Where are the batteries of the REX BX200 console located and how do I replace them?

Question

Accepted Answer

The REX BX200 exercise bike is equipped with an electronic console powered by 2 AA 1.5V alkaline batteries (not included with the product). These batteries allow the display and all functions of the console to operate.

Location of the batteries: The batteries are located inside the training console, usually accessible from the back or bottom of the console. The assembly manual provided with your bike specifies how to access the battery compartment according to your specific model.

How to replace the batteries:

Stop your workout and ensure the bike is stationary
Locate the battery compartment on the console (usually at the back or underneath)
Open the compartment following the assembly instructions (unscrewing or opening by clip)
Remove the two used batteries and replace them with two new high-quality AA 1.5V batteries
Check the polarity (+ and -) by consulting the indications inside the compartment
Securely close the compartment
Turn on the console by pressing a button or using the bike

Reset after replacement: If the screen remains black or displays nothing after replacing the batteries, press and hold the RESET button for about 4 seconds to reset the console. This action will restore the device's default settings.

Important advice: Never pour liquid on the console, including your sweat. This could damage the electronic circuits. Always use a soft, slightly damp cloth to clean the exterior of the console. For any questions about accessing the battery compartment, please contact customer service at SI-Zweirad-Service GmbH at the number provided in your warranty.

User manual REX Exercise bike : user manuals and guides in PDF

Models REX Exercise bike most viewed

Other categories REX

Recent questions about Exercise bike REX