TN12-04 - Subwoofer MTX Audio - Free user manual and instructions

Product Type	Car Audio Subwoofer
Brand	MTX Audio
Model	TN12-04
Size	12 inches (305 mm)
Impedance	4 Ohms
Power Handling (RMS)	300 Watts
Power Handling (Peak)	600 Watts
Frequency Response	25 Hz - 400 Hz
Sensitivity	87 dB
Mounting Depth	6.5 inches (165 mm)
Mounting Hole Diameter	11 inches (280 mm)
Sealed Enclosure Volume	1.0 cubic feet (28.3 liters)
Ported Enclosure Volume	1.5 cubic feet (42.5 liters)
Voice Coil	Single 4-Ohm
Cone Material	Injected Polypropylene
Surround Material	Rubber
Basket Material	Stamped Steel
Weight	10.5 lbs (4.8 kg)
Recommended Amplifier Power	150 - 400 Watts RMS
Maintenance	Clean with dry cloth; avoid moisture
Safety	Use in proper enclosure; avoid over-powering
Warranty	1 Year Limited

Frequently Asked Questions - TN12-04 MTX Audio

What is the impedance of the MTX Audio TN12-04 subwoofer?

The MTX Audio TN12-04 subwoofer has a single 4-Ohm voice coil, providing a 4-Ohm impedance.

What is the recommended enclosure volume for a sealed box?

For a sealed enclosure, the recommended volume is 1.0 cubic feet (28.3 liters).

What is the recommended enclosure volume for a ported box?

For a ported enclosure, the recommended volume is 1.5 cubic feet (42.5 liters).

What amplifier power should I use with this subwoofer?

A recommended amplifier power range is 150 to 400 Watts RMS at 4 Ohms.

What is the mounting depth of the TN12-04?

The mounting depth is 6.5 inches (165 mm).

Does the subwoofer require a break-in period?

Yes, it is recommended to break in the subwoofer for 10-20 hours at moderate volume to loosen the suspension.

Can I wire two TN12-04 subwoofers to a 2-Ohm load?

No, because each subwoofer is 4 Ohms, wiring two in parallel results in a 2-Ohm load, but ensure your amplifier is stable at 2 Ohms.

What type of music is this subwoofer best for?

The TN12-04 is versatile and works well for various genres, especially bass-heavy music like hip-hop, EDM, and rock.

How do I clean the subwoofer?

Use a soft, dry cloth to gently wipe the cone and surround. Avoid liquids or harsh chemicals.

What is the warranty on the MTX Audio TN12-04?

MTX Audio offers a 1-year limited warranty against defects in materials and workmanship.

USER MANUAL TN12-04 MTX Audio

A 4Ω speaker will represent a 4Ω load.

A 4Ω speaker will represent a 1Ω load.

graph TD
    A["AMP"] --> B["Output Stage ④"]
    A --> C["Output Stage ④"]
    B --> D["Feedback Loop"]
    C --> D
    D --> E["Output Stage ⑤"]

A 4Ω speaker will represent a 2Ω load.

A 4Ω speaker will represent a 1.3Ω load.

MTX products purchased in the USA from an authorized MTX dealer are guaranteed against defects in material and workmanship for a period of 1 year, the warranty period begins the day the product is purchased by the wind user. This warranty is limited to the original retail purchaser of product. Product found to be defective during that period will be repaired or replaced by MTX at no charge. This warranty is sold if it is determined that unauthorized parties have attempted repairs or alterations of any nature. Warranty does not extend to cosmetics or finish. Before presuming a defect in present in the product, be certain that all related equipment and wiring is functioning properly. MTX disclaims any liability for other incurred damages resulting from product defects. Any expense in the removal or reinstallation or products are not covered by this warranty. MTX's total liability will not exceed the purchase price of the product. If a defect is present, your authorized MTX dealer may be able to effect repairs.

