Q: Where are the sensors of the KRESS Mission Nano 600 KR101E robotic mower located and what are they for?

The KRESS Mission Nano 600 KR101E is equipped with four main sensors that ensure the proper functioning and safety of the mower: Rain sensor (pluviometric) - Detects rain conditions and automatically commands the robot to return to the base station to protect the electrical components. Lifting sensor - Immediately stops the device as soon as it is lifted, for safety reasons. Blocking sensor - Detects if the cutting disc or wheels are blocked by an obstacle and adjusts the robot's behavior accordingly. Tilting sensor - Identifies if the device is tilted or overturned and triggers the safety stop. The PDF of this manual does not provide a detailed diagram indicating the exact location of each sensor on the chassis. However, to keep these sensors in good condition, regularly clean the contact pins and the charging strip to ensure a good connection. Obstructed or dirty sensors may generate error codes (notably error E1).

Q: Is there a USB port on the KRESS Mission Mega 3000 KR133E?

No, this robotic mower is not equipped with a USB port. The KRESS Mission Mega 3000 KR133E operates entirely autonomously. The mower recharges via its automatic charging station : Full recharge time: approximately 60 minutes The mower returns to the charging station by itself A green light flashes during charging Battery and power supply: 20V Lithium-ion battery, 3000 mAh Charger: KA3717/KA3817 (28V, 7.0A) Control and updates: The mower is fully managed via the dedicated mobile app (Wi-Fi and Bluetooth). Firmware updates are done wirelessly (OTA) directly from the app, without requiring a USB connection. Programming is done with a 4-digit PIN code.

Q: What does the error code E1 mean on the KRESS Mission Nano 600 KR101E robotic mower when the light is green, and how can it be resolved?

The error code E1 displayed on your KRESS Mission Nano 600 KR101E robotic mower generally indicates a problem related to the sensors, particularly those detecting obstacles or the boundaries of the terrain, even if the light is green. Meaning of the E1 code This code signals that the mower is encountering an anomaly in detecting its environment, which may be due to: Obstructed or dirty sensors Poor positioning or malfunctioning of the sensors Interferences or obstacles not detected correctly How to resolve the E1 issue? Clean the sensors: Inspect all the sensors of the mower and remove any dirt, dust, grass, or debris that may hinder their operation. Use a soft, dry cloth to gently clean them. Check the installation: Ensure that the mower is correctly positioned on the terrain and that the sensors are not damaged or misaligned. Restart: Turn off the mower, wait about a minute, then turn it back on to reset the internal systems. Check the terrain: Ensure that the mower's path is clear and that the boundary wires are properly positioned and intact. Software update: If your model allows it, check for the availability of a software update and install it to fix any potential bugs. If after these checks and actions the error code persists, it is advisable to contact a specialized technical service for a thorough diagnosis.

Question 1

What is the 'demo' message that appears on my KRESS Mission 1000 KR121E mower and how do I activate it?

Accepted Answer

The 'demo' message is not documented in the official manual of the KRESS Mission 1000 KR121E. However, on this type of robotic mower, this message generally indicates that the device is in demonstration or initialization mode.

This mode may appear for one of the following reasons:

First power-up - The mower must be properly activated via the 4-digit PIN code and the START button
Test mode before actual use - Some manufacturers enable this mode by default until the first complete use
Insufficiently charged battery - If the charge is low, the display may switch to limited mode
Peripheral cable not configured - Check that the cable is properly connected and powered

To exit demo mode: Fully charge the battery (about 160 minutes) and ensure that the peripheral cable is properly connected and powered. Then press the ON/OFF button, enter your 4-digit PIN code, and start mowing with START.

If the message persists, contact KRESS support providing the exact model (Mission 1000 KR121E) and a photo of the screen with the message.

Question 2

How can I tell if the blades of the KRESS Mission 1000 KR121E are worn and when to replace them?

