How to access and remove the rotor from the Ferplast Blumodular 3?

Question

Accepted Answer

To access the rotor of the Blumodular 3, follow these steps:

Removal Procedure

Unplug the pump from the power supply
Remove the BLUMODULAR from the aquatic tank
Press the two side buttons on the lid to open it
Extract the rotor by removing it from the pump body

Important Precautions

Before any intervention, ensure that all electrical devices are unplugged from the network. Use a soft brush only to clean the rotor - no chemical detergent. After maintenance, check that the locking devices are correctly positioned before reinstallation.

It is recommended to inspect and clean the pump every 6 months to eliminate limescale deposits or impurities.

User manual Ferplast Pet accessory : user manuals and guides in PDF

Models Ferplast Pet accessory most viewed

Other categories Ferplast

Recent questions about Pet accessory Ferplast