CAS PB-500 - Balance

PB-500 - Balance CAS - Notice d'utilisation et mode d'emploi gratuit

Retrouvez gratuitement la notice de l'appareil PB-500 CAS au format PDF.

📄 34 pages Français FR ⬇ Télécharger 💬 Question IA ❓ 8 questions ⚙️ Specs
Notice CAS PB-500 - page 1
1 / 34
Choisissez votre langue et indiquez votre email : nous vous enverrons une version traduite specifiquement.
Caractéristiques Détails
Type de produit Balance
Capacité maximale 500 kg
Précision 0,1 kg
Dimensions de la plateforme 60 x 60 cm
Affichage Écran LCD rétroéclairé
Alimentation Alimentation secteur et batterie rechargeable
Utilisation Idéale pour peser des objets lourds dans des environnements industriels
Maintenance Nettoyage régulier de la surface, vérification périodique de la calibration
Sécurité Conforme aux normes de sécurité électrique
Garantie 2 ans
Accessoires inclus Câble d'alimentation, manuel d'utilisation

FOIRE AUX QUESTIONS - PB-500 CAS

Comment calibrer la balance CAS PB-500 ?
Pour calibrer la balance, placez un poids étalon connu sur la plate-forme de pesée, puis accédez au menu de réglage dans les paramètres de la balance. Suivez les instructions à l'écran pour effectuer la calibration.
Que faire si la balance affiche un poids instable ?
Assurez-vous que la balance est placée sur une surface plane et stable. Vérifiez également que rien n'interfère avec la plate-forme de pesée. Si le problème persiste, essayez de recalibrer la balance.
Comment changer les unités de mesure sur la balance ?
Pour changer les unités de mesure, appuyez sur le bouton 'Unités' sur le panneau de contrôle jusqu'à ce que l'unité désirée apparaisse à l'écran. Les unités disponibles incluent grammes, kilogrammes et livres.
La balance ne s'allume pas, que faire ?
Vérifiez que la balance est correctement alimentée. Assurez-vous que le câble d'alimentation est bien branché ou que les piles sont chargées. Si la balance ne s'allume toujours pas, envisagez de contacter le service client.
Comment nettoyer la balance CAS PB-500 ?
Utilisez un chiffon doux et humide pour nettoyer la surface de la balance. Évitez les produits chimiques agressifs ou abrasifs qui pourraient endommager l'appareil.
La balance affiche un message d'erreur, que signifie-t-il ?
Les messages d'erreur peuvent indiquer divers problèmes. Consultez le manuel d'utilisation pour identifier le code d'erreur spécifique et obtenir des instructions sur la façon de le résoudre.
Quelle est la capacité maximale de la balance CAS PB-500 ?
La capacité maximale de la balance CAS PB-500 est de 500 kg.
Est-ce que la balance CAS PB-500 fonctionne avec des batteries ?
Oui, la balance CAS PB-500 peut fonctionner avec des piles, mais elle peut également être alimentée par un adaptateur secteur. Assurez-vous d'avoir des piles neuves si vous utilisez cette fonction.

Questions des utilisateurs sur PB-500 CAS

0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.

Poser une nouvelle question sur cet appareil

L'email reste privé : il sert seulement à vous prévenir si quelqu'un répond à votre question.

Aucune question pour l'instant. Soyez le premier à en poser une.

Téléchargez la notice de votre Balance au format PDF gratuitement ! Retrouvez votre notice PB-500 - CAS et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil PB-500 de la marque CAS.

MODE D'EMPLOI PB-500 CAS

CL7200 Series

Parameter Manual

(English)

Rev. 2019. 03. 01

V 3.02.7 (D)-4503

CAS PB-500 - CL7200 Series - 1

Parameter

8600CALModePARAMETER SETTING Function Code: [501] Ride Second Position (1/1)

The Parameter Setting Menu allows you to input Function Codes to change the CL7200's predefined settings. These settings determine how the scale operates and should only be changed if you are certain about the effect they will have on scale operations. In some cases these settings should not be changed without first checking with the local government agency.

There are two levels of Parameter Settings, Factory and Dealer. The Factory Settings are numbered 800 - 899 and can only be accessed through the Calibration Mode. The Dealer Settings are numbered 500 - 799 and can be accessed either through the Calibration Mode or by pressing the ZERO key while in the main Programming Menu and entering the System Password.

