N-430 - Network card ST Lab - Free user manual and instructions
Find the device manual for free N-430 ST Lab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Card |
| Brand | ST Lab |
| Model | N-430 |
| Interface | PCI Express |
| Data Transfer Rate | 10/100/1000 Mbps |
| Connector Type | RJ45 |
| Bus Type | PCIe |
| Dimensions (L x W x H) | 120 x 80 x 20 mm |
| Weight | 50 g |
| Power Consumption | 2.5 W |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Supported Operating Systems | Windows, Linux, macOS |
| LED Indicators | Link/Activity |
| Compliance | IEEE 802.3, 802.3u, 802.3ab |
| Safety | Low voltage, ESD protection |
| Maintenance | Clean with dry cloth |
| Spare Parts | Not applicable |
| Repairability | Non-repairable; replace unit |
Frequently Asked Questions - N-430 ST Lab
How do I install the N-430 network card?
Power off your computer, open the case, insert the card into a free PCI Express slot, secure it with the screw, close the case, and boot up. Install drivers from the included CD or download from ST Lab's website.
What operating systems are supported?
The N-430 supports Windows (7/8/10/11), Linux (kernel 2.6+), and macOS (10.9+). Check the manual for specific versions.
The device is not detected. What should I do?
Ensure the card is properly seated in the PCI Express slot. Check BIOS settings to ensure the slot is enabled. Try a different slot if available. Reinstall drivers.
What is the maximum data transfer speed?
The N-430 supports Gigabit Ethernet with a maximum transfer rate of 1000 Mbps (1 Gbps) in full-duplex mode.
Can I use this card with a 100 Mbps switch?
Yes, the card is backward compatible with 10/100 Mbps networks. It will auto-negotiate to the highest common speed.
Does the card support Wake-on-LAN?
Yes, the N-430 supports Wake-on-LAN (WOL). Enable it in the device driver settings and configure your BIOS accordingly.
What are the LED indicators for?
The card has two LED indicators: one for link status (green when connected) and one for activity (blinking during data transfer).
How do I clean the network card?
Power off the computer and unplug it. Use a soft, dry cloth to gently wipe the card. Avoid liquids and abrasive materials.
Is the card compatible with PCI slots?
No, the N-430 uses a PCI Express interface. It will not fit into standard PCI slots. Check your motherboard for available PCIe slots.
Where can I download the latest drivers?
Visit the ST Lab official website at www.stlab.com and navigate to the support section. Search for 'N-430' to download the latest drivers and manuals.
User questions about N-430 ST Lab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual N-430 - ST Lab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N-430 by ST Lab.