Proof of purchase is required when requesting service, so please retain your sales receipt, and take a moment to register your product on line at MTX.com. Also, a Return Authorization number (RA) is required before shipping product back to MTX, call 800-556-2888 or 906-328-5565 for speaker RA's.

mtx audio

Parameters

Los parámetros, Paramètres, Paramator

F_a : 32.4 Hz

Q_ms : 4.54

C_ms:0.178 mm / N

Mme:138.08 g

R... 8.84 kols

V_op : 2.573 ft (72.85 liters)

X_{max}: 0.370 in (9.40 mm)

D: 10.315 in (262 mm)

s. 83.57 in² (539.13 cm²)

V. 30.84 in³ (0.51 liters)

0.82

8.3260

10.425

B: 10.46 mm

Line drawing of a speaker with concentric rings and a logo on the front wheel (no text or symbols present)

Specifications

Las especificaciones. Specifications. Specialisationen

Recommended Power Rating of 100 - 200 Watts RMS

La Potencia nominal recomendada, Le Pouvoir recommandé Evaluant, Empfohlene Kraft Einzu

THUNDER"·JACKHAMMER"·AXE·SLEDGEHAMMER"·THUNDERFORM"

AMPLIFIERS · SUBWOOFERS · SPEAKERS · ENCLOSURES · MARINE

21A9436

mtx audio

Sealed Enclosure

For the best possible sound quality where space is a premium, MTX recommends using a sealed enclosure. For excellent sound quality with increased output compared to sealed enclosures (3dB or more), MTX recommends using a vented enclosure. All recommended enclosures have been designed and thoroughly tested by MTX.

TN12-04

Net Internal Volume: 1.25 ft ²

Parts List

La Lista de partes. Liste de parties. Ensatzegebäte

[A] - 3/4" (19mm) MDF

[C] - 3/4" (19mm) MDF

[B] - 3/4" (19mm) MDF

[D] - 3/4" (19mm) MDF

Para la major calidad nano posible donde espace es una prima, MTX recomineta utilizzando un cero soltado. Para la calidad sino exoceste con la producción aumentable compared con cerose selectiva (30 b de más). MTX recomineta utilizzando un descargar rerto. Todos corteas recomendares se han diseñado y han sido prodatos complementares por MTX. Pour la qualité solle le minus poco su l'indice est une prima, MTX recomineta utilisant una citrue scastles. Pour la qualidade sola excellanta (via la production augmenté en comparación des corteas acetales) (or plus), la recomineta utilisant una citrue donde vert. Todos corteas recomendares qui ein contrast en el día elécteads a fond par MTX. (Fur de bestamighado) Qualità ha spent una Prime, ni., empetent Alma, il, empetent Alma, il, al. Des Bursón van einer afdigstefien Erschiefung. Für ausgezeichnete geavande Qualität gibt mit vermend verglichen zu afdigstefien Erschiefungen (30 dde mehr), MTX, dad, das Bursón van einer vortez Erschiefung angeptez, all. Alle oplethenen Erschiefungen sind entwerten worden und gründlich du MTX geprüft worden.

mtx audio

Vented Enclosure

For the best possible sound quality where space is a premium, MTX recommends using a sealed enclosure. For excellent sound quality with increased output compared to sealed enclosures (3dB or more), MTX recommends using a vented enclosure. All recommended enclosures have been designed and thoroughly tested by MTX.

Net Internal Volume: 2.00 ft³

Parts List

La Lista de partes, Lise de porbes, Ersatzstellato

[A] - 3/4" (19mm) MDF

[D] - 3/4" (19mm) MDF

[B] - 3/4" (19mm) MDF

[C] - 3/4" (19mm) MDF

[E] - 3/4" (19mm) MDF

[F] - 3/4" (19mm) MDF

Mitek Mobile products (including MTX, Streetwires, Coustic and Magnum) purchased in the USA after 1/1/2013 from an authorized Mitek retailer are guaranteed to be free from material defects in products and workmanship for five (5) years to the original end user purchaser, subject to the terms and conditions below.

