How to program the automatic watering of the FLORABEST HG00549 for 5 AM - 6 AM?

Question

Accepted Answer

To program your FLORABEST HG00549 to water every morning from 5 AM to 6 AM, follow these steps:

Enter programming mode - Press and hold the M button for about 2 seconds.
Set the start time (watering 1) - Use the adjustment button to set 05:00 (5 AM), then confirm by pressing M.
Set the duration - Adjust the adjustment button to 1:00 (1 hour), which will water from 5 AM to 6 AM. Press M to confirm.
Watering 2 (optional) - If you only want one session, press and hold M to skip this option.
Set the watering interval - Set to 1 for daily watering, then confirm with M.
Activate standby - Press M one last time to enter standby mode and activate automatic watering.

Important tip: The device retains all your settings after 1 minute of inactivity. You can modify these settings at any time by repeating the procedure.

User manual FLORABEST Automatic watering : user manuals and guides in PDF

Models FLORABEST Automatic watering most viewed

Other categories FLORABEST

Recent questions about Automatic watering FLORABEST