Q: How to set the Atag KD67102A refrigerator to low temperature?

The Atag KD67102A refrigerator is equipped with a manual thermostat with 5 positions that allows you to gradually adjust the temperature of the refrigerator compartment. To switch to Low position (the coldest) , simply press the temperature button until the LED indicator corresponding to the lowest position lights up, indicating the "Low (coldest)" setting. After setting to low temperature: Let the refrigerator run for 4 to 6 hours for the temperature to stabilize properly, especially if the appliance has just been turned on or filled with fresh food Check that the doors close properly and that nothing obstructs the ventilation openings at the back of the appliance Consult the positioning of food: the coldest zone is at the bottom of the refrigerator compartment, ideal for meat and fish The Low setting is suitable for situations requiring maximum preservation (sensitive fresh food, hot climate above 27°C, very full appliance). For regular use, Atag recommends the Medium setting , which offers the best balance between food preservation and energy consumption. Intermediate settings (Medium-high, Medium-low) allow you to adjust the temperature to your specific needs without always resorting to the maximum setting. Important: this refrigerator does not have an electronic thermostat displaying the temperature in degrees Celsius. The setting is done exclusively via the manual button with its 5 predefined levels. The appliance automatically regulates the temperature once the level is selected.

Question 1

How to increase the temperature of the refrigerator?

Accepted Answer

To increase the temperature of the Atag KD63140A refrigerator (make it less cold), use the temperature adjustment button located on the touch control panel. The three LED indicators show the currently selected level.

The appliance has 5 temperature levels available, from warmest to coldest: High (less cold), Medium-High, Medium, Medium-Low, and Low (coldest). The recommended setting is Medium for optimal preservation of fresh food.

Simply press the temperature button to cycle through the different levels. If your food seems too frozen or if you want a less cold temperature, gradually increase to Medium-High or High. Conversely, if you find that the temperature is not cold enough, decrease to Medium-Low or Low.

Important points: the actual temperature inside the refrigerator also depends on the ambient temperature, the frequency of door openings, and the amount of food stored. After each adjustment, wait a few hours for the appliance to stabilize the new temperature before making another change. For recommended storage times according to the selected temperature level, refer to the online user manual provided by Atag.

Question 2

How to set the Atag KD67102A refrigerator to low temperature?

Accepted Answer

The Atag KD67102A refrigerator is equipped with a manual thermostat with 5 positions that allows you to gradually adjust the temperature of the refrigerator compartment. To switch to Low position (the coldest), simply press the temperature button until the LED indicator corresponding to the lowest position lights up, indicating the "Low (coldest)" setting.

After setting to low temperature:

Let the refrigerator run for 4 to 6 hours for the temperature to stabilize properly, especially if the appliance has just been turned on or filled with fresh food
Check that the doors close properly and that nothing obstructs the ventilation openings at the back of the appliance
Consult the positioning of food: the coldest zone is at the bottom of the refrigerator compartment, ideal for meat and fish

The Low setting is suitable for situations requiring maximum preservation (sensitive fresh food, hot climate above 27°C, very full appliance). For regular use, Atag recommends the Medium setting, which offers the best balance between food preservation and energy consumption. Intermediate settings (Medium-high, Medium-low) allow you to adjust the temperature to your specific needs without always resorting to the maximum setting.

Important: this refrigerator does not have an electronic thermostat displaying the temperature in degrees Celsius. The setting is done exclusively via the manual button with its 5 predefined levels. The appliance automatically regulates the temperature once the level is selected.

User manual Atag Fridge : user manuals and guides in PDF

Models Atag Fridge most viewed

Other categories Atag

Recent questions about Fridge Atag