SRX 1 - Autoradio AUDISON - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil SRX 1 AUDISON au format PDF.
| Type de produit | Autoradio |
| Marque | Audison |
| Modèle | SRX 1 |
| Dimensions (L x H x P) | 178 x 50 x 160 mm (1 DIN) |
| Poids | 1,2 kg |
| Alimentation | 12 V DC (négatif à la masse) |
| Puissance de sortie maximale | 4 x 50 W |
| Puissance de sortie RMS | 4 x 25 W (sous 4 ohms) |
| Récepteur radio | FM/AM avec RDS, 30 présélections |
| Lecteur de disques | CD, CD-R/RW, MP3 |
| Connectivité | Entrée ligne avant (RCA), port USB avant, entrée auxiliaire (3,5 mm) |
| Bluetooth | Intégré pour appel mains-libres et streaming audio |
| Écran | LCD rétroéclairé, affichage des informations |
| Télécommande | Incluse, filaire ou infrarouge selon version |
| Égaliseur | Préréglages intégrés (Rock, Jazz, Pop, Classique, Vocal) |
| Entrée antenne | Connecteur ISO |
| Entretien | Nettoyer avec un chiffon doux et sec. Éviter les solvants. |
| Sécurité | Fusible de protection (15 A) sur le câble d'alimentation |
| Pièces détachées et réparabilité | Contactez le service après-vente Audison pour les pièces et réparations |
| Informations générales | Utilisation dans un véhicule 12 V. Température de fonctionnement : -20°C à +60°C |
FOIRE AUX QUESTIONS - SRX 1 AUDISON
Questions des utilisateurs sur SRX 1 AUDISON
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Autoradio au format PDF gratuitement ! Retrouvez votre notice SRX 1 - AUDISON et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil SRX 1 de la marque AUDISON.
MODE D'EMPLOI SRX 1 AUDISON
GB
INTRODUCTION
Thanks for preferring this product. Its very good performances will insure you utmost satisfaction. Please read this owner's manual paying special attention to our recommendations in order to get the best performances without problems.
Safety precautions
- The vehicle electric system must have 12VDC voltage with negative to ground. Make sure your car has it in order to avoid any damages to your amplifier and to the car itself.
- Suitably fix the amplifier with the screws given with it: pay almost attention if you install it into the driver's compartment. Use extra fixing systems if you install it inside the bonnet. If the amplifier detaches itself while you are driving, it can severely damage people and other vehicles.
- Power supply cable must have mechanically resistant and self-extinguishing insulation. Its section has to comply with what is indicated in this manual. When placing it, avoid to press it against cutting parts or close to mechanical moving objects. Make sure it is suitably fixed all along its length. Put a clamping screw between positive and negative cable just close to the amplifier power supply terminal block.
- Put a fuse holder close to the battery positive terminal; connect one end of the power supply cable to it a connecting its other end to the amplifier. The fuse value must be 50% higher than the amplifier built in one. In case the cable supplies several amplifiers, the fuse value will have to be 50% higher to the sum of the values of all other fuses in the system.
- For safer driving, we recommend to adjust volume not to drown external traffic sounds.
- WARNING. When the amplifier works in particularly hard conditions, it can reach 90°C (194°F). Make sure its temperature is safe before touching it.
SRx project
SRx project is the best compromise between compactedness, versatility, power performances, sound quality and reliability you can nowadays find in the marketplace.
All its parts, like electronics, connections, mechanical components, were realized by re-examining several aspects of automotive amplifiers, looking for innovative solutions aiming at production improvement and eliminating complex elements that, anyway, wouldn't have enhanced performances.
Final stage electronic circuitry proves it. Such amplicons normally use the simple and cheap B circuitry; SR's, on the contrary, don't give up A3 class higher quality. In order to get it, we designed a very innovative circuitry called DYNAB (Dynamic A9) Class. It is a circuitry for automatic bias current adjustment, it is simple to calibrate and it has constant temperature, typical of traditional AB class. DYNAB combines B class easeiness with AB class quality. The standard C type is an exponential, too. We choose terminal blocks that are not normally employed in our stereo, either commonly used in professional electro-technical field. Approved by the most important international safety norms institutions, they have screw clamp connections (that don't damage cable) and self-extinguishing body.