Accepted Answer

The blades of the KRESS Mission 1000 KR121E should be checked regularly for any signs of wear:

Signs of wear to watch for

Chips or visible damage - Regularly inspect the blades for any defects or breaks
Loss of cutting efficiency - If the lawn mower is no longer cutting properly, the blades may be dull

Replacement frequency

According to the documentation:

Reverse the blades every month to extend their lifespan
Replace the blades every 2 months with regular use

With the KRESS Mission 1000 KR121E equipment, the lifespan is about 3 times longer than other brands in daily use.

Important point

Always replace ALL blades at the same time to ensure the correct balance of the rotating disc. Always use new screws during installation.

Question 3

What does error code E6 mean on the KRESS Mission Nano 600 KR101E robotic mower and how can it be resolved?

Accepted Answer

The error code E6 is not documented in the official manual of the KRESS Mission Nano 600 KR101E mower. The available technical manual mentions the following error codes:

E1: "Out of bounds" - problem detecting the cutting boundary
E2: "Wheels blocked" - obstruction of the wheels
E3: "Cutting disk blocked" - blade or cutting disk obstructed

If your mower displays E6, we recommend:

Check that the mower is properly updated via the Kress Mission mobile app (Bluetooth and 2.4 GHz Wi-Fi access)
Contact official KRESS technical support, which can provide you with more comprehensive documentation or an updated version of the manual including this error code
In the meantime, apply basic troubleshooting steps: restart the device, check that no debris is blocking the sensors or wheels, and ensure that the boundary wire is correctly positioned

Question 4

Where is the battery of the KRESS Mission Nano 600 KR101E robotic mower located?

Accepted Answer

The battery of the KRESS Mission Nano 600 KR101E robotic mower is located on the bottom side of the device. To access it:

Turn the robotic mower upside down
Remove the battery cover located on the underside
You can then remove the battery

Your mower is equipped with a battery model KA3022 with a capacity of 20V Max. The voltage and power information is engraved on this battery.

Question 5

How to charge the KRESS Mission Nano 600 KR101E robotic mower after a complete discharge if it does not resume charging on the base?

Accepted Answer

If your KRESS Mission Nano 600 KR101E robotic mower does not resume charging after a complete discharge, the problem usually stems from a poor contact between the battery and the base. Here’s how to diagnose and resolve:

Troubleshooting Steps

Clean the charging contacts: The charging contacts (the contact strip of the robot and the pins of the base) can get dirty with dust and moisture. Gently wipe the contact strip of the robot and the pins of the base with a dry, clean cloth. This is the most common cause of this issue.
Check the power supply of the base: Ensure that the charging base is properly plugged in. The LED indicator of the base should be lit. If not, check the power supply and the cable.
Manually reposition the robot: After cleaning the contacts, manually place the robot on the docking station, ensuring it is well-centered and properly touching the charging pins.
Wait for charging to start: The KA3022 lithium-ion battery (20V Max) should begin charging quickly. The full charging time is approximately 105 minutes.

Important: Regular cleaning of the contacts (charging strip and pins) is essential to ensure a good connection. If after these steps the robot still does not charge, consult KRESS technical support, as the battery or charging circuit may be defective.

Question 6

Where are the sensors of the KRESS Mission Nano 600 KR101E robotic mower located and what are they for?

Accepted Answer

The KRESS Mission Nano 600 KR101E is equipped with four main sensors that ensure the proper functioning and safety of the mower:

Rain sensor (pluviometric) - Detects rain conditions and automatically commands the robot to return to the base station to protect the electrical components.
Lifting sensor - Immediately stops the device as soon as it is lifted, for safety reasons.
Blocking sensor - Detects if the cutting disc or wheels are blocked by an obstacle and adjusts the robot's behavior accordingly.
Tilting sensor - Identifies if the device is tilted or overturned and triggers the safety stop.

The PDF of this manual does not provide a detailed diagram indicating the exact location of each sensor on the chassis. However, to keep these sensors in good condition, regularly clean the contact pins and the charging strip to ensure a good connection. Obstructed or dirty sensors may generate error codes (notably error E1).

Question 7

How to replace the rear wheels of the KRESS Mission Mega 6000?

Accepted Answer

The manual for the Kress Mission Mega 6000 KR136E does not provide instructions for replacing the rear drive wheels, indicating that this intervention falls under professional after-sales service. Unlike the blades (which are expressly designed to be replaced by the user every 2 months), the drive wheels are integrated components that require specialized tools and technical expertise.

