How to update the firmware on a Marantz UD5007 Blu-ray player?

Question

Accepted Answer

To update the firmware of your Marantz UD5007 Blu-ray player, your device must first be connected to the Internet via an Ethernet cable or a DHCP network connection. Once the connection is established, press the SETUP button on the remote control to access the setup menu.

In the SETUP menu, select General Settings using the navigation arrows, then press ENTER. You will access a submenu containing several options. Look for and select Software Update.

Once in this menu, select Check for Update to see if a new version of the firmware is available. The TV screen will display the approximate time needed to download and install the update. If a new version is available, press ENTER to start the process.

When the update starts, a progress bar and the remaining time will be displayed on the TV screen. Do not turn off the device during the update process, as this could damage the system. Let the player run until the operation is complete.

Once the update is finished, the Marantz UD5007 Blu-ray player will automatically restart and return to its normal state. You will then be able to use your device with the latest version of the firmware. If you wish to be automatically notified of future available updates, you can enable the Update Notification option in the same General Settings menu.

User manual MARANTZ Blu-ray player : user manuals and guides in PDF

Models MARANTZ Blu-ray player most viewed

Other categories MARANTZ

Recent questions about Blu-ray player MARANTZ