How to delete stored blood pressure readings on the Tensoval Mobil Classic?

Question

Accepted Answer

Procedure for deleting measurements on the Tensoval Mobil Classic:

To delete all stored readings in a memory, you must first display the average value, then hold down the button until the data is completely erased. Here’s how to proceed.

Press the memory button M1 (to delete memory 1) or M2 (to delete memory 2) to display the average value of the recorded measurements.
Now, keep that same button pressed without releasing it. The values displayed on the screen will start to blink.
Continue to hold the button until only the memory number remains visible on the screen (no values or averages displayed).
Release the button. All measurements from this memory are then deleted.

Important condition: You must have recorded at least 2 measurements in the memory to be able to delete them. If only one measurement is stored, deletion is not possible. You must first record a second measurement before you can proceed with the deletion.

Each memory (M1 and M2) can store up to 30 measurements with automatic average calculation. When this limit is reached, the oldest measurements are automatically replaced by the most recent ones.

User manual Tensoval Blood pressure monitor : user manuals and guides in PDF

Models Tensoval Blood pressure monitor most viewed

Recent questions about Blood pressure monitor Tensoval