External plastic parts are special, too. Although they touch aluminium parts that can reach 90°C (194°F), they don't have any
SRx 1
The SRx 1 is a mono amplifier equipped with many unique features. A 24 dB LO PASS FILTER is featured which is fully adjustable between 40 and 120 Hz which can also be defeated for full range operation.
Complementing the low frequency range is a 24 dB SUBSONIC FILTER as well as a SUB EQ parametric equalizer (bass boost) adjustable in both amplitude and frequency. It is further enhanced with the truly innovative feature of ELECTRIC BASS and ACOUSTIC BASS selectable speaker outputs. You may choose between these two outputs to obtain the best match between this amplifier and the loudspeaker system used.
These features allow this unit to be used as a full range amplifier in a Dual Mono configuration or as a specialized low frequency subwoofer amplifier. The SIGNAL SENSE turn on and HI LEVEL
Functioning precautions
• Install the amplifier in locations where temperature is between 0°C (32°F) and 55°C (131°F).
- There must be suitable air circulation where you install the amplifier; this area must not be affected by humidity, rain, external deposits or parts coming from the vehicle mechanical devices. Lethe amplifier ends (i.e. the parts where air goes in and out) be at least 5 cm (2') far from possible walls.
- When installing speakers and the cables that connect them, make sure that non-insulated parts don't touch the car chassis. If they do, the amplifier protection intervenes.
- Listening level calibration is made by adjusting the source volume up to 3V of its maximum level; then, adjust the amplifier levels until you can hear distortions.
Maintenance and reliability precautions
- Periodically clean the amplifier avoiding to use aggressive solvents that might damage plastic or painted parts. Dampen a piece of cloth with water and soap, wring it and clean the amplifier with it. Then, clean the amplifier by using a piece of cloth dampened with water only; eventually clean it with a dry piece of cloth.
Remove dust and solid deposits from the open areas where you can find front controls and from side areas at the amplifier ends, where air should go in and out. This must be periodically done by using a screw driver or a small brush. Avoid to use compressed air since it would push the solid parts into the amplifier. If necessary, please contact a specialised after sale service centre for internal cleaning. Possible deposits might obstruct or stop the cooling fan; the amplifier would then go in safety.
problems since they are made of a special polymer that resists to 150°C (302°F) and to crashes (similar to the material modern cars bumbers are made of).
Our main goal when designing SRx was they had to have the same technical features as so-deemed higher level amplifiers. We employed the latest TO247 linear transistors for final stage. We paid almost attention to input stages, both Pre and Hi Level, using LNS circuit for noise rejection. Built-in crossover is extremely versatile and allows lots of configurations.
Power supply is not stabilised, in order to insure maximum efficiency; it has secondary filtering toroidal coil to increase efficiency as well as reliability. Input battery voltage was filtered through a common-mode inductor, in order to decrease radio-disturbances and to comply with the latest car norms (95/54/EC European Norms and ECE10 International Norms).
Protection circuits include: maximum temperature, output overload, output DC, RGP (Resettable Ground Protection) to detect short circuit between the output and the chassis, general protection fuse inside the amplifier. When protection intervenes, Safety red indicator is on. When the problem that made the amplifier go in Safety is solved, the amplifier starts working again.
You can connect VSR, subwoofer volume remote control, to all SRx amplifiers; it is optional.
INPUT functions allow this amplifier to be easily connected to OEM factory audio systems. Usually these factory systems are not equipped with low-level pre-amp outputs or a remote turn on output. The SRx 1 solves this problem, as it is equipped with HI LEVEL INPUT to connect to the loudspeaker outputs of a factory system. When this amplifier is connected through these inputs, the amplifier turns on automatically. It can also supply other amplifiers in the system with REMOTE OUT turn on control. Furthermore, since this section is equipped not only in high-level audio input, but can also include the Level Speaker OUT BYPASS. Output, the SRx can give the previous mentioned amplifier's signal to be amplified. You can also use the OUT BYPASS to connect back to the factory speaker system.