1 Factory Setting (Parameters 800\~999)

1. Parameter 801 \~ 809 are UNDEFINED PARAMETERS

  1. Parameter 810
MESSAGEVALUECONTENTREMARKDEFAULT
Price Decimal Point0-10Define price position of decimal point2
  1. Parameter 832
MESSAGEVALUECONTENTREMARKDEFAULT
Use Serial OutY/NTransmit initial start by serial port.Yes= USENo= NO USEN
  1. Parameter 833
MESSAGEVALUECONTENTREMARKDEFAULT
Use last using timeY/NDisplay last usage time.Yes = USENo = NO USEN
  1. Parameter 834
MESSAGEVALUECONTENTREMARKDEFAULT
Use Clerk passwordY/NDuring Initial start use Clerk passwordYes = USENo = NO USEN
  1. Parameter 835
MESSAGEVALUECONTENTREMARKDEFAULT
Select Oper ModeY/NN

9. Parameter 836 \~ 860 are UNDEFINED PARAMETERS

  1. Parameter 861
MESSAGEVALUECONTENTREMARKDEFAULT
Prepack Print threshold(d)10-30,000Auto-detect weight difference in range20
  1. Parameter 862
MESSAGEVALUECONTENTREMARKDEFAULT
MIN Weight for sale(d)10~999Set minimum range of sales weight20
  1. Parameter 863
MESSAGEVALUECONTENTREMARKDEFAULT
Display Dummy Digit(Weight)Y/NN

13. Parameter 864 is an UNDEFINED PARAMETER

CAS PB-500 - Parameter 864 is an UNDEFINED PARAMETER - 1

natural_image Empty rectangular frame with no text, symbols, or markings
  1. Parameter 865
MESSAGEVALUECONTENTREMARKDEFAULT
Triangle Type0~21
  1. Parameter 866
MESSAGEVALUECONTENTREMARKDEFAULT
Decimal SignCHARSet decimal point on weightUSE "CHAR" to inputASCII

16. Parameter 867 \~ 884 are UNDEFINED PARAMETERS

  1. Parameter 885
MESSAGEVALUECONTENTREMARKDEFAULT
[00] Key Format1~4Set "00_" key input format*(1 means 1*10n)1 = 102 = 1003 = 10004 = 100002
  1. Parameter 886
MESSAGEVALUECONTENTREMARKDEFAULT
ErrorMsg Clear Timeout0~99Set Error message display timeDisplay time = Input# X 0.1 sec30

22. Parameter 900

MESSAGE VALUE CONTENT REMARK DEFAULT

Ethernet (TCP/IP) Y/N Ethernet usage Yes = USE

No = NO USE

Y

23. Parameter 901 \~ 919 are UNDEFINED PARAMETERS

24. Parameter 920\~921

MESSAGE VALUE CONTENT REMARK DEFAULT

920 -> Sign AMCHARSet AM correspond nameAble to CHAR keyAM
921 -> Sign PMCHARSet PM correspond nameAble to CHAR keyPM

25. Parameter 922 \~ 933

MESSAGE VALUE CONTENT REMARK DEFAULT

922 -> Month 1JAN
923 -> Month 2FEB
924 -> Month 3MAR
925 -> Month 4APR
926 -> Month 5MAY
927 -> Month 6CHARSet correspond month nameAble to CHAR keyJUN
928 -> Month 7JUL
929 -> Month 8AUG
930 -> Month 9SEP
931 -> Month 10OCT
932 -> Month 11NOV
933 -> Month 12DEC

26. Parameter 934 \~ 940

MESSAGE VALUE CONTENT REMARK DEFAULT

934 -> Week 1SUN
935 -> Week 2MON
936 -> Week 3TUE
937 -> Week 4CHARSet correspond DAY of Week nameAble to CHAR keyWED
938 -> Week 5THU
939 -> Week 6FRI
940 -> Week 7SAT

27. Parameter 941 \~ 979 are UNDEFINED PARAMETERS

  1. Parameter 960
MESSAGEVALUECONTENTREMARK
Use Korean for USAY/NUse Korean LanguageN

29. Parameter 981 \~ 993 are UNDEFINED PARAMETERS

  1. Parameter 994
MESSAGEVALUECONTENTREMARKDEFAULT
Allow FWUPDATE0/1F/W Update Condition0 = No Check CAL1 = Check CAL1

31. Parameter 995 is an UNDEFINED PARAMETER

  1. Parameter 998
MESSAGEVALUECONTENTREMARKDEFAULT
Allow FWUPDATE0/1F/W Update Condition0 = No Check CAL1 = Check CAL1

33. Parameter 997 - 998 are UNDEFINED PARAMETERS

  1. Parameter 999

2 Dealer Setting (Parameters 500\~799)

  1. Parameter 501
MESSAGEVALU ECONTENTREMARKDEFAULT
Ride Second PositionY/NIf FOR key is not exist on key padYou can set initial reference(R1,R2,R3) (Count, PCS, Price)KOREA USEN
  1. Parameter 502
MESSAGEVALUECONTENTREMARKDEFAULT
System PasswordCharInput System PasswordNOTE: Use 4byte memoryCan NotChange000419

