KA2011DL - Fridge Atag - Free user manual and instructions
Find the device manual for free KA2011DL Atag in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Refrigerator |
| Brand | Atag |
| Model | KA2011DL |
| Energy class | A+ |
| Total net capacity | approximately 200 L |
| Refrigerator capacity | approximately 170 L |
| Freezer capacity | approximately 30 L |
| Dimensions (H x W x D) | 85 x 60 x 65 cm |
| Net weight | approximately 50 kg |
| Power supply | 220-240 V, 50 Hz |
| Climate class | N-ST |
| Cooling type | Ventilated (No Frost) |
| Interior lighting | LED |
| Temperature control | Electronic, digital display |
| Super Cool function | Yes |
| Open door alarm | Yes |
| Installation type | Built-in or freestanding |
| Reversible doors | Yes |
| Maintenance and cleaning | Automatic defrost, interior cleaning with a soft cloth |
| Spare parts and repairability | Available via Atag after-sales service, repairability index 7.2/10 |
Frequently Asked Questions - KA2011DL Atag
How to adjust the temperature of my Atag KA2011DL refrigerator?
Use the control panel located inside. Press the adjustment button to lower or raise the temperature. The recommended temperature is 4°C for the refrigerator and -18°C for the freezer.
What to do if the open door alarm sounds?
Check that the door is properly closed. If it remains open for more than 2 minutes, the alarm triggers. Close it completely to stop the alarm. If it persists, the sensor may be faulty.
How to defrost the freezer?
This model is equipped with the No Frost system (ventilated cooling). Manual defrosting is not necessary. Defrosting is automatic thanks to a regular heating cycle.
Why does water accumulate at the bottom of the refrigerator?
This may be due to a clogged drain hole. Clean it with a cotton swab or a small brush. Also ensure that food does not block the air circulation.
My refrigerator makes noise, is that normal?
Yes, some noises are normal: compressor hum, refrigerant gurgling, click of the expansion valve. If the noise becomes very loud or irregular, contact after-sales service.
How to change the door opening direction?
Unscrew the hinges and handles. Reverse the hinge brackets to the other side. Refer to the diagram in the manual for the exact steps. You will need a Phillips screwdriver.
What type of lighting is used and how to replace the bulb?
The lighting is integrated LED. It is not user-replaceable. If the LED no longer turns on, contact Atag after-sales service for replacement.
What does error code E1 on the display mean?
Error code E1 indicates a temperature sensor fault. Unplug the device for 5 minutes then plug it back in. If the error persists, call a technician.
How to save energy with this refrigerator?
Place the appliance away from heat sources, leave air circulation space behind, do not open the door unnecessarily, and set the temperature to 4°C. Use the Super Cool function only when adding large quantities of food.
Where to find the rating plate and what to do in case of breakdown?
The rating plate is located inside the refrigerator, on the left or right side wall. Note the serial number before contacting Atag after-sales service at 0 800 000 000. Do not attempt to repair it yourself.
User questions about KA2011DL Atag
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual KA2011DL - Atag and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KA2011DL by Atag.
USER MANUAL KA2011DL Atag
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atag
Model : KA2011DL
Category : Fridge