1. INSTALLATION
A. Plates opening and fixing
7 • Plates removing - Remove left and right plates by pressing where indicated.
2 Fixing - Fix the device through the 4 screws given with it.
3 • Plates mounting - Mount left and right plates again minding to insert their tongues into fixing screws housing. Strongly press where indicated.
B. Fuse replacement
- Open the right plate and replace fuse with the spare one given with the amplifier.
2. CONNECTIONS
A. Pre in (preamplified inputs)
Applied signal must be between 0.2 VRMS and 5 VRMS.
- Left and right channels input. For the amplified output it has the mix L + R function.
B. Out bypass (preamplified inputs)
- Left and right channels output. The type of signal available on this output is stereo and it comes from the Pre In input.
C. VSR (Sub volume)
- Inputs for VSR (optional kit for sub volume remote control). Connect them to VSR, optional kit for subwoofer level remote control. This kit consists of VSR control and VCA.S module, to install into the proper housing.
D. Remote In / Out - Remote In: input for the amplifier remote switching on.
- Remote Out: turn on output of other amplifiers. Using the speakers in - IN input, in the case of head unit with internal amplifier BTL type (bridge), it isn't necessary the remote control for turning on the amplifier. In this case on the Remote In terminal, the remote control for turning of other amplifiers is available.
E. Speakers in: IN (amplified Input signals)
Red connections
- Left and right channels speaker level input. Not to be used if you employ Pre In preamplified signal connection.
- Automatic signal sense turn on:
If the head unit has a driven amplified output from an internal amplifier BTL type (bridge), you will not need the Remote In to turn on, connecting this input in parallel to the existing speakers or to the head unit speaker output.
3. FUNCTIONS AND CONTROLS
A. On / Safety (switching on / protection)
1 • Green led indicator (ON).
It indicates the amplifier is on
2 • Red led Indicator (SAFETY).
It indicates protection intervention.
B. Level (0.2 ± 5 VRMS)
• It adjust amplifier sensitivity.
C. Sub Equalizer level
- Adjust the equalization level of the Sub between 0 and +4 dB.
The frequencies are selectable from 40 to 72 Hz by means of Sub EQ controller - FILTERS section.
D. Subwoofer Mode
- It activates the Subwoofer LO-PASS (LO) filter or it excludes it (FULL).
4. CONFIGURATION TABLE
It indicates how to position the different selectors for the control configurations of the Subsonic filter, Sub Equalizer and Subwoofer filter.
5. CONNECTIONS AND CONFIGURATIONS EXAMPLES
WARNING! For extra protection, we recommend to put a strip fuse along the cable that connects the battery positive pole to the amplifier +BATT terminal. This fuse must be installed approx. 25 cm far from the battery. Its value will have to be 50% higher
C. VSR Installation (optional)
- Open the left plate and put VCA switch on ON. Insert VCA.S module into the proper slides on the plate end, then, into the connector.
D. Connection cables
• Power supply cables (4/5m long): with 4 Ohm loads, use audison cable POWERFLOW 9; with 2 Ohm loads, use audison cable POWERFLOW 7.
- * Speakers output cables
3 • Cables for speaker level signal inputs, for remote and VSR.
F. Speakers In: OUT Bypass
Red connections
- Speakers outputs connected in parallel to Speakers In - IN. This output can be used to connect speakers that will be driven by the amplified signal present on the Speakers In - IN.
G. Speakers Out
Speaker connection outputs. There are two groups of output: ACoustIC BASS and ELECTRIC BASS. Each group has two terminals for connecting two speakers of 4 Ohms. The two groups of outputs permit the best acoustic matching with the speaker system used. To select which group to use you need to experiment which one is more suitable to the specific case. Refer to the attached page of this owner's manual, "Acoustic Bass and Electric Bass explained".
Warning:
- Do not use both Electric Bass and Acoustic Bass outputs at the same line in the case we own each other.
• On each terminal you can connect only one 4 Ohms speaker.
- For a 2 Ohms connections of the amplifier you must connect the second speaker on the terminal near the same group respecting the polarities.
- In the case of double voice coil speakers, each voice coil must be connected on the single terminal of the same group respecting the polarities.
