TTLM - Clavier et souris sans fil GENIUS - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Clavier et souris sans fil
Marque	GENIUS
Modèle	TTLM (Wireless TwinTouch LuxeMate)
Alimentation clavier	2 piles AA
Alimentation souris	2 piles AA
Récepteur	USB, avec voyant LED vert
Portée	Environ 10 mètres (sans interférences)
Canaux ID	256 codes ID, réglage manuel possible
Fonctions clavier	Touches multimédia : My Computer, E-mail, WWW, Précédent, Suivant, Veille, Calculatrice, Lecteur multimédia, Volume +/-, Stop, Lecture/Pause
Fonctions souris	Bouton gauche, droit, molette (Magic-Roller), EasyJump (bureau et cyber), Auto-Panning, Zoom (Ctrl+molette)
Logiciel inclus	CD d'installation, pilotes pour personnalisation
Compatibilité système	Windows
Installation matérielle	Insérer les piles, brancher le récepteur USB, allumer l'ordinateur
Réglage des canaux	Appuyer sur RB (récepteur), MB (souris) et KB (clavier) dans les 20 secondes
Entretien	Nettoyer avec un chiffon doux et sec. Ne pas utiliser de solvants.
Sécurité	Ne pas mélanger des piles de types différents. Respecter la polarité.
Informations générales	Utilisation sur surface plane, non réfléchissante (éviter verre, métal, miroir). Distance minimale de 20 cm des autres appareils.

FOIRE AUX QUESTIONS - TTLM GENIUS

Comment installer le clavier et la souris TTLM GENIUS ?

Insérez deux piles AA dans la souris et deux piles AA dans le clavier. Branchez le récepteur USB sur un port libre de l'ordinateur. Allumez l'ordinateur. Pour une installation complète, insérez le CD fourni et suivez les instructions à l'écran.

Comment remplacer les piles ?

Lorsque la souris ne se déplace pas correctement ou que le clavier ne répond plus, remplacez les piles par des neuves. Ne mélangez pas des piles de types différents. Après le remplacement, il peut être nécessaire de refaire le réglage des canaux ID.

Comment régler les canaux ID si le clavier ou la souris ne fonctionne pas ?

Appuyez d'abord sur le bouton du récepteur (RB), puis sur le bouton sous la souris (MB) et enfin sur le bouton sous le clavier (KB) dans un délai de vingt secondes. La LED verte sur le récepteur s'allume en fonctionnement normal.

Quels types de surfaces éviter pour la souris optique ?

Évitez d'utiliser la souris sur du verre, un miroir, du fer, du velours noir ou toute surface métallique, car cela peut réduire la portée ou perturber le fonctionnement.

Que faire si le clavier USB ne fonctionne pas sous DOS ou dans le BIOS ?

Pour les anciens BIOS, utilisez temporairement un clavier PS/2 pour accéder au BIOS et activer les options 'USB Controller' et 'USB Legacy' (clavier USB). Redémarrez puis rebranchez le clavier USB.

Comment utiliser les touches de fonction du clavier (My Computer, E-mail, etc.) ?

Ces touches sont préprogrammées. Par exemple, My Computer ouvre le dossier Poste de travail, E-mail lance votre client de messagerie, WWW ouvre le navigateur Internet. Consultez la liste complète dans la notice.

Comment configurer le bouton EasyJump de la souris ?

Le bouton EasyJump peut être assigné via le panneau de configuration du logiciel Genius. Il propose deux modes : Office EasyJump (applications courantes et fonctions Cyber) et Traditional EasyJump (huit fonctions Cyber). Faites un clic droit sur le logo Genius dans le Frisbee pour basculer entre les modes.

Comment désinstaller le logiciel Genius ?

Sous Windows, cliquez sur Démarrer, allez dans Programmes, puis dans le dossier du logiciel de la souris, et sélectionnez 'Désinstaller le logiciel'.

Puis-je utiliser plusieurs ensembles TTLM dans la même pièce ?

Un seul ensemble peut être utilisé à la fois dans une zone de 10 mètres carrés. Si plusieurs ensembles sont utilisés, des interférences peuvent survenir entre les récepteurs et les périphériques.

