How to check and control the odometer cable of the Yamaha YBR125 motorcycle?

Question

Accepted Answer

The odometer cable of the Yamaha YBR125 is an essential component that transmits the rotation of the wheel to the speedometer. To check its proper functioning, here are the steps to follow:

1. Locating the odometer cable

The odometer cable is generally located on the right side of the motorcycle, connected between the front wheel and the speedometer on the dashboard.

2. Visual inspection

Check that the cable is not damaged, frayed, or cut.
Ensure that the protective sleeves are not cracked or worn.
Make sure that the connections at the ends (wheel and speedometer) are securely attached and free of corrosion.

3. Functionality test

Start the motorcycle and ride at a moderate speed.
Observe the speedometer: the needle or display should move according to the speed.
If the speedometer does not respond, this may indicate a faulty or disconnected cable.

4. Mechanical check

Disconnect the cable from the speedometer and manually turn the part connected to the wheel.
You should feel a smooth rotation without blockage or excessive resistance.
If the cable is stiff or stuck, it will need to be replaced.

5. Replacement if necessary

In case of a damaged or non-functional cable, it is recommended to replace it with a new cable compatible with the Yamaha YBR125 to ensure accurate speed and mileage readings.

These simple checks will help you maintain the proper functioning of your motorcycle's speedometer.

User manual YAMAHA Motorcycle : user manuals and guides in PDF

Models YAMAHA Motorcycle most viewed

Other categories YAMAHA

Recent questions about Motorcycle YAMAHA