Q: How to play music on the MARSHALL Acton III?

The MARSHALL Acton III supports several methods for playing music: Via Bluetooth (wireless) Press the source button to select the Bluetooth source Hold the source button until the LED lights up red (pairing mode) Select "MARSHALL Acton III" from the Bluetooth device list on your phone or tablet Once paired, start playing music from your favorite music app (Spotify, Apple Music, YouTube Music, etc.) Use the control buttons on top of the speaker: the center button for pause/play, the sides to skip to the next or previous song Via cable (wired connections) 3.5 mm AUX input : Connect a standard audio cable to the AUX input on top of the device RCA inputs : Connect RCA cables to the back for devices like a turntable (RIAA amplifier required) HDMI ARC : If your TV is compatible, connect it via the HDMI port at the back The device supports up to two simultaneous Bluetooth connections, although only one device can play at a time. The battery life is approximately 15 hours.

Question 1

How to play music on the MARSHALL Acton III?

Accepted Answer

The MARSHALL Acton III supports several methods for playing music:

Via Bluetooth (wireless)

Press the source button to select the Bluetooth source
Hold the source button until the LED lights up red (pairing mode)
Select "MARSHALL Acton III" from the Bluetooth device list on your phone or tablet
Once paired, start playing music from your favorite music app (Spotify, Apple Music, YouTube Music, etc.)
Use the control buttons on top of the speaker: the center button for pause/play, the sides to skip to the next or previous song

Via cable (wired connections)

3.5 mm AUX input: Connect a standard audio cable to the AUX input on top of the device
RCA inputs: Connect RCA cables to the back for devices like a turntable (RIAA amplifier required)
HDMI ARC: If your TV is compatible, connect it via the HDMI port at the back

The device supports up to two simultaneous Bluetooth connections, although only one device can play at a time. The battery life is approximately 15 hours.

Question 2

Should I leave the Marshall Woburn III speaker on while charging?

Accepted Answer

No, the Marshall Woburn III does not have a battery. It is a wired speaker that must be permanently connected to a power outlet to function. Therefore, there is no concept of 'charging' for this model - the speaker is powered directly by the alternating current via the supplied power cable.

To use your Marshall Woburn III, simply:

Connect the power cable to the dedicated input at the back or side of the speaker
Plug the power plug into a wall outlet compatible with your region's voltage
Use the power switch to turn the speaker on or off as needed

Important: Always ensure that the power cord, plug, and speaker are compatible with your power supply and wall outlet. Before disconnecting the cable from the speaker, always unplug the plug from the wall outlet.

The speaker consumes power only when it is turned on. Therefore, it is recommended to turn it off using the power switch when not in use, but the power cable can remain plugged in permanently without risk.

User manual MARSHALL Loudspeaker : user manuals and guides in PDF

Models MARSHALL Loudspeaker most viewed

Other categories MARSHALL

Recent questions about Loudspeaker MARSHALL