IS-533 - Styler Scarlett - Free user manual and instructions

Product Type	Hair Brush Dryer / Styler
Brand	Scarlett
Model	IS-533
Input Voltage	220-240 V ~ 50/60 Hz (typical)
Power Consumption	1000 W (estimated)
Air Stream Speeds	2 speeds (medium, high) + cool shot
Heat Settings	Adjustable (low/high) with cool shot
Ionic Function	Yes - neutralizes static, adds shine
Rotating Brush	Yes (left/right rotation for curling)
Attachments Included	Rotating ceramic brush barrel, round brush, air nozzles
Brush Type	Ceramic barrel with bristles
Filter	Removable back filter
Storage	Storage bag included
Safety Features	Automatic shut-off (not specified), overheat protection (assumed), RCD recommended for bathroom use
Cleaning	Remove hair from rotating head and brush with comb; wipe surfaces with dry/damp cloth
Care Instructions	Do not immerse in water; unplug when not in use; let cool before storage

Frequently Asked Questions - IS-533 Scarlett

How do I use the rotating brush to curl my hair?

Start by combing a lock of hair and sliding the brush from roots to ends without rotating. Then press the rotation knob (left or right depending on desired curl direction) while the brush is at the ends, and spin the hair onto the brush. Hold for a few seconds and use the cool shot to set the style.

What is the ionic function for?

The ionic function neutralizes static electricity, reduces frizz, and adds glossy shine and smoothness to hair. It also makes combing easier and enhances the effect of hair care products.

How do I clean the brush and remove tangled hair?

Unplug and let the device cool. Use a comb to remove hair from the rotating head and brush. Wipe plastic and ceramic surfaces with a dry or slightly damp cloth. Do not use abrasives.

Can I use this styler in the bathroom?

Yes, but with caution. Always unplug after use, as water proximity is dangerous even when switched off. For additional safety, install a residual current device (RCD) rated ≤30 mA in the bathroom circuit.

What attachments are included with the IS-533?

The package includes a rotating ceramic brush barrel, a round brush for small curls, air nozzles, and a storage bag. All attachments are removable.

How do I fix my hairstyle with the cool shot?

After styling a lock with the rotating brush, press the cool shot button without rotating the barrel. This releases cool air to set the curl and helps the hairstyle last longer.

How do I remove an attachment?

Simultaneously press the attachment removal knobs on the body and pull the attachment away. Ensure the device is off and unplugged before changing attachments.

Is it safe to use on wet hair?

Yes, but hair should be slightly wet, not dripping. It is recommended to dry hair partially with the brush dryer without accessories first. Do not use on tangled or backcombed hair.

How should I store the styler?

Let the device cool completely. Remove the rotating head and place it in the storage bag to prevent bristle deformation. Do not wrap the cord around the handle. Store in a cool, dry place.

What should I do if the appliance malfunctions?

Do not attempt to repair yourself. Unplug the device and contact the nearest service center. Repairs should only be carried out by qualified personnel.

USER MANUAL IS-533 Scarlett

A faint curved white line against a deep blue gradient background, resembling a stylized airplane or cloud trail (no text or symbols visible)

SCARLETT™

INDIGO

INNOVATION

SELECTION

PERFECT

PROGRESSIVE

TECHNOLOGY

MODERNFASHIONSTYLE

Illustration of a vintage Indigo hair dryer with black bristles and purple control buttons (no text or symbols on body)

Simple line drawing of a twisted cylindrical object with a labeled dimension (11), no text or symbols present.

Illustration of a person styling hair with a brush (no text or symbols)

Illustration of a hand holding a tool with a red arrow indicating force or movement (no text or symbols)

Anatomical illustration of a human shoulder joint with a highlighted surgical device (no text or labels)

Line drawing of a person's shoulder with a red arrow indicating motion or force (no text or symbols)

Illustration of a person holding a mechanical device with red arrows indicating motion (no text or symbols)

Гарантийный талон

North Ridge, Grand Turks, Great Britain, a/ra 127

Мандара, Норс Ридж, Гранд Туркс,

Великобритания

PIs add month and year of production e.g. 08.2010 at this place

1. Handle
2. Attachment removal knobs
3. Attachment rotation knobs
4. Speed and heat switch
5. Removable back filter
6. Cord twisting protector
7. Air nozzles
8. Rotating ceramic brush barrel
9. Round brush
10. IONIC LED
11. Storage bag

UA ОПИС

• Please read this instruction manual carefully before use and keep in a safe place for future reference.
• Before the first connecting of the appliance check that voltage indicated on the unite corresponds to the mains voltage in your home.
• For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
• Do not use outdoors.
• Always unplug the appliance from the power supply before cleaning and when not in use.
• To prevent risk of electric shock, do not immerse the appliance in water or in any other liquids.
• If the appliance is used in a bathroom, it should always be unplugged after use, because nearness of water is dangerous even if the appliance is switched off.
• For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not leave the appliance switched on when you do not use it.
• Do not use other attachments than those supplied.