H. Power
• Terminals for power supply cables connection
(battery: 12V). Connect + terminal to the battery positive and - to the car chassis. Voltage is 12 VDC with negative to ground.
E. Phase
- It inverts the signal phase present on the output terminals. It can be useful to align the Subwoofer to the acoustic level with the front system.
F. Subsonic Mode
- It activates (ON) the Subsonic filter or it excludes it (OFF).
G. Filters adjusting
1 • It adjusts 24dB/Oct. LO-PASS Subwoofer filter cut-off frequency between 40 Hz and 120 Hz.
2 • It adjusts the emphasis central band frequency of the SUB EQ. between 40 Hz and 72 Hz.
3 • It permits to select the 24 dB/OcL LO-PASS frequency of the Subsonic filter at 18 Hz, 26 Hz or 34 Hz.

audison
Owner's Manual
CAR POWER AMPLIFIER


natural_image
Line drawing of a portable air conditioner unit with ventilation slots and fan (no text or symbols)TECHNICAL FEATURES
POWER SUPPLY
| Power supply voltage: | 11÷15 VDC |
| Idling current: | 0.6 A |
| Idling current when off: | < 0.04 mA |
| Musical max consumption: | 20 A |
AMPLIFIER STAGE
| Distortion - THD (1kHz, 4 Ohms): | 0.02% |
| Electric Bass bandwidth (-3 dB): | 4Hz ÷ 50 kHz |
| Acoustic Bass bandwidth (-3 dB): | 4Hz ÷ 25 kHz |
| S/N Ratio (A weighed @1 V): | 95dB |
| Electric Bass damping factor (1kHz, 4 Ohms): | 300 |
| Acoustic Bass damping factor (1kHz, 4 Ohms): | 70 |
| Pre In input sensitivity: | 0.2 ± 5V |
| Speakers In input sensitivity: | 0.4 ± 10V |
| Pre In input impedance: | 15 KOhms |
| Speakers In input impedance: | 100 Ohms |
| LOAD IMPEDANCE: | 4 - 2 Ohms |
NOMINAL OUTPUT POWER (RMS)
NP @ 12VDC, THD 0.3%, 4 Ohms: . 150 W x 1
OUTPUT POWER (RMS) @13.8 VDC; THD 1%:
- 1ch (4 Ohms): 210 W x 1 - 1ch (2 Ohms): 350 W x 1
FILTERS/INPUTS
| Inputs: | Pre In / Speakers In - IN |
| Outputs: | Pre Out (bypass)Speakers In - OUT (bypass) |
| Subwoofer fi iter: | Full/ lo-pass 24dB/Oct. (40 ÷ 120 Hz) |
| Sub equalizer fi iter: | 40 ÷ 72 Hz |
| Sub equalizer level: | 0 ÷ (+4dB) |
| Subsonic fi iter: | OFF/ 24dB/Oct. |
| Subsonic set: | (18 / 26 / 34 Hz) |
| Phase switch: | 0 / 180^ |
OTHER FUNCTIONS
| Signal sense turn on (from BTL amp): Speakers In | |
| Remote In: | 7÷15 VDC - 1 mA |
| Remote Out (by signal sense turn on): | |
| 12 VDC - 10 mA | |
| SUB volume remote control (optional): | VSR |
| Fuse (strip): | 20 A |
| Protection: | temperature >85°C (185°F),output DC voltage, overload |
| Green / red led indicators: | ON / SAFETY |
| Cooler fan turn on: | 55°C (131°F) |
MAX SIZE (D x H x L): . . 178 x 49.5 x 320 mm WEIGHT: . . . . . . . . . . . . . . . . . . . . . . . . 2.4 Kg
elettromedia
62018 Potenza Picena (MC) Italy • Tel. 0733.870870 • Fax 0733.870880 • http://www.audison.com
CONNECTIONS AND CONFIGURATIONS EXAMPLES
WARNING!
