T27A550 - Screen/Monitor SAMSUNG - Free user manual and instructions

USER MANUAL T27A550 SAMSUNG

SyncMaster imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at wWww.samsung.com/register Eur

Figures and ilustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Digital TV notice Functionalties related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC] digital terrestral signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibilty to receive DVB-T or DVB-C signal. 2. DVB-Tis the DVB European consortium standard for the broadcast transmission of digital terrestral television and DVB-C is that for the broadcast transmission of digital TV over cable. 8. Although this TV set meets the latest DVB-T and DVB-C standard, as of [August, 2008], the compatibiity with future DVB-T digital terrestral and DVB-C digital cable broadcasts cannot be guaranteed. 4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. 6. Some Digital TV functions might be unavalable in some countries or regions and DVB-C might not work correctiy with some cable service providers

6. For more information, please contact your local Samsung customer care centre.

The reception quality of TV may be affected due to diflerences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether i can be improved by reconfiguring TV setting or not. Still image warning Avoid displaying st images (ike jpeg picture fles) or stil image element (ike TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc) on the screen. Constant displaying of til picture can cause ghosting of screen, which wil affect image quaïty. To reduce risk of this effect, please folow below recommendations: + Avoïd displaying the same TV channel for long periods. + Alrays try do display any image on ful screen, use TV set picture format menu for best possible match. + Reduce brighiness and contrast values to minimum required to achieve desired picture qualty, exceeded values may speed up the burnout process, + Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for detais. Securing the Installation Space Keep the required distances between the product and other objects (e.g. wall) to ensure proper ventilation. Faling to do so may result in fire or a problem with the product due to an increase in he internal temperature of the product The actual appearance of the TV may differ from the images in this manual, depending on the model. Be careful when you touch the TV. Some parts can be somewhat hot. Installation with a stand. Installation with a wall-mount. 10cm 10cm + An administration fee may be charged if either —_ (a) an engineer is called out at your request and there is no defect in the product Le. where you have failed to read this user manual, —_ (b) you bring the unit to a repair centre and there is no defect in the product (Le. where you have failed to read this user manual, +__ The amount of such administration charge will be adised to you before any work or home visit is carried out. Engish 2

Contents Getting Started Connections Basic Features Advanced Features Other Information Safety Precautions Accessories Installing the Stand Viewing the Control Panel Viewing the Remote Control Connecting to an Antenna Plug & Play (Initial Setup) Connecting to an AV Device Connecting to a COMMON INTERFACE slot Connecting to an Audio Device Connecting to a PC Changing the Input Source How to Navigate Menus Using the INFO button (Now & Next guide) Using the Channel Menu Channel Menu Picture Menu Sound Menu System Menu Support Menu Using the My Downloads Anynet+ (HDMI-CEC) Installing the Device Driver Analogue Channel Teletext Feature Attaching a Wall Mount/Desktop Stand Assembling the Cables Anti-theft Kensington Lock Troubleshooting Specifications Index This function can be used by pressing the TOOLS button on the remote control Check the Symbol!

Note Step by Step Guide English HSTION3

Getting Started Icons used for safety precautions Failing to follow the precautions marked with this sign may result in a serious injury or AÀ WARNING rai Faling to follow the précautions marked with this sign may result in a personal injury or A CAUTON anenen © 20 not periom ® mastre iolowed. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOGK, DO NOT REMOVE COVER (OR BACK}. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product This symbol alerts you that important literature concerning operation and maintenance has been included with this product. EL Power Related The following images are for your reference and may differ depending on models and countries. À Warning Avoid using a damaged power cord or plug or a loose power outlet. + Otherwise, it may result in electric shock or fire. Avoid plugging in or unplugging the power supply with wet hands. + Otherwise, it may result in electric shock. Make sure to connect the power cord to a grounded wall outlet (for insulation class 1 equipment only). + Otherwise, it may result in electric shock or injury. Avoid connecting multiple electric appliances to a single wall outiet. + Otherwise, it may result in fire due to overheating of the wall outlet. Plug the power plug in firmiy. + Otherwise, it may result in fie. Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord + Otherwise, it may result in electric shock or fire due to a damaged power cord. Engish 4

