How to clean the carburetor of the Graphite 52G670 lawn mower?

Question

Accepted Answer

The PDF of this manual does not contain a detailed procedure for cleaning the carburetor. However, here is some useful information:

Carburetor of your lawn mower

Your Graphite 52G670 lawn mower is equipped with a carburetor model DY1P52F, suitable for the 4-stroke engine of 79 cm³. Cleaning the carburetor is an important maintenance operation if the mower has difficulty starting or runs irregularly.

When to clean the carburetor?

After prolonged winter storage or inactivity for several months
If the device does not start or shuts off immediately after starting
If you notice misfires or a loss of power
If the gasoline used has been in the tank too long

General steps (to be adapted according to your model)

Stop the engine and let it cool completely
Drain the gasoline tank or use a siphon pump
Locate the carburetor near the engine
Unscrew the mounting screws and carefully remove the carburetor
Clean the internal passages with a carburetor cleaning spray
Check the gaskets and replace them if they are damaged
Reassemble the carburetor and fill the tank with unleaded 95 gasoline

Important: This manual does not provide the specific disassembly diagram for the DY1P52F model. For safe intervention, consult an authorized Graphite dealer or a repair shop specialized in small thermal engines if you are not comfortable with this operation.

User manual Graphite Lawn mower : user manuals and guides in PDF

Models Graphite Lawn mower most viewed

Other categories Graphite

Recent questions about Lawn mower Graphite