Comment personnaliser les boutons de la souris ?

Ouvrez le panneau de configuration du logiciel Genius en double-cliquant sur l'icône dans la barre des tâches ou via le groupe de programmes. Dans l'onglet 'Boutons', vous pouvez assigner des fonctions comme EasyJump, Auto-Panning, Zoom, etc., aux boutons droit et molette.

MODE D'EMPLOI TTLM GENIUS

Hardware Installation

1. Install two AA batteries in the mouse and two AA batteries in the keyboard.
2. You can connect the receiver to a USB port of a PC.

3. Turn on your computer.

Software Installation

1. Make sure the mouse and keyboard is connected to the computer.
2. Put the Setup disk (or CD) into the disk drive.
3. Follow the instructions on the screen to finish the software installation.

Replace Batteries

If you feel the mouse does not move smooth as usual or the keyboard does not work when typing, then the batteries have lost their charge, so please replace them. Furthermore, do not mix or use different types of batteries at the same time. You should set up the channel every time you replace the batteries.

ID channel setting

The channel buttons are factory preset. The green LED, the data transmission indicator, on the receiver will be lit when the keyboard or mouse is in normal operation. If your keyboard/mouse does not work, then you have to set the ID channel setting. Please press the button on the receiver first (RB) and press the button under the mouse (MB) and the keyboard (KB) within twenty seconds. So you press RB, MB and KB to set the channel setting.

Warning: (Troubleshooting)

1. Please do not use the wireless optical mouse on a desk that is made of glass, mirror, iron, or black velvet. Also a desk that is made of metal will reduce the receiving distance of the keyboard and mouse.
2. Before the first installation is completed (channel setting ready), the keyboard will not work in DOS. If your USB keyboard does not work in BIOS, DOS or Windows, then use another PS2 keyboard to make the USB controller (USB function) and USB legacy (USB keyboard) "On" in the BIOS setup. This may occur with older BIOS versions. Then unplug the PS/2 keyboard and plug in your USB keyboard and everything should be working properly.
3. The Wireless TwinTouch LuxeMate channel provides 256 ID-codes, and it automatically selects the ID # for your keyboard and mouse. You can only set up one Wireless TwinTouch LuxeMate at a time. But if you have additional Wireless TwinTouch LuxeMate sets in an area of 10 square meters, more interference may occur between the receiver and your keyboard and mouse.
4. The Wireless TwinTouch LuxeMate with radio frequency gives you free movement and an enjoyable experience. For optimal performance, place the receiver at least 8 inches (about 20~cm ) away from the mouse and other electrical devices, such as the computer, monitor, and etc.

Factory Setting

1. Mouse:

Button Assignments

The Button Assignment feature lets you work in a more efficient way because you can assign the most frequently used commands in Windows to the mouse buttons.

Magic-Roller Press the "Magic-Roller" to surf the Internet and Windows documents

Left Button Provides traditional mouse functions such as click, double click and drag.

Right Button You can assign this button frequently used keyboard and mouse functions in addition to features like EasyJump, Auto-Panning, Zoom, etc.

Roller Button You can assign this button frequently used keyboard and mouse functions in addition to features like EasyJump, Auto-Panning, Zoom, etc.

2. Keyboard:

1. My Computer: Open My Computer folder from Windows
2. E-mail: Open mail folder
3. WWW: Open browser in Netscape or IE
4. Back: See last page when viewing the Internet
5. Forward: Go to next page when viewing the Internet
6. Sleep: Turn system into sleep mode
7. Calculator: Open the calculator from Windows
8. Media: Media player program
9. Volume: Vol. Up
10. Stop: Stop play of audio or video CD's
11. Play/Pause: Play and pause of audio or video CD's
12. Volume: Vol. Down

"EasyJump for Windows

"EasyJump" now has two working modes: Office, EasyJump mode and Traditional EasyJump mode.

"Office EasyJump" lets you use eight commonly used applications and 16 Cyber functions more easily and quickly.

Once you press the button you assigned, "Office EasyJump" will be displayed on a Frisbee. Note that the functions are only available in the applications they belong to.