Getting Started Keep the power cord and the product away from a heater. + Otherwise, it may result in electric shock or fire. Avoid unplugging the power plug while the product is operating + Othermise, it may damage the product due to electric shock. When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord. + Otherwise, it may result in electric shock or fire. Installation Related If the pins ofthe power plug or the wall outlet are covered in dust, clean it using a dry cloth. + Otherwise, it may result in fire. Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance. + Otherwise, it may result in electric shock or fire. Connect the power plug to a wall outlet that can be easily reached. + When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product. À Warning Avoid placing burning candies, mosquitorepellentor cigarettes on the product. + Othermise, it may result in fire. Avoid instaling the product in a badiy-ventilated location such as inside a bookshelf or closet: + Otherwise, it may result in fire due to internal over-heating. Avoid instaling the product in a location that is unstable or exposed to excessive vibration such as on an unstable or slanted shelt. + The product may fall and this may result in damage to the product or injury. +_ If you use the product in a location exposed to excessive vibrations, it may result in a problem with the product or fire. Ask an installation engineer or relevant company to install the product onto the wall. + Otherwise, it may result in injury. + Make sure to use the specified wall mount. Keep the plastic bags used to pack the product away from children. *__Ifchidren place the plastic bags over their heads, they may suffocate. Avoid instaling the product in à location exposed to dust, moisture sauna), ol, smoke or water (rain drops) and instaling it within a vehicle. + This may result in electric shock or fire. Engisn 5

Getting Started Avoid instaling the product in a location exposed to direct suntight and installng the product near a heat source such as a fireplace or heater. + This may shorten the product life cycle or cause fire. Bend the outdoor antenna cable dounwards at the location where it comes in the house so that rainwater does not flow in. +_Ifrainwater enters the product, it may result in electric shock or fie. Do not let the product drop while moving it. + This may result in a problem with the product or injury. When instaling the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelt + Otherwise, this may cause the product to fall off and result in à malfunction or injury + Make sure to use a cabinet or shelf suitable to the size of the product. Ifthe product is installed in à location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, instal the product only after consulting one of our service engineers about the matter. + Places exposed to microscopic dust, chemicals, 100 high or low temperature, high humidity, airports or stations where the product is continuousiy used. Avoid instaling the product where children may reach it. + _Ifa child touches the product, the product may fall and this may result in injury. + Since the front part is heavier, install the product on a flat and stable surface. Install the antenna far away from any high voltage cables. + _Ifthe antenna touches or falls onto a high voltage cable, it may result in electric shock or fire. Do not place the product face down on the floor. + This may damage the panel of the product. When putting the product down, handle it gentiy. + Otherwise, it may result in a problem with the product or injury. Engish 6

Getting Started | | Cleaning Related À Warning À Caution Before cleaning the product, unplug the power cord. Otherwise, it may result in electric shock or fire. Avoid spraying cleansing agent directiy onto the product. This may result in discoloration or cracking of the exterior ofthe product or the panel coming of. If you can't get the product clean [| Usage Related ù with just the supplied cloth, use a soft, damp cloth with a "monitor- exclusive cleansing agent’ and wipe the product with it If no monitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning the product.

When cleaning the product, do not spray water directly over the product parts. + Make sure that water does not enter the product. + Otherwise, it may result in fire, electric shock or a problem with the product. When cleaning the product, disconnect the power cord and clean the product with the supplied cleaning cloth. + Avoïd using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing agent when cleaning the product This may result in the exterior being deformed or the print being removed. Since the exterior of the product is easily scratched, be sure to use the supplied cleansing cloth À Warning Since a high voltage runs through the product, never disassemble, repair or modify the product yourself Otherwise, it may result in fire or electric shock Ifthe product needs to be fixed, contact a service centre. To move the product, turn the power off and unplug the power cord, the antenna cable and any other wires connected to the product. + Otherwise, it may result in electric shock or fire due to the damaged power cord. Engish 7