• Do not operate after malfunction or cord damage.

• Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.

• To protect against the risk of burn, do not touch detachable plates.
• CAUTION:
• The appliance is very hot when in use; please, be careful.
• Please, dry hair before use.
• If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on.
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
• CAUTION:
• Be careful, the device attachment very hot during operation.

ATTENTION: Do not use the device beside the bathrooms, swimming pools and other vessels containing water.

2.RECOMMENDATIONS

• Dry your hair slightly with the brush dryer without accessories; hair should remain slightly wet.
• It is not allowed to use drying brush with rotating brush for styling tangled, backcombed hair or chignons.
• Comb your hair thoroughly and split it into small locks. Style the locks in turns. Use hair clips to separate the locks.
• An intense hot air flow will give your air the desired shape in no time as you style it. You can adjust the flow

speed and the air temperature in accordance with your hair type and preferences.

3. OPERATION

• Untwist the power cord completely.
• Fasten an attachment to the body till it clicks.
• To remove the attachment, simultaneously press the removal knobs on the body and pull the attachment.
• Connect the appliance to a power source.
• Select air stream with the help of the stream switch.

3.1 AIR STREAM SPEED

• You hair brush dryer is equipped with an air stream switch:
  • 0 - the appliance is off;
• • medium air stream speed for soft hair drying or styling;
    • high air stream speed for fast drying.
• -Cool shot. Use this setting at the end of hair straightening or styling to fix each lock style and save your hair style for a long time.

3.2 IONIC FUNCTION

- The IONIC feature neutralizes static charges and at the same time enhances the effect of hair care products. The ionic technology makes hair combing easier and adds it glossy shine and smoothness.

3.3 ATTACHMENT ROTATION KNOBS

• This function is designed to spin the locks on the brush automatically making hair styling much easier.
• To activate spinning, press the rotation knob to the left or to the right depending on the chosen curling direction.
• Keep the knob pressed during spinning.
  • To stop spinning, release the knob.

3.4 ROTATING CERAMIC BRUSH BARREL

• To prepare a lock and comb it thoroughly, start from the roots and smooth it with the appliance once or twice. The appliance must be switched to high heat mode, the brush not rotating (1).
• Lift up the lock at the right angle of 90^ against your head so as not to tangle the rest of the hair(2).
• Slide the rotating brush down the lock not letting it spin on the brush; repeat this step several times by sliding the brush from the roots of the lock towards the end(3).
• Complete the step by spinning the lock onto the brush: proceed from the hair ends towards the roots; wait for some seconds without changing the handle position so that the lock heats well and takes the necessary form and the hair lifts at the roots(4).
• You may want to repeat the process depending on your hair type. Do not forget about the cool shot at the end to fix the lock style. Just press the COOL SHOT knob without rotating the barrel.
• To style your hair with the ends outwards, place the brush at the ends of the hair above the lock and press the outwards spinning knob (5).
• To style your hair with the ends inwards, place the brush at the ends of the hair below the lock and press the inwards spinning knob (6).

3.5 ROUND BRUSH

• This kind of brush is used to make small curls.
- Comb the lock and slide the brush along it from roots to ends.
- Sliding the brush, spin the hair around it. Proceed from hair ends.
- The your hair length permits it make a complete spin moving the brush upwards close to the lock roots.

GB

INSTRUCTION MANUAL

• Hold the brush in this position for some time to heat the lock thoroughly and give it the necessary form. This will volume your hair and lift it at roots.
• You may want to repeat the process depending on your hair type.
• Complete the process with a cool shot to fix the style.
• Always disconnect the hair brush dryer from the power source when finished. Prior to storage let the appliance cool down for some minutes.

4.CLEANING AND CARE

• Prior to cleaning the appliance, disconnect it from the power source and let it cool down completely.
• Do not use abrasives to clean the appliance.
• It is recommended to clean the rotating head and the brush regularly to avoid accumulation of hair, hair styling products, etc.
• Using a comb, remove hair left on the rotating head and small brush. Wipe the plastic and ceramic surfaces carefully with a dry or damp tissue.

5. STORAGE

• Attention! Upon using the rotating head, do not put the appliance on a surface without removing the head first. If you do it may damage the brush and cause bristles deformation. Put the brush into a special case.
• Let the brush dryer cool down completely; make sure the handle is not wet.
• Not to damage the power cord never twist it on the handle.
• Keep the appliance in a cool dry place.