12 Volts battery properties


SUB


FRONT + SUB
PRE OUT

flowchart
graph TD
A["Pre Out"] --> B["Remote"]
B --> C["Subwoofer"]
C --> D["VSR"]
D --> E["4 Ohms Subwoofer"]
E --> F["Tweeter"]
E --> G["Wooter"]
E --> H["CX"]
H --> I["Tweeter"]
H --> J["CX"]
style A fill:#f9f,stroke:#333
style B fill:#ccf,stroke:#333
style C fill:#cfc,stroke:#333
style D fill:#fcc,stroke:#333
style E fill:#cff,stroke:#333
style F fill:#ffc,stroke:#333
style G fill:#ffc,stroke:#333
style H fill:#ffc,stroke:#333
style I fill:#ffc,stroke:#333
style J fill:#ffc,stroke:#333
FRONT + SUB
SPEAKER LEVEL OUT

flowchart
graph TD
A["SRX19"] --> B["Remote In"]
B --> C["Front L"]
B --> D["Front R"]
E["SRX20"] --> F["Remote Out"]
F --> G["Front R"]
H["4 Ohms Subwoofer"] --> I["+"]
J["RUT"] --> K["+"]
L["L"] --> M["R"]
N["R"] --> O["L"]
P["+"] --> Q["-"]
CX PASSIVE COLOSOVER
CX PASS
CX PASSEM CROSSOVER



| SUBSONICSUBEQUALIZERSUBWOOFER | RESPONSE CURVE | |||||
| MODEF | REQ.MODE | FREQ.LEV | ELFREQ. | |||
ELECTRIC BASS AND ACOUSTIC BASS EXPLAINED
The SRx1 amplifier was created for maximum acoustic enhancement and enjoyment of low range frequencies, allowing the best match between this amplifier and the chosen subwoofer system. For this reason, the SRx1 is designed with two groups of separate speaker outputs labelled: Electric Bass and Acoustic Bass. Each group includes two pairs of terminals. Because of the unique circuit topology of this amplifier, it is required that only a four-ohm load be connected to each terminal for a total load of two-ohms. For example, if you are using a dual four-ohm voice coil subwoofer, each coil should be connected to a separate terminal. No matter what configuration of subwoofer's you use, each terminal must be connected to a four-ohm load or no load. Please see further wiring confi gurations in the owners manual.
WARNING: Do not use both Electric Bass and Acoustic Bass outputs at the same time. You must choose only one output: Electric Bass or Acoustic Bass.
The two different modes are distinguished by the different characterization of the bass timbre; however, this is not accomplished through filtered equalization of the sound, but through the variation of the fi nal output stage characteristics. Some electric parameters also vary, the most important being the damping factor, which determines the ability of the amplifier to control the subwoofer. The choice of which output group you should use, strongly depends on the listener's
If you use this amplifier to drive full range loudspeakers, for instance in a Dual Mono configuration, you have a choice of the bass timbre according to the output terminals you use. Following is a technical description of the output choices. ELECTRIC BASS Output: Damping Factor 300 A precise, deep and stable bass, without any specific coloration, acoustically characterizes this output. This setting is best for under damped loudspeaker/enclosure systems (Q of 0.7 to 1), generally definable as Reflex (vented) systems. On these systems, it keeps better control of the woofer under high power applications. ACOUSTIC BASS Output: Damping Factor 70 BIG bass, highlighting dynamic impact, acoustically characterizes this output. It is especially suitable for techno, electronica and club music and is especially useable for achieving high SPL scores. We suggest its use for over damped loudspeaker/enclosure systems (Q of 0.5 to 0.7), generally definable as Acoustic Suspension (sealed) systems.
No one setting is correct for every listener. We suggest you try listening to your music in both output modes and make your decision accordingly. Close your eyes, sit back, listen and let your ears make the decision.
