Q: How to reset the COOLER MASTER CK721 to factory settings?

To reset the COOLER MASTER CK721 to factory settings , follow these steps: Press and hold the FN + R keys simultaneously for 5 seconds. The keyboard will automatically restart and return to its default factory settings. This operation will erase all previous Bluetooth pairings and reset the RGB backlight settings. You will see a flashing blue light for a few seconds, followed by a steady green light (for 3 seconds) to confirm that the reset was successful and the keyboard is ready to be configured again. This procedure is useful if the keyboard is not responding correctly or if you want to pair it with another device without keeping the old pairings.

Question 1

My COOLER MASTER CK721 keyboard lights up but doesn't type anything - how to fix it?

Accepted Answer

If your CK721 keyboard lights up (the LEDs activate) but the keys do not send any characters to your computer, this generally indicates a connection issue or a loss of synchronization. Here’s how to diagnose and fix it:

1. Check the active connection mode

The CK721 supports three modes: Bluetooth, 2.4GHz wireless (with dongle), and USB-C wired. If you were using Bluetooth and nothing works, the keyboard may have disconnected.

Bluetooth Mode: Press FN + DEL/PGUP/PGDN for 5 seconds to restart pairing. The indicator should blink blue (3 times per second) - that's a good sign.
2.4GHz Mode: Reinsert the USB dongle into your computer. The connection should establish automatically.
Wired Mode: Plug the USB-C cable directly into your PC to test if the keyboard responds in wired connection (no battery used).

2. Low or uncharged battery

Even if the LEDs light up, a very low battery can prevent keyboard data transmission. Fully charge the CK721 by connecting the USB-C cable: the indicator turns red while charging, then green once charged (2-3 hours for a full charge).

3. Reset the keyboard

If none of the above tests work, a factory reset will restore the connection:

Hold FN + R for 5 seconds
This resets all Bluetooth pairings and restores default settings
Then, reconnect via Bluetooth or 2.4GHz as during installation

If after these steps the keyboard still lights up but the keys remain unresponsive, there may be a hardware issue with the switches or the detection circuit. In this case, contact COOLER MASTER for diagnosis or replacement.

Question 2

How to reset the COOLER MASTER CK721 to factory settings?

Accepted Answer

To reset the COOLER MASTER CK721 to factory settings, follow these steps:

Press and hold the FN + R keys simultaneously for 5 seconds.

The keyboard will automatically restart and return to its default factory settings. This operation will erase all previous Bluetooth pairings and reset the RGB backlight settings.

You will see a flashing blue light for a few seconds, followed by a steady green light (for 3 seconds) to confirm that the reset was successful and the keyboard is ready to be configured again.

This procedure is useful if the keyboard is not responding correctly or if you want to pair it with another device without keeping the old pairings.

User manual COOLER MASTER Keyboard : user manuals and guides in PDF

Models COOLER MASTER Keyboard most viewed

Other categories COOLER MASTER

Recent questions about Keyboard COOLER MASTER