How to modify the WiFi connection settings on the CHACON 34895 intercom?

Question

Accepted Answer

To modify the WiFi connection settings of your CHACON 34895 intercom, follow these steps:

Important information:

The WiFi connection is optional. It is only necessary to use the mobile application Guarding Vision (available on iOS and Android) and for remote monitoring via your smartphone.
Your CHACON 34895 intercom supports WPA-PSK and WPA2-PSK standards for WiFi encryption, with AES128 security to protect your communications.
If your WiFi network does not appear in the list, check that your Internet box broadcasts the network name (SSID) and that it is located near the device.
The recommended range is about 30 to 50 meters depending on obstacles. The device must receive a proper WiFi signal to connect.
In case of WiFi connection problems, the intercom can continue to operate in local mode (without WiFi) for calls and door opening.
If you change the password of your Internet box, simply repeat these steps by entering the new credentials.

User manual CHACON Intercom : user manuals and guides in PDF