How to activate and use the TWS (stereo pairing) function on the Forever Toob 30 BS-950?

Question

Accepted Answer

The TWS (True Wireless Stereo) function allows you to pair two Forever Toob 30 BS-950 speakers to create a stereo audio setup. This function uses Bluetooth 5.0 to synchronize the two devices and provide two-channel sound reproduction.

Activating and pairing TWS:

Turn on both speakers by pressing and holding the ON/OFF button until the LED/Bluetooth indicator lights up on each
On one of the two speakers, press and hold the Play/Pause button for about 2 seconds until you hear a beep
Release the Play/Pause button. The two speakers will synchronize; this step may take several seconds
On your source device (phone, tablet, computer), enable Bluetooth and search for available devices
Select the speaker named "TooB 30" from the list and confirm the Bluetooth pairing

Once paired in TWS mode, the two Forever Toob 30 BS-950 speakers work together in stereo. Each speaker has two 45 mm drivers for a power of 15 W, creating an immersive audio experience with an expanded soundstage. The Bluetooth range is maintained up to 10 meters.

Disabling TWS mode:

To disable the TWS function, press and hold the Play/Pause button for about 2 seconds on one of the two speakers. A sound signal confirms the disconnection from stereo mode.

Practical recommendations:

Ensure that both speakers are sufficiently charged (Li-Ion battery 3.7 V, 4400 mAh with 3 hours of charging time)
Keep both speakers within 10 meters of each other to ensure stable synchronization
If pairing fails, completely turn off both speakers, wait a few seconds, and then repeat the procedure from the beginning
Once in TWS mode, use your device's music app to control playback, adjust the volume, and navigate between tracks

User manual Forever Speaker : user manuals and guides in PDF

Models Forever Speaker most viewed

Other categories Forever

Recent questions about Speaker Forever