Length of Limited Warranty and Remedy

The warranty period begins the day the product is purchased by the end user, and is limited to the original retail purchaser of the product.

Free Replacement Period (2 Years)

Products found to be defective in materials or workmanship during the first 2 years will be, at Mitek's option, repaired or replaced by Mitek at no charge. When a product is replaced during first 2 years, the warranty does not renew, it continues on from the original date of purchase.

Proration Period (Years 3-5)

The prorated purchase price of any product which becomes defective after the first two years and prior to the end of the warranty period may be credited toward the purchase of a new Mitek product. The amount of the proration shall be determined by dividing the purchase price by the number of months of the warranty period (60), and then multiplying the result by the number of months remaining in the warranty period. Any partial months will be rounded to the nearest whole month. For example, a product purchased 37 months ago for \100 would be calculated by dividing \100 by 60 months = \1.66/month, multiplied by 23 (the months remaining in the warranty period) for a prorated warranty amount of \38.33.

You are responsible for all costs for removal, reinstallation and proper packaging, shipping, insurance or other freight charges incurred in the shipment of the product or part to Mitek. Mitek will ship the repaired or replaced Mitek product or replacement parts to you at no charge. Mitek reserves the right to utilize reconditioned, refurbished, repaired or remanufactured products or parts in the warranty repair or replacement process. Such products and parts will be comparable in function and performance to an original product or part and warranted for the remainder of the original warranty period.

What Is Not Covered

This warranty does not cover the product if it has been subject to neglect, abuse, misuse, incorrect connection, or if it has been subject to unauthorized repair or alterations of any nature, or if the serial number has been altered or removed, and the warranty does not extend to cosmetics or finish. This warranty only applies to products installed and used in the USA.

What You Must Do to Obtain Warranty Service

You must contact Mitek Warranty via our website at MTX.com, or via email at [e-mail], or by calling 800-556-2888. If you did not purchase the product directly from Mitek, a proof of purchase must be provided in order to receive warranty consideration. You will be issued a Return Authorization (RA) number which must be written on the outside of the package before returning the product to Mitek.

No Other Warranties

THE LIMITED WARRANTIES DESCRIBED ABOVE ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. MITEK DISCLAIMS AND EXCLUDES ALL OTHER EXPRESS WARRANTIES, AND DISCLAIMS AND EXCLUDES ALL WARRANTIES IMPLIED BY LAW, INCLUDING WITHOUT LIMITATION THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT APPLICABLE LAW PROHIBITS THE EXCLUSION OF IMPLIED WARRANTIES, THE DURATION OF ANY APPLICABLE IMPLIED WARRANTY IS LIMITED TO THE PERIOD SPECIFIED FOR THE EXPRESS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Any oral or written description of any Mitek product is for the sole purpose of identifying it and shall not be construed as an express warranty.

Limitation of Liability

MITEK'S OBLIGATION TO PROVIDE A CREDIT, OR REPAIR OR REPLACE AT MITEK'S OPTION, SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND MITEK'S SOLE AND EXCLUSIVE OBLIGATION. MITEK SHALL NOT BE LIABLE FOR INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MITEK PRODUCT, ITS USE OR PERFORMANCE. Incidental damages include, but are not limited to, such damages as loss of time and loss of use. Consequential damages include, but are not limited to, the cost of repairing or replacing other property which was damaged if the Mitek product does not work properly.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This limited warranty supersedes all prior warranties and is not transferable from the original consumer purchaser.

Any assistance Mitek provides to or procures for you outside the terms, limitations or exclusions of this limited warranty will not constitute a waiver of such terms, limitations or exclusions, nor will such assistance extend or revive the warranty. Mitek will not reimburse you for any expenses incurred by you in repairing or replacing any defective product, except for those incurred with Mitek's prior written permission.