If one of your rear wheels shows signs of wear, slipping, or motor malfunction, we recommend contacting a Kress dealer or authorized service center directly with your model (KR136E). The technical service will have original Kress parts and can replace the wheel correctly while checking the alignment and balance of the robot.

While waiting for a repair, you can check the condition of your wheels by gently turning the robot upside down (with the power unplugged) and inspecting the rear drive wheels located under the chassis. Clean them with water and a soft brush to remove grass and accumulated debris, which can sometimes restore partial traction. Also, ensure that the wheel disc is not blocked and turns freely.

To facilitate your process, note your model number KR136E and the purchase date of the robot. The authorized service center will then be able to assess whether the replacement is covered by your Kress warranty (usually 2 years) or if it is a paid repair due to normal wear.

Question 8

Is there a USB port on the KRESS Mission Mega 3000 KR133E?

Accepted Answer

No, this robotic mower is not equipped with a USB port. The KRESS Mission Mega 3000 KR133E operates entirely autonomously.

The mower recharges via its automatic charging station:

Full recharge time: approximately 60 minutes
The mower returns to the charging station by itself
A green light flashes during charging

Battery and power supply:

20V Lithium-ion battery, 3000 mAh
Charger: KA3717/KA3817 (28V, 7.0A)

Control and updates: The mower is fully managed via the dedicated mobile app (Wi-Fi and Bluetooth). Firmware updates are done wirelessly (OTA) directly from the app, without requiring a USB connection. Programming is done with a 4-digit PIN code.

Question 9

What does the error code E1 mean on the KRESS Mission Nano 600 KR101E robotic mower when the light is green, and how can it be resolved?

Accepted Answer

The error code E1 displayed on your KRESS Mission Nano 600 KR101E robotic mower generally indicates a problem related to the sensors, particularly those detecting obstacles or the boundaries of the terrain, even if the light is green.

Meaning of the E1 code

This code signals that the mower is encountering an anomaly in detecting its environment, which may be due to:

Obstructed or dirty sensors
Poor positioning or malfunctioning of the sensors
Interferences or obstacles not detected correctly

How to resolve the E1 issue?

Clean the sensors: Inspect all the sensors of the mower and remove any dirt, dust, grass, or debris that may hinder their operation. Use a soft, dry cloth to gently clean them.
Check the installation: Ensure that the mower is correctly positioned on the terrain and that the sensors are not damaged or misaligned.
Restart: Turn off the mower, wait about a minute, then turn it back on to reset the internal systems.
Check the terrain: Ensure that the mower's path is clear and that the boundary wires are properly positioned and intact.
Software update: If your model allows it, check for the availability of a software update and install it to fix any potential bugs.

If after these checks and actions the error code persists, it is advisable to contact a specialized technical service for a thorough diagnosis.

Question 10

How to change the PIN code on the KRESS Mission Nano 600 KR101E lawn mower robot?

Accepted Answer

Changing the PIN code on your KRESS Mission Nano 600 KR101E:

The four-digit PIN code for your lawn mower robot is initially set during the first startup of the device. To modify or change this PIN code later, you need to use the Kress Mission mobile app, which is compatible with your robot.

Procedure to change the PIN code via the app:

Download and install the Kress Mission app on your smartphone (available on Android and iOS)
Log in to your Kress account in the app
Pair your KRESS Mission Nano 600 with the app if you haven't done so already
Go to the Settings or Security section in the app
Look for the PIN Code or Change PIN Code option
Enter your current PIN code for verification
Enter your new four-digit PIN code
Confirm the new PIN code

Your new PIN code will then be activated immediately. This code will now be required every time you start your lawn mower robot. Choose a code that is easy to remember but hard to guess to secure your device.

If you cannot find the option to change the PIN code in the app, consult the built-in help of the Kress Mission app or contact Kress customer service for specific assistance.

User manual KRESS Robot mower : user manuals and guides in PDF

Models KRESS Robot mower most viewed

Other categories KRESS

Recent questions about Robot mower KRESS