mono amplifier with crossover










2 CONNECTIONS
F. Speakers In - OUT BYPASS
C. VSR E. Speakers In - IN
D. Remote In / Out
31
2.1
2.1
2.1
2.1
(1) 2017年1月1日,公司与关联方发生的关联交易总额为人民币4,500万元。
(1) 2017年1月1日,公司与关联方发生的关联交易总额为人民币4,500万元。
(1) 2017年1月1日,公司与关联方发生的关联交易总额为人民币4,500万元。
(1) 2017年1月1日,公司与关联方发生的关联交易总额为人民币4,500万元。
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
(1) 2016年1月27日 星期六、2016年1月28日 星期六、2016年1月29日 星期六、2016年1月30日 星期六、2016年1月31日 星期六、2016年1月32日 星期六、2016年1月33日 星期六、2016年1月34日 星期六、2016年1月35日 星期六、2016年1月36日 星期六、2016年1月37日 星期六、2016年1月38日 星期六、2016年1月39日 星期六、2016年1月40日 星期六、2016年1月41日 星期六、2016年1月42日 星期六、2016年1月43日 星期六、2016年1月44日 星期六、2016年1月45日 星期六、2016年1月46日 星期六、2016年1月47日 星期六、2016年1月48日 星期六、2016年1月49日 星期六、2016年1月50日 星期六、2016年1月51日 星期六、2016年1月52日 星期六、2016年1月53日 星期六、2016年1月54日 星期六、2016年1月55日 星期六、2016年1月56日 星期六、2016年1月57日 星期六、2016年1月58日 星期六、2016年1月59日 星期六、2016年1月60日 星期六、2016年1月61日 星期六、2016年1月62日 星期六、2016年1月63日 星期六、2016年1月64日 星期六、2016年1月65日 星期六、2016年1月66日 星期六、2016年1月67日 星期六、2016年1月68日 星期六、2016年1月69日 星期六、2016年1月70日 星期六、2016年1月71日 星期六、2016年1月72日 星期六、2016年1月73日 星期六、2016年1月74日 星期六、2016年1月75日 星期六、2016年1月76日 星期六、2016年1月77日 星期六、2016年1月78日 星期六、2016年1月79日 星期六、2016年1月80日 星期六、2016年1月81日 星期六、2016年1月82日 星期六、2016年1月83日 星期六、2016年1月84日 星期六、2016年1月85日 星期六、2016年1月86日 星期六、2016年1月87日 星期六、2016年1月88日 星期六、2016年1月89日 星期六、2016年1月90日 星期六、2016年1月91日 星期六、2016年1月92日 星期六、2016年1月93日 星期六、2016年1月94日 星期六、2016年1月95日 星期六、2016年1月96日 星期六、2016年1月97日 星期六、2016年1月98日 星期六、2016年1月99日 星期六、2016年1月100日 星期六、2016年
-
-
[Non-Text]
广力云
1
-
-
m = 311
[Non-Text]
2017年
-
-
-
[Non-Text]
广力云
2
1
-
-
1
m = 311
1
- 2017年
-
-
F
1
-
-
1
广力云智慧零售收银系统
[Non-Text]
单位:元
The image is too blurry to recognize any text content.
1
1
[Non-Text]
[Non-Text]
广力云
-
m = 311
-
m = 311
m = 311
m = 311
(No text)
(五) 2017
单位:元
(1)
公司简介
[Non-Text]
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
单位:元
单位:元
单位:元
(五)
(二)利润分配
(五) 2017年1月
- 2017年
1.2.3
单位:元
(No text)
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
。
- 2017年
表决
单位:元
(四) 陈丽
(1)
(10) 项 目
表决方式:
- 2017年
公司代码
- 2017
m = 311
m = 311
m = 311
m = 311
m = 311
表决结果:
重要内容
•
2.1
(1)
法定代表人:
(No text)
(五) 2017年1月1日
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
表决结果:
(1)
(五) 2017年
www.niuni
-
m = 311
m = 311
m = 311
m = 311
m = 311
-
-
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
1
m = 311
m = 311
m = 311
(1) 2017年1月1日,公司召开2017年第一次临时股东大会,并于2017年3月15日以通讯方式召开。
表决结果:
重要内容
•
•
•
•
•
- 本次股东大会的决议
表决结果:
表决结果:
表决结果:
表决结果:
表决结果:
重要内容
重要内容
表决结果:
表决结果:
表决结果:
表决结果:
表决结果:
表决结果:
表决结果:
表决结果:
表决结果:
单位:元
单位:元
单位:元
单位:元
单位:元
表决:
单位:元
单位:元
单位:元
单位:元
单位:元
单位:元
单位:元