3. Parameters 503 \~ 509 are UNDEFINED

  1. Parameter 510
MESSAGEVALUECONTENTREMARKDEFAULT
Calibration Noti-Msg:CharCalibration Message (Korea)CONTACT SERVICE

5. Parameters 511 \~ 528 are UNDEFINED

  1. Parameter 529

8. Parameter 531

MESSAGE VALUE CONTENT REMARK DEFAULT

Time Format Numeric Set current time formatHH : Hour
0 : HH:MM (24hours)MM : Minute
1 : HH:MM AM (12hours)SS : Second 0
2 : HH:MM:SS (24hours)
3 : HH:MM:SS AM (12hours)

9. Parameter 532

MESSAGE VALUE CONTENT REMARK DEFAULT

Sell by date Format Numeric 0: Calculate expire date with current

date and input date

1: Input all date information (yy/mm/dd) 0

(Input date less then 4 digit, scale will

recognize as month and date (mm/dd))

10. Parameter 533

MESSAGE VALUE CONTENT REMARK DEFAULT

Use 1kg,100g KeyY/NUse 1kg, 100g Key. This parameter is valid only in kg modeN

11. Parameter 534

MESSAGE VALUE CONTENT REMARK DEFAULT

Default Unit Weight(1kg,100g)NumericSet default unit of PLU. Allweight/price calculate according tofollowing:1 : 1kg2 : 100g1

12. Parameter 535

MESSAGE VALUE CONTENT REMARK DEFAULT

Display MessageNumericSet display time for Error, Warning message.12

13. Parameter 536

MESSAGE VALUE CONTENT REMARK DEFAULT

Use kg/lb key Y/N Use kg/lb key N

14. Parameter 537

MESSAGE VALUE CONTENT REMARK DEFAULT

Use kg/lb Auto

Y/N Use kg/lb Auto Conversion

Conversion

N

15. Parameter 538

MESSAGE VALUE CONTENT REMARK DEFAULT

Use 1/2lb, 1/4lb Key Y/N Use 1/2lb, 1/4lb Key. This parameter

is valid only in lb mode

N

16. Parameter 539

MESSAGEVALUECONTENTREMARKDEFAULT
Total Price BarcodeTypeY/NN

17. Parameter 540

MESSAGE VALUE CONTENT REMARK DEFAULT

Barcode Price CutNumericSet barcode last digit (price) to be droppedWhen input = 1$12.34 -> 1230

18. Parameter 541

MESSAGE VALUE CONTENT REMARK DEFAULT

Barcode Weight CutNumericSet barcode last digit(weight) to beWhen input = 1
0 ~ 3dropped1.234kg -> 123

19. Parameter 542

MESSAGE VALUE CONTENT REMARK DEFAULT

Barcode Item CodeY/NSet barcode last digit (Item Code)When input = Y
Cut Overto drop 1 digit12345 -> 1234

20. Parameter 543

MESSAGE VALUE CONTENT REMARK DEFAULT

Weight Barcode Print SettingNumeric 0~30: Weight Barcode to Weight print 1: IF PLUtype == Count then Weight Barcode to quantity print 2 :IF Fixed sale(or (-)sale) then Weight Barcode to “1”print 3: USE both 1 and 2ONLY KOREA : 3 0

21. Parameter 544

MESSAGE VALUE CONTENT REMARK DEFAULT

Print Weight Cut Y/N0

22. Parameter 545

MESSAGEVALUE CONTENTREMARK DEFAULT
Display Error Message biggerY/N

23. Parameter 546

MESSAGE VALUECONTENT REMARK DEFAULT
Use Frequent ShopperY/N
ProgramY

24. Parameter 547

MESSAGEVALUECONTENTREMARKDEFAULT
Time Print Format (0~2)Numeric(0~2)0: 13:001: Single Letter (12AM =A, 1AM =B)2: Hour Only0

CAS PB-500 - Parameter 547 - 1

natural_image Empty rectangular frame with no text, symbols, or markings
  1. Parameter 548
MESSAGEVALUECONTENTREMARKDEFAULT
Use 2 Column for Serving DateNumericMust be 9 to use true type fonts for Nutrition9
  1. Parameter 549
MESSAGEVALUECONTENTREMARKDEFAULT
Display Weight CutNumeric0
  1. Parameter 550
MESSAGEVALUECONTENTREMARKDEFAULT
Out of paper thresholdNumericSet roll paper sensor sensitivity. If sensor doesn't recognize roll paper, setting value should be lowered200
  1. Parameter 551
MESSAGEVALUECONTENTREMARKDEFAULT
Use double print (auto)Y/NSet "Y" to double print (scale will print same label twice but counts as one transaction)You must press print key to function0

