How to reset the LINKSYS WRT54G router to factory settings?

Q: How to reset the LINKSYS WRT54G router to factory settings?

To reset your LINKSYS WRT54G router to factory settings, follow the steps below: Steps to reset the LINKSYS WRT54G router Locate the Reset button: It is usually found at the back of the router. This button is often recessed and requires a pointed object (like a paperclip) to be pressed. Turn off the router: Although this is not always necessary, it is advisable to turn off the device before starting the procedure. Press and hold the Reset button: Press the button with the pointed object and hold it down. Turn the router back on: While holding the button down, power the router back on. Continue to hold the Reset button: Keep it pressed for about 10 to 15 seconds. You will see the router's lights blink, indicating that the reset is in progress. Release the button: After this time, release the Reset button. Wait for the complete restart: The router will restart with the default factory settings. This process may take a few minutes. After the reset, all custom settings, including the Wi-Fi network name, password, and Internet configurations, will be erased. You will need to reconfigure your router to regain access to the Internet and the wireless network.

Question

Accepted Answer

To reset your LINKSYS WRT54G router to factory settings, follow the steps below:

Steps to reset the LINKSYS WRT54G router

Locate the Reset button: It is usually found at the back of the router. This button is often recessed and requires a pointed object (like a paperclip) to be pressed.
Turn off the router: Although this is not always necessary, it is advisable to turn off the device before starting the procedure.
Press and hold the Reset button: Press the button with the pointed object and hold it down.
Turn the router back on: While holding the button down, power the router back on.
Continue to hold the Reset button: Keep it pressed for about 10 to 15 seconds. You will see the router's lights blink, indicating that the reset is in progress.
Release the button: After this time, release the Reset button.
Wait for the complete restart: The router will restart with the default factory settings. This process may take a few minutes.

After the reset, all custom settings, including the Wi-Fi network name, password, and Internet configurations, will be erased. You will need to reconfigure your router to regain access to the Internet and the wireless network.

User manual LINKSYS Router : user manuals and guides in PDF

Models LINKSYS Router most viewed

Other categories LINKSYS

Recent questions about Router LINKSYS