What is the distance between the wall mounts of the ACOVA 1000 + 1000W MADRAS AIR electric towel dryer?

Question

Accepted Answer

The distance between the wall mounts of the ACOVA 1000 + 1000W MADRAS AIR electric towel dryer is approximately 600 mm (60 cm) horizontally. This is the precise distance you need to maintain between the two anchor points to properly secure the device to the wall.

This 600 mm gap ensures good stability and optimal support for the radiator. It corresponds to the structural reinforcement points of the device. You should measure this distance before drilling holes for the wall plugs.

For a secure installation, ensure that your wall has sufficient load-bearing capacity to support the weight of the radiator filled with thermal fluid. The type of mounting depends on the nature of your wall: use appropriate plugs for plaster, brick, or concrete. We recommend using the hardware provided by ACOVA or fixings specifically compatible with your type of wall.

Once the fixings are in place, check that the radiator is square and perfectly stable before commissioning. Also, remember to respect the recommended vertical distances: the bottom of the device should be positioned at at least 15 cm from the floor for safe use.

User manual ACOVA Electric towel warmer : user manuals and guides in PDF

Models ACOVA Electric towel warmer most viewed

Other categories ACOVA

Recent questions about Electric towel warmer ACOVA