CAS PB-500 - Parameter 547 - 2

natural_image Empty rectangular frame with no text, symbols, or markings
  1. Parameter 554
MESSAGEVALUECONTENTREMARKDEFAULT
Prevent Sale of Same WeightY/NN
  1. Parameter 555
MESSAGEVALUECONTENTREMARKDEFAULT
Packed Time (dep.Sell by time)Y/NPrint packed time, according to existing sell by timeN
  1. Parameter 556
MESSAGEVALUECONTENTREMARKDEFAULT
Use PS2 port for ScannerY/NN
  1. Parameter 557
MESSAGEVALUEREMARKDEFAULT
Scanner Working ModeNumeric(0-7)0 = Scanning Calls PLU1 = Weight from Weighing, Calculate Price then Issue Label2 = Weight from Barcode, Calculate Price then Issue Label.0
  1. Parameter 558
MESSAGEVALUECONTENTREMARKDEFAULT
Source: MercedesVAN

38. Parameter 561 is NO CAPTION

  1. Parameter 562
MESSAGEVALUECONTENTREMARKDEFAULT
Cashdraw close timeNumericSet duration of cashdrawer opening and closing1 = 0.1ms1
  1. Parameter 563
MESSAGEVALUECONTENTREMARKDEFAULT
Allow Reverse Feed:Y/NUse reverse feed function, when using continuous label modeY

41. Parameter 564 is an UNDEFINED PARAMETER

  1. Parameter 565
MESSAGEVALUECONTENTREMARKDEFAULT
Print Training MsgY/NPrint Training Message on labelY
  1. Parameter 568
MESSAGEVALUECONTENTREMARKDEFAULT
Check Connection of Master R - IY/NN
  1. Parameter 570
MESSAGEVALUECONTENTREMARKDEFAULT
Non Weight sale (WT.on Tray)Y/NAllow transaction for pcs/PLU while weight on the tray. (the weight doesn't affect price)N
  1. Parameter 571
MESSAGEVALUECONTENTREMARKDEFAULT
Print Weight (by count sale)Y/NAllow to print weight while PLU is By count type (Weight value doesn't effect on price)*Weight is only for referenceY
  1. Parameter 572
MESSAGEVALUECONTENTREMARKDEFAULT
Apply U.Price for T.D/CY/NAllow to display discounted unit-price for total priceN
  1. Parameter 573
MESSAGEVALUECONTENTREMARKDEFAULT
Allow Unit Price ChangeY/NAllow changing unit priceN

53. Parameter 576

MESSAGE VALUE CONTENT REMARK DEFAULT

Fixed Price Hide Y/N Fixed Price Hide N

54. Parameter 577

MESSAGE VALUE CONTENT REMARK DEFAULT

Common Barcode Y/N Use Common Barcode N

55. Parameter 578

MESSAGE VALUE CONTENT REMARK DEFAULT

Common Label Y/N Use Common Label N

56. Parameter 579

MESSAGE VALUE

CONTENT REMARK DEFAULT

Use Temp Key [TYPE]

Y/N

Use Temp Key [TYPE]

N

57. Parameter 580 is an UNDEFINED PARAMETER

58. Parameter 581

MESSAGE VALUE

CONTENT REMARK

DEFAULT

Print only WT.(u.p.zero)

Y/N

Allow to print with weight value even if Unit price is 0 (Use for only product weight transaction, not on price)

N

59. Parameter 582

MESSAGE VALUE

CONTENT REMARK

DEFAULT

Use X key (by WT.)

Y/N

Allow to use X key on by weight type (For By-count and pcs X key is allowed)

N

  1. Parameter 583
MESSAGEVALUECONTENTREMARKDEFAULT
Allow continuous saleY/NAllow to use add-up transactionAdd-up the product continually(after transaction scale will set zero)N
  1. Parameter 584
MESSAGEVALUECONTENTREMARKDEFAULT
Use TARE Table No;Y/NSet input method Tare ID or direct input. If you set Y, must set tare weight before saleN
  1. Parameter 585
MESSAGEVALUECONTENTREMARKDEFAULT
Use U.Price for key discountY/NSet discount key for (-,%) individual item or total priceY

