How to attach the rear wheels of the GRACO EVO XT stroller?

Question

Accepted Answer

On the GRACO EVO XT stroller, attaching the rear wheels is done in a few simple steps. The rear wheels of the GRACO EVO XT are swivel wheels that attach to the mounting points located on each side of the frame, under the seat of the stroller.

Position the frame on a stable surface with the wheel attachment points clearly visible. Make sure the stroller's brake is engaged to prevent it from moving.
Align the rear wheel with the side support designed for this purpose (there is a support on each side of the frame). The wheel axle should fit directly into the mounting housing.
Push the wheel firmly into the support until you hear a distinct click. This click indicates that the locking mechanism is fully engaged and the wheel is secured.
Check that the attachment is correct by gently trying to remove the wheel: it should not move. The wheel should turn freely without excessive lateral play.
Repeat the operation on the other side of the frame with the second rear wheel. Both wheels should be mounted identically.
Test the stroller by moving it slowly to check that the wheels turn correctly and without abnormal noise. The swivel wheels should turn easily in all directions.

Important: If during assembly you feel unusual resistance or if the click is not heard, check that the wheel axle aligns correctly with the support and is not in contact with other parts of the frame. If difficulties persist, consult the detailed illustrations in the complete 94-page manual available on notice-facile.com or contact GRACO support directly.

User manual GRACO Stroller : user manuals and guides in PDF

Models GRACO Stroller most viewed

Other categories GRACO

Recent questions about Stroller GRACO