N-232 - Network card ST Lab - Free user manual and instructions
Find the device manual for free N-232 ST Lab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Card |
| Brand | ST Lab |
| Model | N-232 |
| Interface | PCI Express x1 |
| Data Transfer Rate | 10/100/1000 Mbps (Gigabit Ethernet) |
| Connector Type | RJ-45 |
| Compliance Standards | IEEE 802.3, 802.3u, 802.3ab |
| Bus Width | 32-bit |
| Form Factor | Low profile / Standard bracket |
| Dimensions (L x W x H) | 120 x 80 x 20 mm |
| Weight | 50 g |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -20°C to 70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Power Consumption | 2.5 W (typical) |
| LED Indicators | Link/Activity, Speed |
| Supported Operating Systems | Windows, Linux, macOS |
| Features | Auto-negotiation, Wake-on-LAN, Jumbo Frame support |
| Package Contents | Network card, low-profile bracket, driver CD, user manual |
| Warranty | 2 years |
Frequently Asked Questions - N-232 ST Lab
How do I install the ST Lab N-232 network card?
Turn off your computer, unplug it, open the case, insert the card into an available PCI Express slot, secure it with a screw, close the case, power on, and install the drivers from the provided CD or downloaded from the ST Lab website.
Which operating systems are supported?
The N-232 supports Windows (7, 8, 10, 11), Linux (kernel 2.6+), and macOS (10.9 and later). Drivers are included on the CD or available online.
Why is my network card not detected?
Ensure the card is fully seated in the slot. Check if the BIOS has the PCIe slot enabled. Try a different slot if available. Also verify that the card is receiving power (LEDs should light up).
How can I tell if the card is working?
After installation, check the Device Manager (Windows) or lspci (Linux) for an Ethernet controller without errors. The link LED on the card should be solid or blinking when a cable is connected.
What do the LEDs on the N-232 indicate?
The Link/Activity LED lights up when a network cable is connected and blinks during data transfer. The Speed LED shows 1000 Mbps (green), 100 Mbps (orange), or 10 Mbps (off).
Can I use this card with a low-profile case?
Yes, the package includes a low-profile bracket. Replace the standard bracket with the low-profile one before installation to fit smaller cases.
How do I update the drivers?
Visit the ST Lab support page, search for N-232, download the latest driver for your OS. On Windows, you can also update via Device Manager by right-clicking the adapter and selecting 'Update driver'.
Does the N-232 support Wake-on-LAN?
Yes, it supports Wake-on-LAN. You need to enable it in the adapter's advanced settings in Device Manager and also in the BIOS. Ensure the magic packet is sent to the correct MAC address.
What is the maximum cable length supported?
For Gigabit Ethernet, the maximum cable length for Cat5e or Cat6 is 100 meters (328 feet). Use a quality cable to ensure reliability.
How to troubleshoot a slow network connection?
Check the link speed in the adapter properties; ensure it is set to Auto-negotiation. Update drivers, check cable quality, and avoid interference from other devices. Run a speed test from a wired connection.
User questions about N-232 ST Lab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual N-232 - ST Lab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N-232 by ST Lab.