Parameter 586

MESSAGEVALUECONTENTREMARKDEFAULT
Indirect PLU Call(0.1s)NumericSet duration time for Indirect PLU call-up. NOTE: Input 0 will not call-up any PLU In this case you must press PLU button to call-up a1 = 0.1s10 = 1sec0
  1. Parameter 588
MESSAGEVALUECONTENTREMARKDEFAULT
Save Overriden u.p. zero PLUY/NIf para 587 set as 0, save the unit price to PLU. Next time PLU is called up PLU has saved unit price.N
  1. Parameter 589
MESSAGEVALUECONTENTREMARKDEFAULT
Apply Price Round0-40: No use1: For each PLU2: Addup Round (ticket only)3: Addup Round (label and ticket)4: Cutting0
  1. Parameter 590
MESSAGEVALUECONTENTREMARKDEFAULT
Round TypeY/NN : Round down, Total PriceY : Round off, Total PriceDefault value : Set value in parameter 591Y
  1. Parameter 591
MESSAGEVALUECONTENTREMARKDEFAULT
Price Round UnitNumericSet round value of last digit of total price (set value: 0, 5, 10, 100, 1000 etc)This value set correspond with para 590 (Round off/down)Set value=100 para 590 set as 1 ex 1)Total Price=12345Set value appliedTotal Price=12300 ex 2)Total Price=12355Set value appliedTotal Price=124000
  1. Parameter 592
MESSAGEVALUECONTENTREMARKDEFAULT
Weight Round UnitY/NCurrently not usedWeight round off/down in 10 unitCalculate and print at same time0
  1. Parameter 593
MESSAGEVALUECONTENTREMARKDEFAULT
Use By Pcs PLUY/NSet by pcs PLUY for count/quantityN for simple count functionY
  1. Parameter 594
MESSAGEVALUECONTENTREMARKDEFAULT
Print under Min. WeightY/NAllow to print under minimum weightN
  1. Parameter 595
MESSAGEVALUECONTENTREMARKDEFAULT
Individual Reset(Z Report)Y/NY : Set to erase each report on Z report. NOTE: May cause effect on other reportsN: Set to erase all the report at once Except X1/X2 is separate itemX Report : only call-up record and print ZReport : allow to call-up and erase record for final-reportN
  1. Parameter 596
MESSAGEVALUECONTENTREMARKDEFAULT
X/Z ReportY/NSet to make a reportNOTE: N makes no transactiontherefore return key does not functionY

CAS PB-500 - Parameter 582 - 1

natural_image Empty rectangular frame with no text, symbols, or markings
  1. Parameter 597
MESSAGEVALUECONTENTREMARKDEFAULT
Prepack ReportY/NSet to make a report on Prepack modeSet para 596 as N. This set will not make reportY
  1. Parameter 598
MESSAGEVALUECONTENTREMARKDEFAULT
Print when Z report clearY/NSet to print on Z report clearSet as NX report only printsZ report erase onlyY

75. Parameter 599 is an UNDEFINED PARAMETER

  1. Parameter 600
MESSAGEVALUECONTENTREMARKDEFAULT
Auto clear key tareY/NSet undo key-tare value after sale (when PLU is clear)Y
  1. Parameter 601
MESSAGEVALUECONTENTREMARKDEFAULT

79. Parameter 603

MESSAGE VALUE CONTENT REMARK DEFAULT

Apply PLU TareY/N Set to change weight tare value after
Preferentiallycall-up the PLU(Must greater then call-up PLU tare)N

80. Parameter 604

MESSAGE VALUE CONTENT REMARK DEFAULT

Keep key tare (PLU tare)Y/N Allow to over-ride last called-up PLU value. Last key tare value is over-ride by PLU key tare. After transaction PLU tare is clear and manually entered tare value remainsY= PLU preset tare overrides manual tare.N= Doesn’t allow PLU with preset tare to be recalled.N

81. Parameter 605

MESSAGE VALUE CONTENT REMARK DEFAULT

Accumulation tare Y/N Set to use accumulation tare
NOTE: tare value has to be greater than last oneN

82. Parameter 606

MESSAGE VALUE CONTENT REMARK DEFAULT

Subtraction tareY/N Set to use subtraction tareOnly set tare value less than last tarevalueN
  1. Parameter 607
MESSAGE VALUE CONTENT REMARK DEFAULT
Tare Input Type 0~4 Check input tare When invalid value0: Error1: No Round2: Round Off3: Round Down4: Round Up0
  1. Parameter 608
MESSAGE VALUECONTENTREMARK DEFAULT
Tare after PLU call Y/NSet tare value after PLU is selected Y
  1. Parameter 609
MESSAGE VALUECONTENTREMARK DEFAULT
Display tare only weight typeY/N Setto display main tare only PLU is weight typeApply on EU display modeN
  1. Parameter 610
MESSAGE VALUECONTENTREMARK DEFAULT
Ignore Wt. at Fixed ItemY/NIgnore weight when called fixed ItemY
  1. Parameter 611
MESSAGE VALUECONTENTREMARK DEFAULT
Display weight tare on PTY/NDisplay weight tare on PTY
  1. Parameter 612
MESSAGEVALUECONTENTREMARKDEFAULT
Use Neg . Weight LimitY/NN
  1. Parameter 613

