Q: How do I display the ambient temperature on the SereneLife SLPAC9 air conditioner?

The ambient temperature of your room is displayed automatically on the digital LED screen of the SereneLife SLPAC9 air conditioner, located on the control panel of the indoor unit. You don't need to do anything - it appears as soon as the device is plugged in and operating, including in standby mode. Display according to the mode In cooling mode : the temperature is displayed continuously. You can adjust it between 16°C and 30°C using the Up/Down buttons. In fan or dehumidification mode : the room temperature is also displayed, but temperature adjustment is not available in these modes. Change the temperature unit If you want to switch between Celsius and Fahrenheit , use the dedicated °C/°F button on the control panel or your remote control.

Q: Does the SereneLife SLPAC12 have a WiFi app or smartphone remote control?

No, the SereneLife SLPAC12 does not have a WiFi app or smart connectivity . This air conditioner operates only in direct control mode. Available control modes: Digital remote control: Included with the air conditioner, operating with 2 AAA batteries to control the unit remotely via infrared. Manual controls: Integrated digital touch panel directly on the air conditioner for local control. The SLPAC12 model is designed for traditional control and does not offer home automation or management via a smartphone app. If you are looking for a portable air conditioner with WiFi connectivity and a mobile app, you will need to explore other brands or models that offer this feature.

Question 1

How to connect multiple phones to this air conditioner?

Accepted Answer

The SereneLife SLACHT12W allows you to control the device from multiple smartphones via the Smart Life app. Here’s how to connect two or more phones:

Download the Smart Life app on each smartphone from the App Store or Google Play
Connect the phones to the same 2.4 GHz WiFi network as the air conditioner
Create a Smart Family account (or use an existing account) - this allows multiple devices to share control of the air conditioner
Log in with the same credentials on each phone using the same Smart Life account

Once this setup is complete, all phones connected to the same account will have access to control the device remotely and monitor its operation.

Question 2

The cooling is not working, only the fan is running

Accepted Answer

If your SereneLife SLPAC9 is not cooling and is only operating in fan mode, here are the checks to perform immediately:

1. Check that the Cooling mode is active

Press the Mode button on the remote control or control panel several times until the Cooling mode indicator lights up. The device has three modes: Cooling, Fan (fan only), and Dehumidification. An accidental press on Mode may have switched the device to Fan mode.

2. Check the set temperature

Use the up/down arrows to set a temperature between 16 and 30°C. Ensure that the programmed temperature is lower than the ambient temperature of your room. If you set 28°C while it is already 26°C, the system will not cool further.

3. Clean the air filter

A dirty filter restricts airflow and drastically reduces cooling performance. Refer to the manual to locate the filter (usually at the back or side) and clean it regularly. A very dirty filter can give the impression that only the fan is working.

4. Check the exhaust hose

The SLPAC9 has an exhaust hose leading outside (usually a window). Ensure that this hose is not bent, crushed, or blocked. A blocked exhaust prevents the system from cooling effectively.

5. Check the area to be cooled

Your air conditioner has a capacity of 9,000 BTU/h and covers up to 27.9 m² (300 sq ft). If your room is much larger, the device may seem to "not cool" simply because its power is insufficient for that area.

6. Reset the device

Turn off the device, unplug it from the outlet for 2-3 minutes, then plug it back in and turn it on. A reset may correct a software malfunction.

If after these checks the cooling still does not work, there may be an internal fault (compressor, refrigeration circuit) requiring support intervention or replacement.

Question 3

How do I display the ambient temperature on the SereneLife SLPAC9 air conditioner?

Accepted Answer

The ambient temperature of your room is displayed automatically on the digital LED screen of the SereneLife SLPAC9 air conditioner, located on the control panel of the indoor unit. You don't need to do anything - it appears as soon as the device is plugged in and operating, including in standby mode.

Display according to the mode

In cooling mode: the temperature is displayed continuously. You can adjust it between 16°C and 30°C using the Up/Down buttons.
In fan or dehumidification mode: the room temperature is also displayed, but temperature adjustment is not available in these modes.

Change the temperature unit

If you want to switch between Celsius and Fahrenheit, use the dedicated °C/°F button on the control panel or your remote control.

Question 4

Does the SereneLife SLPAC12 have a WiFi app or smartphone remote control?

Accepted Answer

No, the SereneLife SLPAC12 does not have a WiFi app or smart connectivity. This air conditioner operates only in direct control mode.

