Q: What does it mean when the display shows 4 zeros on the Argento Mini Max?

If your CDC13-BT display shows 0000 (four zeros), it indicates a password for system configuration . This display signals that abnormal data related to speed and distance has been detected by the bicycle's system. When this code appears: The system has detected an anomaly in the instantaneous speed or distance data (TRIP/ODO) This may be due to a temporary loss of connection between the display and the motor Or to a system reset What to do: Turn off your bicycle and turn it back on after 10 seconds Check that the connection cable between the display and the motor is properly connected If the code 0000 persists, it may indicate a more serious anomaly Contact Argento customer service for appropriate assistance Note: Other specific error codes may appear (Code 3 = brake sensor anomaly, Code 4 = control unit anomaly, Code 20 = motor blockage).

Q: How do I turn on the lights on the Argento Mini Max?

The Argento Mini Max is equipped with integrated front and rear LED lights in the bike's electronic system. Activating the lights You have two methods to turn on the lights: Physical button : The rear light integrated under the saddle has a dedicated button to manually turn it on or off. Via the LCD screen (CDC13-BT) : Briefly press the ON/OFF button on the control screen to toggle the state of the front and rear lights. A lighting symbol appears on the screen to confirm activation. The lighting system is powered by the removable lithium battery (36V or 48V depending on your model), the same one that powers the Bafang 250W motor.

Question 1

What does it mean when the display shows 4 zeros on the Argento Mini Max?

Accepted Answer

If your CDC13-BT display shows 0000 (four zeros), it indicates a password for system configuration. This display signals that abnormal data related to speed and distance has been detected by the bicycle's system.

When this code appears:

The system has detected an anomaly in the instantaneous speed or distance data (TRIP/ODO)
This may be due to a temporary loss of connection between the display and the motor
Or to a system reset

What to do:

Turn off your bicycle and turn it back on after 10 seconds
Check that the connection cable between the display and the motor is properly connected
If the code 0000 persists, it may indicate a more serious anomaly
Contact Argento customer service for appropriate assistance

Note: Other specific error codes may appear (Code 3 = brake sensor anomaly, Code 4 = control unit anomaly, Code 20 = motor blockage).

Question 2

How do I turn on the lights on the Argento Mini Max?

Accepted Answer

The Argento Mini Max is equipped with integrated front and rear LED lights in the bike's electronic system.

Activating the lights

You have two methods to turn on the lights:

Physical button: The rear light integrated under the saddle has a dedicated button to manually turn it on or off.
Via the LCD screen (CDC13-BT): Briefly press the ON/OFF button on the control screen to toggle the state of the front and rear lights. A lighting symbol appears on the screen to confirm activation.

The lighting system is powered by the removable lithium battery (36V or 48V depending on your model), the same one that powers the Bafang 250W motor.

User manual Argento : user manuals and guides in PDF

Models Argento most viewed

Browse manuals Argento by appliance type

Recent questions about devices Argento