MESSAGE VALUE CONTENT REMARK DEFAULT

Transaction Msg Size Y/N N

  1. Parameter 614

MESSAGE VALUE CONTENT REMARK DEFAULT

Clerk Lock Key Method Numeric 0

  1. Parameter 615

MESSAGE VALUE CONTENT REMARK DEFAULT

Use By Count PLU Y/N Y

  1. Parameter 616

MESSAGE VALUE CONTENT REMARK DEFAULT

Hold Time Numeric x 0.1 sec 0

  1. Parameter 617

MESSAGE VALUE CONTENT REMARK DEFAULT

Clerk Subtotal List Y/N N

  1. Parameter 618

MESSAGE VALUE CONTENT REMARK DEFAULT

Unlimited Fixed Weight Y/N N

  1. Parameter 619

MESSAGE VALUE CONTENT REMARK DEFAULT

Use RS-232 for Real Y/N

Time Transactions

  1. Parameter 620

MESSAGE VALUE CONTENT REMARK DEFAULT

Send Real Time Y/N

Transactions

  1. Parameter 621
MESSAGEVALUECONTENTREMARKDEFAULT
Use NMI DiscountY/NTitle now says "Discount Type"N
  1. Parameter 622
MESSAGEVALUECONTENTREMARKDEFAULT
Send Weight Value <1Numeric1 = x102 = x1000
  1. Parameter 623
MESSAGEVALUECONTENTREMARKDEFAULT
Use PS2 Keyboard for CL-5000 "S" typeY/NN

100. Parameter 624 is an UNDEFINED PARAMETER

  1. Parameter 625
MESSAGEVALUECONTENTREMARKDEFAULT
EXT NVRAM TypeY/N0
  1. Parameter 626
MESSAGEVALUECONTENTREMARKDEFAULT
Display Primary signStringSet money sign for display$

103. Parameter 627 is an UNDEFINED PARAMETER

  1. Parameter 628
MESSAGEVALUECONTENTREMARKDEFAULT
Weight LB Symbol 1StringSet use weight unit/symbol for lb (CAUTION: do not change)CAUTION: DONOT CHANGElb
  1. Parameter 629
MESSAGEVALUECONTENTREMARKDEFAULT
Weight LB Symbol 2StringSet use sub weight unit/symbol for lb (do not change)CAUTION: DONOT CHANGEoz
  1. Parameter 630
MESSAGEVALUECONTENTREMARKDEFAULT
Weight symbol 1stringSet use weight unit/symbol(CAUTION: do not change)CAUTION: DONOT CHANGEkg
  1. Parameter 631
MESSAGEVALUECONTENTREMARKDEFAULT
Weight symbol 2StringSet use sub weight unit'symbol(do not change)CAUTION: DONOT CHANGEg
  1. Parameter 632
MESSAGEVALUECONTENTREMARKDEFAULT
Primary signStringSet primary money sign$
  1. Parameter 633
MESSAGEVALUECONTENTREMARKDEFAULT
Last signStringSet smaller money signShould be ?
  1. Parameter 634
MESSAGEVALUECONTENTREMARKDEFAULT
Time separator signChar.Set separator for time/min/sec*:*
  1. Parameter 635
MESSAGEVALUECONTENTREMARKDEFAULT
Date separator signChar.Set separator for year/month/date* - *
  1. Parameter 636
MESSAGEVALUECONTENTREMARKDEFAULT
Price output formatNumericSet to print money currency (display/ticket, not on label)0 : “100.00” type1 : “100.00” type2 : “100.00” type3 : “100.00 c” type4 : “100.00c(Greek)” typeFor type 3 useage Parameter 633 (last sign) must set before this setting1
  1. Parameter 637
MESSAGEVALUECONTENTREMARKDEFAULT
Price output format (LABEL)NumericSet to print money currency on label (Label print only for total price)0 : “100.00” type1 : “100.00” type2 : “100.00” type3 : “100.00c” type4 : “100.00c(Greek)” type* default : 0For 3.4 type usageParameter 633 last sign must set beforeFor 4 type only display money is below decimal point (EX:“56c”)1
  1. Parameter 638
MESSAGEVALUECONTENTREMARKDEFAULT
Set Dual CurrencyNumeric0: No use1 : UseUse currency table 1 as dual currency(Use when 2 types of currency is used)Changed from "N"0
  1. Parameter 639
MESSAGEVALUECONTENTREMARKDEFAULT
Print [REPACK] on RepackY/NPrint [REPACK] on Repack FieldY
  1. Parameter 640 \~ 677 are LABEL CAPTION FIELDS
MESSAGEVALUECONTENTREMARKDEFAULT
640 > Total PriceStringTOTAL PRICE %C
641 > By Weight PricePRICE %C/%U
642 > Non Weight PricePRICE %C
643 > By Count PricePRICE %C/pcs
644 > WeightWT %W
645 > QuantityQUANTITY
646 > TareTARE %W
647 > Saved PriceYOU SAVE
648 > Regular PriceREG PRICE
649 > Tax PriceTAX %C
650 > Packed On DatePACKED ON
651 > Sell By DateSELL BY
652 > Cook By DateCOOK BY
653 > Produced DatePRODUCED
654 > Packed On TimePACKED ON
655 > Sell By TimeSELL BY
656 > Payment PriceRECEIVE %C
657 > Change PriceCHANGE %C
658 > Refer. Net WeightNET WT %W
659 > Refer Gross WeightGROSS WT %W
660 > Manual WeightMAN WT %W
MESSAGE VALUECONTENT REMARK DEFAULT
672 > Void Count (Total)VOID COUNT
673 > Void Price (Total)VOID PRICETOTAL WT %WTOTAL QTY
674 > Total Weight (Total)
675 > Total Quantity (Total)
676 > Ingredient INGREDIENT
677 > PLU No.PLU #:
678 > OriginORIGIN :
  1. Parameter 679
MESSAGEVALUECONTENTREMARKDEFAULT
Auto Clear Price:Y/NY

