What does the '5 min' indicator mean on the JBSYSTEMS LIGHT CMX-24 light controller?

Q: What does the '5 min' indicator mean on the JBSYSTEMS LIGHT CMX-24 light controller?

The [5 min] indicator above the SPEED fader on the JBSYSTEMS LIGHT CMX-24 controller indicates that the speed fader is set to operate within a range of 0 to 5 minutes. This light indicator allows you to quickly know which time range you will use to control the speed of the effects (chases, transitions between scenes). The CMX-24 offers two possible speed ranges: 5 minute range: by pressing RECORD/SHIFT + 5 + 5 + 5, the [5 min] indicator lights up. The SPEED fader will allow you to vary the speed from 0 to 5 minutes. 10 minute range: by pressing RECORD/SHIFT + 10 + 10 + 10, the [5 min] indicator turns off and the SPEED fader will allow you to vary the speed up to 10 minutes. Once the 5 minute range is set and the indicator is on, simply move the SPEED fader up or down to adjust the speed of your light effects according to this range. For example, in chase mode, the speed of the transition between scenes will be controlled according to this 5 minute range. You can switch between the two ranges at any time as needed: choose the 5 minute range for quick movements and short variations, or the 10 minute range for slower transitions and more gradual effects.

Question

Accepted Answer

The [5 min] indicator above the SPEED fader on the JBSYSTEMS LIGHT CMX-24 controller indicates that the speed fader is set to operate within a range of 0 to 5 minutes. This light indicator allows you to quickly know which time range you will use to control the speed of the effects (chases, transitions between scenes).

The CMX-24 offers two possible speed ranges:

5 minute range: by pressing RECORD/SHIFT + 5 + 5 + 5, the [5 min] indicator lights up. The SPEED fader will allow you to vary the speed from 0 to 5 minutes.
10 minute range: by pressing RECORD/SHIFT + 10 + 10 + 10, the [5 min] indicator turns off and the SPEED fader will allow you to vary the speed up to 10 minutes.

Once the 5 minute range is set and the indicator is on, simply move the SPEED fader up or down to adjust the speed of your light effects according to this range. For example, in chase mode, the speed of the transition between scenes will be controlled according to this 5 minute range.

You can switch between the two ranges at any time as needed: choose the 5 minute range for quick movements and short variations, or the 10 minute range for slower transitions and more gradual effects.

User manual JBSYSTEMS LIGHT Light Controller : user manuals and guides in PDF

Models JBSYSTEMS LIGHT Light Controller most viewed

Other categories JBSYSTEMS LIGHT

Recent questions about Light Controller JBSYSTEMS LIGHT