question 3

How many steps are needed to listen to a favorite station saved on the DR 55?

Accepted Answer

That's correct, 4 steps in total:

Power On – Press the power button. The Albrecht logo appears on the screen.
Select DAB+ mode – Press the MODE button to switch to DAB+ (if you are not already there). The device displays the available stations.
Access Favorites – Press the Favorites button to display your list of saved stations (40 slots available on the DR 55).
Select your favorite – Turn the rotary knob to browse your favorites and press it to confirm and start listening.

Once your favorites are saved (by long pressing the Favorites button), you can quickly find them in just 4 actions.

Question 4

Does the DR 55 turn on automatically when the car is started?

Accepted Answer

No, the DR 55 does not turn on automatically when the car is started. You must manually press the Power button to start the device.

Once the device is turned on via the Power button, the Albrecht logo appears on the screen and the device automatically searches for all available DAB+ stations (a progress bar is displayed during this search). However, this automatic search only begins after you have manually activated the device.

It is therefore a two-step process: manual activation of the DR 55 -> then automatic search for DAB+ stations.

Question 5

How to access the Configuration menu on the DR 463+ remote control?

Accepted Answer

Accessing the Configuration menu of the ALBRECHT DR 463+:

Press the HOME button on the remote control to open the main menu
Use the directional buttons ▲ (up) and ▼ (down) to navigate to Configuration
Press OK to access the Configuration menu

In the Configuration menu, you will find about 23 options:

WiFi Management (to enter your WiFi key)
Language
Date and time
Alarm (3 alarms available)
Bluetooth
Equalizer and FM settings
Screen brightness
Reset to factory settings
And many other options...

General menu navigation:

▲▼ = navigate up/down
◀▶ = previous/next menu
OK = confirm a selection

Question 6

How to enter the WiFi key on the DR 463+?

Accepted Answer

To enter the WiFi key on the DR 463+, first access the Configuration menu. Press the HOME button on the remote control, then navigate to Configuration using the ▲/▼ directional buttons and press OK.

Then select Network, followed by Wireless Network Configuration. The device automatically scans for available WiFi networks nearby. Use the ▲/▼ arrows to select your network from the list, then press OK to confirm.

The screen will prompt you to enter your WiFi key. Use the ▲ (up) and ▼ (down) buttons to browse the available characters: all digits (0-9), uppercase and lowercase letters (A-Z, a-z), and special characters ($ % & # _ ^ ~ ". : ; ? ! * - + @ < = > { } [ ] ( / )). When the desired character appears, press ► (right) to move to the next character.

Proceed in the same way for all characters of your password. In case of an error, use the ◄ (left) button to go back to the previous character and correct it. Once you have finished entering, press OK to validate and establish the connection to the network.

You can also use the WPS (Wi-Fi Protected Setup) mode if your router has a WPS or QSS button. Go to Configuration > Network > Wireless Network (WPS), then press the WPS/QSS button on your router within 120 seconds. The connection will be established automatically without manual entry of the key.

Question 7

How to set the language to French on the DR 463+?

Accepted Answer

On the DR 463+, the language selection is made at the first power-on of the device:

Turn on the device
The 2.4-inch color TFT screen will automatically display a request for "select your language"
Use the arrow keys to navigate to French
Press the OK button to confirm your choice

If you have already set the device to another language: access the Settings menu from the home screen to find and change the language setting. The arrow keys and the OK button allow navigation through all menus.

Question 8

How to reset the DR 463+ to factory settings?

Accepted Answer

To restore the default settings on the DR 463+, follow these steps:

Go to the Configuration menu
Select Reset
Confirm the operation
The device will automatically restart
You will need to select the language and set up the Wi-Fi connection again

After the restart, your DR 463+ will be returned to its factory state with all settings reset to their default values.

Question 9

How to enter a postal code in the position menu of the ALBRECHT DR 471 radio?

Accepted Answer

To enter a postal code in the position menu of your ALBRECHT DR 471 radio, follow these steps:

Steps to enter a postal code

Access the position menu: Use the navigation buttons to open the position menu on your device.
Input mode: Make sure the input mode is activated to allow number entry. On some models, you may need to press a specific button to toggle between navigation and input modes.
Entering the numbers: Use the navigation buttons (usually arrows or a rotary knob) to select each digit of the postal code. Press a confirmation button (often the central button or OK) to validate each digit and move to the next one.
Correction: If you make a mistake, use the back button or a dedicated key to erase the last entered digit.
Final validation: Once the complete postal code is entered, validate the entry by pressing the OK button or exiting the menu as indicated on the screen.

Additional tips

Watch the screen for indications or symbols that guide the entry.
If the entry does not work, try exiting the menu and then returning to reset the input.
Ensure that the radio is up to date if a software update is available, as this may improve navigation in the menus.

By following these tips, you should be able to enter a postal code in the position menu of your ALBRECHT DR 471 without difficulty.

Question 10

How to set the weather position on the ALBRECHT DR 471 radio?

Accepted Answer

To set the weather position on your ALBRECHT DR 471 radio, there are two main steps: first select your city, then activate the weather display.

Step 1: Select your city for the weather

Press the Information-Center button to access the information center.
Select Weather Information.
First choose your country, then your city from the 5000 available cities.
Once positioned on your city, press OK to set this city as the weather display.
You can check the weather forecasts by pressing the ◄/► buttons to see the following days.

Step 2: Configure the display in standby mode

Go to the Settings menu.
Access the Weather section.
Activate Standby Display so that the weather is displayed in standby mode.
Set the temperature unit: choose °C (Celsius) or °F (Fahrenheit).

Once this configuration is complete, the display will alternate between the time and weather information when the radio is in standby mode. If you change location, repeat the city selection in the information center. The radio automatically detects your location based on your IP address for local stations, but the weather position must be configured manually via city selection.

User manual ALBRECHT : user manuals and guides in PDF

Models ALBRECHT most viewed

Browse manuals ALBRECHT by appliance type

Recent questions about devices ALBRECHT