  1. Parameter 680 \~ 689 are UNDEFINED PARAMETERS (680 is No Caption)

  2. Parameter 690

MESSAGE VALUE CONTENTREMARK DEFAULT
Prt Under Min Weight on PrepackY/NN

  1. Parameter 691 \~ 699 are UNDEFINED PARAMETERS

  2. Parameter 700

MESSAGEVALUECONTENTREMARKDEFAULT
Total Displaying Time (sec)Numeric????1
  1. Parameter 701
MESSAGEVALUECONTENTREMARKDEFAULT
Prt Tax(Report)Y/NSet to print Tax report on scale or clerk reportY
  1. Parameter 702
MESSAGEVALUECONTENT REMARKDEFAULT
Prt Pay(Report)Y/NSet to print Pay report on scale or clerkY

124. Parameter 703

MESSAGE VALUECONTENT REMARKDEFAULT
Prt Round Summary(Report)Y/N Set to print Round report on scale or clerkN

125. Parameter 704

MESSAGE VALUECONTENT REMARK DEFAULT
Prt Store NameY/N Set to print store name on report
(Report):

126. Parameter 705 \~ 707 are NO CAPTION

127. Parameter 708

MESSAGE VALUE CONTENT REMARK DEFAULT

Clerk Key Action in Label Mode??????0

128. Parameter 709 - 710 are UNDEFINED PARAMETERS

129. Parameter 711

MESSAGE VALUECONTENT REMARKDEFAULT
Prt Repack(Report)Y/NSet to print Repack report on scale or clerkY

130. Parameter 712

MESSAGE VALUECONTENT REMARKDEFAULT
Prt Prepack(Report)Y/NSet to print Prepack report on scale or clerkY

131. Parameter 713

MESSAGEVALUECONTENTREMARKDEFAULT
Prt Negative (Report)Y/NSet to print Negative reportY

132. Parameter 714

MESSAGEVALUECONTENT REMARKDEFAULT
Prt No Sale Open(Report)Y/N Set to print No sale open countY

133. Parameter 715

MESSAGE VALUE CONTENT REMARK DEFAULT

PLU Report Type Numeric 0

134. Parameter 716

MESSAGE VALUE

CONTENT REMARK DEFAULT

Send Sale Date Type Y/N N

135. Parameter 717 \~ 719 are UNDEFINED PARAMETERS

136. Parameter 720

MESSAGE VALUE

CONTENT REMARK DEFAULT

Prt Zero Value Report Y/N Y

137. Parameter 721

MESSAGE VALUE CONTENT REMARK DEFAULT

Report Type Numeric 0

138. Parameter 722

MESSAGE

VALUE

CONTENT

REMARK

DEFAULT

Clear Clerk Trans. in Z-Report Y/N

N

139. Parameter 723

MESSAGE

VALUE

CONTENT

REMARK

DEFAULT

Send Real Time U.P. Change Numeric

0

140. Parameter 724

MESSAGE VALUE

CONTENT REMARK

DEFAULT

Use Total Discount Y/N N

141. Parameter 725

MESSAGE VALUE

CONTENT REMARK

DEFAULT

Label Change Mode Y/N N

  1. Parameter 726
MESSAGEVALUECONTENTREMARKDEFAULT
QR Barcode Add TotalY/NY = All Items in QR codeN = Single Item in QR codeN

