CJD6X88TGOR - Network connector Panduit - Free user manual and instructions

Product Type	Keystone Jack
Category	Cat6A
Color	Orange (TGOR)
Material	High-impact thermoplastic, 94V-0 rated
Dimensions (L x W x H)	14.5 x 14.5 x 19.0 mm (0.57 x 0.57 x 0.75 in)
Weight	5 g (0.18 oz)
Operating Temperature	-40 to 70 °C (-40 to 158 °F)
Standards Compliance	TIA/EIA-568-C.2, ISO/IEC 11801 Class EA
Termination Style	110 IDC (Insulation Displacement Contact)
Wire Gauge	22–26 AWG solid or stranded
Connector Interface	RJ45 (8-position, 8-conductor)
Shielding	U/UTP (unshielded)
Performance	Supports 10GBASE-T up to 100 m
Compatible Faceplates	Panduit Modular Faceplates (e.g., CFPL2 series)
Compatible Patch Panels	Panduit Modular Patch Panels (e.g., CPP series)
Insertion Life	≥ 750 mating cycles
RoHS Compliant	Yes
Clean With	Isopropyl alcohol, dry cloth
Storage Temperature	-40 to 85 °C (-40 to 185 °F)

Frequently Asked Questions - CJD6X88TGOR Panduit

What tools are required to terminate the Panduit CJD6X88TGOR keystone jack?

You will need a 110 punchdown tool with a cut-side blade, a wire stripper for 22-26 AWG, and a cable jacket stripper. Optionally, a snips for trimming excess wire.

Is the CJD6X88TGOR compatible with Cat6A shielded cabling?

No, the CJD6X88TGOR is designed for U/UTP (unshielded) twisted pair cabling. For shielded applications, use Panduit shielded keystone jacks like the CJ6X88TGI.

What is the maximum data rate supported by this keystone jack?

The jack supports 10GBASE-T (10 Gbps) up to 100 meters when installed with Cat6A cable and proper termination. It is also backward compatible with 1000BASE-T and 100BASE-TX.

Can I use the CJD6X88TGOR with a standard 110-style patch panel?

Yes, it fits all standard 110-style patch panels and modular faceplates that accept keystone jacks. Ensure the panel opening is at least 14.5 mm square.

What color is the CJD6X88TGOR and is it available in other colors?

The model number ends with 'TGOR' indicating Orange color. Panduit offers this jack in many colors; the color suffix indicates the color (e.g., TGOR = Orange, TGWH = White, TGBL = Blue).

Does the jack come with a dust cap or label?

The CJD6X88TGOR is typically sold as a single keystone jack without accessories. Dust caps and labels can be ordered separately (e.g., Panduit DCJ6 dust cap or IDC6 label).

How do I know if the termination is successful?

After punchdown, use a network cable tester to verify continuity and correct pinout (T568A or T568B). A successful test shows all pairs connected end-to-end without shorts or opens.

What is the recommended cable type for the CJD6X88TGOR?

For optimal performance, use 23 AWG solid copper Cat6A U/UTP cable. Stranded cable can be used but may reduce maximum distance; ensure the cable is rated for 10GBASE-T.

Can the jack be mounted in a surface-mount box?

Yes, the keystone jack fits any standard surface-mount box with a rectangular keystone opening. Panduit offers boxes like the CBX2 series for surface-mount applications.

What is the warranty period for the CJD6X88TGOR?

Panduit provides a limited lifetime warranty against defects in material and workmanship. Refer to the product documentation or contact Panduit support for full terms.

USER MANUAL CJD6X88TGOR Panduit

1 NOTE: Use setting 9 of CJAST tool. Turn 2 times cut through the outer jacket and MaTriX tape only.

For Technical Support: www.panduit.com/resources/install_maintain.asp

12

T568B Wiring

R

→

1.

R
F

→

[Non-Text]

12
T568A Wiring

→

→

1. 

(OR)

→

→

1. 

13

14

15

REMOVAL STEPS
1

2

3

Notes:

1. For specified performance, follow TIA/EIA 568-C installation guidelines.
2. Jack modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062" (1.57mm) maximum insulated conductor outside diameter.
3. Jack modules may be re-terminated a minimum of 20 times.
4. For technical and performance information, consult Panduit technical support.

As with all Wiring Accessories, the following statements apply:

1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
4. Use caution when installing or modifying communication wiring.

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

www.panduit.com

E-mail:

Cable Prep for non-MaTriX Category 6A Cable

1

2

3

4

Continue with steps 8-15 on pages 1 and 2 to complete termination.