CHIME - Sonnette connectée RING - Notice d'utilisation et mode d'emploi gratuit

Type d'appareil	Sonnette connectée
Connexion	Wi-Fi
Alimentation	Adaptateur secteur
Installation	Plug and play
Compatibilité	Applications mobiles iOS et Android
Fonction principale	Alerte sonore sans fil
Portée	Jusqu'à 30 mètres
Son	Carillon réglable
Matériau	Plastique durable
Dimensions	Compacte, non précisé
Poids	Léger, non précisé
Installation sans fil	Oui
Indicateur LED	Oui
Garantie	Non précisé
Langues supportées	Multilingue

FOIRE AUX QUESTIONS - CHIME RING

Comment connecter mon RING RING CHIME à mon réseau Wi-Fi ?

Assurez-vous que votre RING RING CHIME est branché et allumé. Ouvrez l'application Ring, sélectionnez 'Configuration', puis 'Ajouter un appareil'. Suivez les instructions pour connecter le chime à votre réseau Wi-Fi.

Pourquoi mon RING RING CHIME ne sonne-t-il pas lorsque quelqu'un sonne à la porte ?

Vérifiez que le volume du chime est réglé à un niveau audible dans l'application Ring. Assurez-vous également que le chime est correctement connecté à votre réseau Wi-Fi et que votre sonnette Ring fonctionne normalement.

Comment régler le volume de mon RING RING CHIME ?

Ouvrez l'application Ring, sélectionnez votre RING RING CHIME, puis ajustez le volume à l'aide du curseur disponible dans les paramètres du chime.

Mon RING RING CHIME émet un bruit étrange, que faire ?

Essayez de redémarrer votre chime en le débranchant puis en le rebranchant. Si le problème persiste, vérifiez les mises à jour de l'application Ring et assurez-vous que votre appareil est à jour.

Comment changer le son de mon RING RING CHIME ?

Dans l'application Ring, sélectionnez votre RING RING CHIME, puis accédez aux paramètres de son. Vous pourrez choisir parmi une variété de sonneries disponibles.

Puis-je utiliser mon RING RING CHIME à l'extérieur ?

Non, le RING RING CHIME est conçu pour une utilisation intérieure uniquement. Ne l'exposez pas aux intempéries.

Comment réinitialiser mon RING RING CHIME aux paramètres d'usine ?

Appuyez et maintenez le bouton de réinitialisation situé à l'arrière du chime pendant environ 15 secondes jusqu'à ce que le voyant lumineux clignote. Cela réinitialisera le chime aux paramètres d'usine.

Mon RING RING CHIME ne se connecte pas à l'application, que faire ?

Assurez-vous que votre smartphone est connecté à Internet et que l'application Ring est à jour. Essayez de redémarrer l'application et de reconnecter le chime.

MODE D'EMPLOI CHIME RING

ring

White industrial air conditioner unit with ventilation grille and control panel (no visible text or symbols)

Chime

Setup Guide

Table of Contents 2

What's in the Box 3

Power Requirements 4

Quick Setup 5

Lighting Guide 6

With Ring, you're Always home.

What's in the Box

3

ring

1. Ring Chime
2. Wall plugs (U.S, UK, EU)
3. Quick Install Guide

Power Requirements

Ring Chime can be powered by plugging it into an outlet that supports 110 to 240 VAC; 0.6W.

Close-up of a white electrical socket with a circular button labeled 'ring' (no other text or symbols visible)

Quick Setup

1. Plug Chime into an outlet. The Ring logo on the front of the device will begin pulsing blue.
2. Open the Ring app and select Add Device
3. Choose Ring Chime and follow the in-app instructions to connect Chime to your Wi-Fi network.
4. Once connected to your Wi-Fi network, select one or more Ring devices to link Chime to.

Lighting Guide

The Ring logo located on the front of Chime lights up to indicate the device's status.

ring

Rapid Blinking

Scanning for available networks

Slow Pulse

Wi-Fi setup mode

Solid State

Connected to your Wi-Fi network.

Customer Support

7

For additional help, visit:

ring.com/help

For immediate assistance, we're available 7 days a week at:

[e-mail]

US 1 800 656 1918

UK 01727 263045

AU 1 300 205 983

NZ [phone]

Mexico (D.F) 52 55 8526 5445

Worldwide [phone]

Customer Support

7

For a list of all our customer support numbers, visit:

ring.com/callus

Hereby, Bot Home Automation, declares that this consumer electronic is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.ring.com/DoC.pdf.

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications to this equipment not authorized by Bot Home Automation may void its approval for operation.

Use this device in dry rooms only. Do not cover the device while operating. Do not open the housing. Protect this device from sunlight. Do not use this device outdoors. Disconnecting the plug will power the device off. Do not use the device if the plug or housing is defective, there is a risk of electric shock.

For best results, use type Li-lon batteries. Install only new batteries of the same type in your product. Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak. Do not mix old and new batteries. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. Do not dispose of batteries in fire. Batteries should be recycled or disposed of as per state and local guidelines.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

© 2016 Bot Home Automation, Inc.

RING, ALWAYS HOME, and CHIME are trademarks of Bot Home Automation, Inc.