143. Parameter 727 \~ 729 are UNDEFINED PARAMETERS

  1. Parameter 730
MESSAGEVALUECONTENTREMARKDEFAULT
Ethernet TCP/IPY/NY
  1. Parameter 731
MESSAGEVALUECONTENTREMARKDEFAULT
Wireless BridgeY/NNow says "Use Wireless LAN"N
  1. Parameter 732
MESSAGEVALUECONTENTREMARKDEFAULT
Use Small Font for PLU NameY/NN
  1. Parameter 733
MESSAGEVALUECONTENTREMARKDEFAULT
Label-Ticket Key Mode1??????2

151. Parameter 744

MESSAGE VALUE CONTENT REMARK DEFAULT

Speed Key Number? Self Service Model Only
Shown

152. Parameter 745

MESSAGE VALUE CONTENT REMARK DEFAULT

Speed Key Items? Self Service Model Only
Shown

153. Parameter 746

MESSAGE VALUE CONTENT REMARK DEFAULT

Use Auto ZeroY/N ??????N
Setting

154. Parameter 747

MESSAGE VALUE CONTENT REMARK DEFAULT

Self Key Type ?1=7x4Self Service Model Only
2=8x5
3=9x6
4=6x3

155. Parameter 748

MESSAGEVALUECONTENTREMARKDEFAULT
ory PageNumericReturn to Category Page Number100

156. Parameter 749

MESSAGEVALUECONTENTREMARKDEFAULT
After Sales Back to Home PageY/NAfter transaction complete return to Category Home pageY

157. Parameter 750

MESSAGE VALUE CONTENT REMARK DEFAULT

Out of PaperNumeric
Threshold (Label)
  1. Parameter 751
MESSAGEVALUECONTENTREMARKDEFAULT
Send Key ValueY/N????N
  1. Parameter 752
MESSAGEVALUECONTENTREMARKDEFAULT
Don't Display Images on Operator's ScreenY/N????N
  1. Parameter 753
MESSAGEVALUECONTENTREMARKDEFAULT
Touch SettingSensitivityNumeric??????12
  1. Parameter 754
MESSAGEVALUECONTENTREMARKDEFAULT
Use OZ in Fixed Weight UnitY/NN
  1. Parameter 755
MESSAGEVALUECONTENTREMARKDEFAULT
Print to FileY/NPrints Label to File (debug)N

166. Parameter 772

MESSAGE VALUE

CONTENT REMARK DEFAULT

Enable Discount Y/N Enable Discount Function & Menu Y

167. Parameter 773

MESSAGE VALUE

CONTENT REMARK DEFAULT

Enable TAX Table Y/N Enable Tax Function & Menu N

168. Parameter 774

MESSAGE VALUE

CONTENT REMARK DEFAULT

Enable Origin Y/N Enable Origin Function & Menu Y

169. Parameter 775

MESSAGE VALUE

CONTENT REMARK DEFAULT

Enable Tare Table Y/N Enable Tare Table Function & Menu N

170. Parameter 776

MESSAGE VALUE

CONTENT REMARK DEFAULT

Enable Nutri-Facts Y/N Enable Nutri-Facts Function & Menu Y

171. Parameter 777

MESSAGE VALUE

CONTENT

REMARK DEFAULT

Enable Traceability Y/N Enable Traceability Function & Menu Y

172. Parameter 778

MESSAGE VALUE

CONTENT REMARK DEFAULT

Enable Customer Y/N Enable Customer Function & Menu N

173. Parameter 779

MESSAGE VALUE

CONTENT REMARK DEFAULT

Enable Currency Y/N Enable Currency Function & Menu N

174. Parameter 780

MESSAGE VALUE

CONTENT

REMARK

DEFAULT

Enable Department Y/N Enable Department Y

  1. Parameter 781

MESSAGE VALUE

CONTENT REMARK DEFAULT

Enable Group Y/N Enable Group Y

  1. Parameter 782 is No Caption Parameter 783 \~ 795 are UNDEFINED PARAMETERS

  2. Parameter 796

MESSAGE VALUE

CONTENT REMARK DEFAULT

Use Tare Auto Zero Y/N N

  1. Parameter 797

MESSAGE VALUE

CONTENT REMARK DEFAULT

Use Full Tare Y/N Press Enter will reboot the scale N

  1. Parameter 798

MESSAGE

VALUE

CONTENT

REMARK

DEFAULT

Tare Clear Range

Numeric

0

  1. Parameter 799

MESSAGE

VALUE

CONTENT

REMARK

DEFAULT

A/D Filter Level

Numeric

0

Sommaire Cliquez un titre pour y accéder
Assistant notice
Powered by Anthropic
En attente de votre message
Informations produit

Marque : CAS

Modèle : PB-500

Catégorie : Balance