Available control modes:

Digital remote control: Included with the air conditioner, operating with 2 AAA batteries to control the unit remotely via infrared.
Manual controls: Integrated digital touch panel directly on the air conditioner for local control.

The SLPAC12 model is designed for traditional control and does not offer home automation or management via a smartphone app. If you are looking for a portable air conditioner with WiFi connectivity and a mobile app, you will need to explore other brands or models that offer this feature.

Question 5

Why is my SereneLife SLPAC9 air conditioner not blowing cold air?

Accepted Answer

If your SereneLife SLPAC9 air conditioner is not producing cold air, here are the checks to perform in order:

1. Check that the cooling mode is activated

Press the Mode button several times until the cooling indicator lights up. The unit has three modes: cooling, fan, and dehumidification. If it is in fan mode, only ambient air circulates.

2. Check the temperature setting

Make sure the target temperature is lower than the current room temperature. The unit operates between 16-30°C. If the setting is higher than the room temperature, the air conditioner will not activate cooling.

3. Clean the air filter

This is the most common cause. Vacuum the filter once every two weeks. A dirty filter drastically reduces cooling performance. In case of significant dirt, wash it with warm water (40°C) and a mild detergent.

4. Check the exhaust duct

Inspect the drainage tube to ensure it is not bent, crushed, or blocked. The maximum allowed length is 1.5 meters, and the hose must remain horizontal during installation.

5. Check the area to be cooled

The SLPAC9 is designed to cool rooms up to 27.9 m² with a capacity of 9,000 BTU/h. If your room is larger, the unit will not be able to cool sufficiently.

6. Restart the unit

Turn off the unit, unplug it for 2-3 minutes, then restart it.

Start by cleaning the filter, which resolves the issue in most cases. If none of these steps work, professional intervention is recommended.

Question 6

Where is the filter of the SereneLife SLPAC9 air conditioner and how can I access it?

Accepted Answer

The filter of the SereneLife SLPAC9 air conditioner is located at the front of the unit, behind the air intake grille on the front panel.

How to access the filter:

Locate the air intake grille on the front panel of the unit
Remove this grille by gently pulling it
Free the filter from both sides following the direction indicated by the arrows on the filter itself

Regular filter maintenance:

Vacuum the filter every two weeks to remove dust
If the filter is heavily soiled, wash it with warm water (about 40°C) using a mild detergent
Allow it to dry completely in the shade before reinstalling

Detailed visual diagrams can be found in the Maintenance section of your manual to assist with this operation.

Question 7

How to change the temperature units from Celsius to Fahrenheit without a remote control on the SLPAC180W?

Accepted Answer

The manual for the SLPAC180W indicates that this device supports both Celsius (°C) and Fahrenheit (°F). However, the provided PDF does not specify the exact procedure to switch between the two units without a remote control.

Here’s what you can try:

Locate the MODE button on the front control panel of your air conditioner
Press and hold this button for 3 to 5 seconds (or press it multiple times quickly depending on the model)
The display should toggle between °C and °F

If this method does not work, look for a small recessed button on the panel or one specifically labeled for units. Feel free to check the "Setup" or "Settings" section of your paper manual for more details on your exact model.

Question 8

The air conditioner does not cool after reactivation following a winter pause

Accepted Answer

After a winter pause, it is normal for the SereneLife SLPAC905W air conditioner not to cool immediately. Here are the key points to check:

1. Wait 24 hours before use

If you turned the unit back on yesterday, you must wait at least 24 hours after starting it before it can cool effectively. This protects the compressor.

2. Check the compressor restart

If you have recently turned off the unit, wait at least 3 minutes before restarting it. Restarting the compressor too quickly can prevent cooling.

3. Check the operating mode

Make sure you have selected the Cooling mode and not the fan or dehumidification mode. Check via the "Smart Life" app or the control buttons on the unit.

4. Check the filter

The removable and washable filter should be cleaned regularly (every 2 weeks). A clogged filter can reduce performance. Rinse it with warm water (maximum 40°C) using a mild detergent.

5. Check the power source and overheating

The unit operates on 220V/50Hz. Check that the power supply is correct and that the device does not display an error message on its screen.

If after these checks the cooling does not return to normal, try completely restarting the device (turn off and then wait at least 3 minutes before restarting) or test the WiFi connectivity via the Smart Life app.

User manual SereneLife : user manuals and guides in PDF

Models SereneLife most viewed

Browse manuals SereneLife by appliance type

Recent questions about devices SereneLife