Click this application button to show the mouse control panel. You can check or modify the mouse properties.

Click this function and the pan icon appears. You can move the mouse in any direction in a document or a spreadsheet. The farther you move the pointer from the pan icon, the faster you can pan in that direction.

Click this function and Office EasyJump Frisbee will always be on the screen and the button will change to Click it again to cancel this effect.

This is a programmable application button. Press the right button on this icon and a dialog box will display for you to select an executable program. Click on this button to launch your specific application.

Click this function to implement the "replace" function in the current application.

Click on this application to launch Microsoft Word.

Click this function to perform the "cut" function in Word.

Click this function to implement the "paste" function in Word.

Click on this application to launch Microsoft Excel.

Click this function to implement the "select all" function in Excel.

Click this function to perform the "undo" function in Excel.

Click on this application to launch Microsoft PowerPoint.

Click this function to implement the "zoom in" function in PowerPoint.

Click this function to implement the "zoom out" function in PowerPoint.

Click on this application to launch Outlook Express or any other email client application installed in your system.

Click this function to open a new email.

Click this function to forward a selected email in your mailbox.

Click on this application to open Microsoft Internet Explore or any other Internet browser installed in your system.

Click this function to return to the previous web page in your open Internet browser.

Click this function to more forward to the next web page in your open Internet browser.

Click on this application to launch Windows media player or any other multimedia player installed in your system.

Click this function to play/pause the current running media player.

Click this function to stop the current running media player.

Note: All the functions related to Office applications are programmable. Place the cursor on the function icon you want to change, and click the right button to select or reset the unit from the popup menu. From the dialog box, you can choose another function to use in the EasyJump Frisbee.

To change from Office EasyJump mode to Traditional EasyJump mode, just click the right button on the Genius logo in the center of the EasyJump Frisbee.

The "Traditional EasyJump" lets you use eight Cyber functions more easily and quickly.

Once you press the button you assigned, the "EasyJump" Frisbee will pop up and eight functions will be displayed on Frisbee.

Click this button to close the current window.

Click this button and the cursor will jump to the horizontal scrollbar. When you move your mouse, the open document or spreadsheet will scroll horizontally.

Click this button and the cursor will jump to the vertical toolbar. When you move your mouse, the open document or spreadsheet will scroll vertically. Click this button to open the Start Menu.

Click this button to open the Help button.

Click this button to open the Genius Mouse Control Panel.

Click the button and you can move the mouse in any direction in a document or a spreadsheet. The farther you move the pointer from the pan icon, the faster you can pan in that direction.

The buttons in "EasyJump Options" are especially used for the Internet. The default function is "Open Browser" (button like). You can select other functions from "EasyJump Options" in the "Settings" folder of the Genius Mouse Control Panel. The functions in "EasyJump Options" are:

"Add to Favorite [IE]"

"Add Bookmark [NetScape]"

"Go Next [Forward]"

"Organize Favorite [IE]"

"Edit Bookmark [NetScape]"

"Go Previous [Back]"

"Run Application"

Switch Applications

When the right-button or Magic-Roller is set to "Switch AP", you can quickly switch from one open application to another without moving the mouse. To switch to a specific application, press the right button or the Magic-Roller to select the application.

Zoom function for Value and IE Applications

Press the "Ctrl" key and move the "Magic-Roller" forward (or backward) to set the Zoom In/Out function. You can also use just one hand to Zoom In/Out: set the right button to be the "Ctrl" function, press the right button and move the "Magic-Roller" forward (or backward) to enlarge (or decrease) the document window.

Auto-Panning

You can set this function in the Button Assignment menu. Move the mouse, and the document moves in the direction you just moved.

Uninstall the Software

Follow these instructions to remove the software from your hard disk. In Windows, click on the Start button, select Programs and move to the mouse software. Then click on Uninstall software.

Customize the Software

This section shows you how to customize the software. To open the software control panel, you can double-click on the icon in the task bar or select the "Software" icon from the program group.

Close the Software

Click the right button on the taskbar, and select "Close Software" to close the software.