Q: How to remove the protective film from the battery compartment?

The battery compartment of the Brandson 301770 contains a plastic protective film placed between the battery and the contact. Here’s how to remove it: Locate the battery compartment on the back of the lamp Turn the compartment counterclockwise (to the left) to open it Gently remove the plastic plate that is between the battery and the internal contact Close the compartment by turning clockwise (to the right) until it is securely tightened The lamp is now ready to operate. This film is a protective element during transport and storage.

Q: In which year was the Brandson 302316 laser rangefinder designed?

The Brandson 302316 laser rangefinder was designed in 2017 , specifically on September 1, 2017 . This date comes from the serial number of the model 302316/20170901DG030 , where the sequence 20170901 indicates the design date: year 2017, month 09, day 01. Therefore, this device is over 8 years old. The rangefinder was designed and manufactured by WD Plus GmbH , based in Hanover, Germany. Despite its relatively old design year, it remains a high-performance class II laser rangefinder (635 nm, <1 mW), capable of measuring distances from 0.15 to 40 meters with an accuracy of ±1.5 mm. It offers several useful functions: area measurement, volume measurement, indirect measurement (Pythagorean theorem), addition/subtraction of values, and storage of 20 measurements.

Q: How to print pages 48 to 57 of the Brandson 302316 rangefinder manual?

To print pages 48 to 57 of the Brandson 302316 rangefinder manual, you can follow one of the two methods below: Option 1: Print directly from the online PDF viewer Locate the print button (often an icon shaped like a printer) at the top of the PDF viewer on the manual page. Click on it to open the print window. In the field for pages to print, enter 48-57 to select only those pages. Confirm to start printing. Option 2: Download and print the manual in PDF Click on the "Download the manual in PDF" button available on the page. Open the downloaded PDF file with a PDF reader (Adobe Reader, web browser, etc.). Open the print window (keyboard shortcut Ctrl+P or Cmd+P). In the field for pages to print, enter 48-57 . Confirm to start printing. The Brandson 302316 manual contains about 60 pages, so pages 48 to 57 correspond to the last important sections. This method allows you to print only the desired pages without wasting paper.

Question 1

How to remove the protective film from the battery compartment?

Accepted Answer

The battery compartment of the Brandson 301770 contains a plastic protective film placed between the battery and the contact. Here’s how to remove it:

Locate the battery compartment on the back of the lamp
Turn the compartment counterclockwise (to the left) to open it
Gently remove the plastic plate that is between the battery and the internal contact
Close the compartment by turning clockwise (to the right) until it is securely tightened

The lamp is now ready to operate. This film is a protective element during transport and storage.

Question 2

Is there a film or protection on the screen of the Brandson 301770?

Accepted Answer

No, the Brandson 301770 does not come with a protective film on its touchscreen. The screen displays the time, date, and temperature directly without any pre-applied protection.

However, during the initial unboxing, you will find a plastic insulating tab in the battery compartment on the back of the product. This tab protects the backup battery (button cell) during transport and must be removed before first use for the device to function properly.

If you see a transparent film on the screen itself, it is likely a temporary transport protection that the manufacturer has applied - you should remove it before using the lamp.

Question 3

How to safely clean the Brandson 303349 fan?

Accepted Answer

The manufacturer strongly advises against disassembling the Brandson 303349 fan. The manual states that it is prohibited to remove the protective grille, even for cleaning, as this compromises the electrical safety of the device (risk of electric shock or fire).

Cleaning without disassembly

Follow these steps to maintain your fan:

Completely unplug the device from the electrical outlet
Allow the blades to cool for a few minutes after use
Wipe the exterior and the protective grille with a cloth slightly dampened with water
Never immerse the fan in water (risk of electrocution or fire)
Allow to dry completely before plugging back in

This method is sufficient for the regular maintenance of the 303349 model. Avoid dust accumulation by cleaning every 2-3 months depending on your environment.

Question 4

Where is the CR2032 battery located in this alarm clock radio?

Accepted Answer

The CR2032 battery is located on the back of the alarm clock radio, on the bottom side, in a dedicated compartment.

This 3V backup battery (model CR2032) keeps the time and alarm settings when the device is unplugged from its main 5V microUSB power supply. It is not included in the delivery and must be purchased separately.

Upon installation, check the correct polarity of the connections (+ and -) by consulting the diagram printed in the compartment. A new CR2032 battery is available in most electronics stores, pharmacies, and supermarkets for a few euros.

Question 5

Why has the size of the projection become smaller, even though it is positioned in the same place?

Accepted Answer

The Brandson 304474 alarm clock features a time projector that displays the time on a wall or ceiling. If the size of the projection has decreased despite being in the same position, here are the most likely explanations:

Distance from the projector - Even a slight movement of the device or surface reduces the projection size. Ensure that the positioning is exactly the same as before and that no object is obstructing the projector and the surface.
Dirty lens - The projector lens may have become covered with dust or residue. Gently clean it with a soft, dry cloth to restore the projection.
Reduced brightness - The LED screen has adjustable brightness. A reduction in the brightness setting may make the projection appear smaller or less sharp. Check and increase the brightness settings using the control buttons.
Backup battery - The CR2032 backup battery may be weak. Replacing it may improve the projector's performance.

The manual does not mention a zoom function or direct adjustment of the projection size - it therefore depends solely on the distance between the device and the surface.

Question 6

In which year was the Brandson 302316 laser rangefinder designed?

Accepted Answer

The Brandson 302316 laser rangefinder was designed in 2017, specifically on September 1, 2017. This date comes from the serial number of the model 302316/20170901DG030, where the sequence 20170901 indicates the design date: year 2017, month 09, day 01. Therefore, this device is over 8 years old.

The rangefinder was designed and manufactured by WD Plus GmbH, based in Hanover, Germany. Despite its relatively old design year, it remains a high-performance class II laser rangefinder (635 nm, <1 mW), capable of measuring distances from 0.15 to 40 meters with an accuracy of ±1.5 mm. It offers several useful functions: area measurement, volume measurement, indirect measurement (Pythagorean theorem), addition/subtraction of values, and storage of 20 measurements.

Question 7

How to print pages 48 to 57 of the Brandson 302316 rangefinder manual?

Accepted Answer

To print pages 48 to 57 of the Brandson 302316 rangefinder manual, you can follow one of the two methods below:

Option 1: Print directly from the online PDF viewer

Locate the print button (often an icon shaped like a printer) at the top of the PDF viewer on the manual page.
Click on it to open the print window.
In the field for pages to print, enter 48-57 to select only those pages.
Confirm to start printing.

Option 2: Download and print the manual in PDF

Click on the "Download the manual in PDF" button available on the page.
Open the downloaded PDF file with a PDF reader (Adobe Reader, web browser, etc.).
Open the print window (keyboard shortcut Ctrl+P or Cmd+P).
In the field for pages to print, enter 48-57.
Confirm to start printing.

The Brandson 302316 manual contains about 60 pages, so pages 48 to 57 correspond to the last important sections. This method allows you to print only the desired pages without wasting paper.

User manual Brandson : user manuals and guides in PDF

Models Brandson most viewed

Browse manuals Brandson by appliance type

Recent questions about devices Brandson