Getting Started Ifthe product generates a strange noise, a burning smel, or smoke, unplug the power plug immediately and contact a service centre. + Otherwise, it may result in electric shock or fire. If you drop the product or the case is damaged, turn the power off and unplug the power cord. Contact a service centre. + Otherwise, it may result in fire or electric shock. When thunder or lighting occurs, unplug the power cord and under no circumstance touch the antenna cable as this is dangerous. + Otherwise, it may result in electric shock or fire. Avoid moving the product by puling the power cord or antenna cable. + Otherwise, it may result in electric shock, fre or a problem with the product due 10 damage to the cable. Avoid lifting up or moving the product by holding only the power cord or signal cable. + Otherwise, it may result in electric shock, fre or a problem with the product due 10 damage to the cable. Take care not to block the vent by à table cloth or curtain. + Otherwise, it may result in fire due to internal overheating, Avoid letting children hang or climb onto the product. + Otherwise, it may result in the product faling and this may result in injury or death. Avoid placing objects such as toys and cookies on top of the product. + _Ifa child hangs over the product to grab an object, the object or the product may fall and this may result in injury or even death. Avoid dropping an object over the product or cause impact to the product. + Otherise, it may result in electric shock or fre. When a gas leak occurs, do not touch the product or the power plug and ventilate immediately. + Aspark may result in an explosion or fie. + During a thunder or lighting storm, do not touch the power cord or antenna cable. Avoid using or placing inflammable spray or objects near the product. + This may resul in an explosion or fie. Avoid inserting metal objects such as a chopsticks, coins or hairpins, or inflammable objects into the product (the vents, ports, etc). + lfwater or substances enters the product, turn the power off, unplug the power cord and contact a service centre. + Otherwise, it may result in a problem with the product, electric shock or fre. Engish &

Getting Started À Caution Avoid placing a liquid container such as a vase, flowerpot, beverage, cosmelics or drugs, or a metal object over the product + _ lfwater or substances enter the product, turn the power off, unplug the power cord and contact a service centre. + Otherwise, it may result in a problem with the product, electric shock or fre Displaying a st image for à long time may create a persistent image or stain on the screen +2 Ifyou do not use the product for a long time, use the power-saving mode or set the screensaver to the moving picture mode. Set the appropriate resolution and frequency for the product + Otherwise, it may result in eye strain. Watching the product from too close a distance continuousiy may damage your eyesight. Itis important to give your eyes some rest (5 minutes every hour) when viewing the product screen for long periods of time. + This will alleviate any eye strain. Do not press doun hard on the product. The product may become deformed or damaged. When not using the product for a long time such as leaving your home, unplug the power cord from the wall outlet. + Otherwise, it may cause dust accumulation and result in fre caused by overheating or short circuit or result in an electric shock Avoid turning the product upside doun or move the product holding only the stand. + This may cause the product to fall resulting in damage to the product or injury. Avoid using a humidifier or cooker near the product. + Otherwise, it may result in electric shock or fire. Since the display panel is hot after using it for a long time, do not touch the product. Engish 9

Getting Started Keep the small accessories in a location out of the reach of children. Avoid placing a heawy object over the product. + Otherwise, it may result in a problem with the product or injury. Be careful that children do not place the batteries in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. +2 Ifchildren have had the battery in their mouths, consult your doctor immediately. Use only specified standard batteries. Do not use new and used batteries together. + This may cause a battery to break or leak and may cause fire, injury, or contamination (damage).

Take care when adjusting the angle ofthe product or the height of the stand. + _ If your hand or finger is caught, you may be injured. + _Ifthe product is tited excessively, the product may fall and this may result in injury. When using headphones or earphones, do not turn the volume 100 high. + Having the sound too loud may damage your hearing. When replacing the batteries, insert them with right polarity (+, -. + Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. The batteries (and rechargeable batteries] are not ordinary refuse and must be retumed for recycling purposes. The customer is responsible for returing the used or rechargeable batteries for recycling. + The customer can return used or rechargeable batteries to a nearby public recyciing centre or to a store seling the same type of the battery or rechargeable battery. Engisn 10

Getting Started Accessories $ Please make sure the following items are included with your TV. If any items are missing, contact your dealer. The items’ colours and shapes may vary depending on the models. Cables not included in the package contents can be purchased separately. Check that there is no accessory hidden behind packing materials when you open the box À CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET +_ Remote Control & Batteries (AAA x 2) + Cleaning Cloth + Warranty Card / Safety Guide (Not available in some locations) + Power Cord + User Manual + Quick Setup Guide + D-sub Cable =—p + SCART Adapter + Stereo Cable

+ Cable Holder + Stand Connector / Screws (2ea) svonr + CI Card Adapter *$ For best cable connection to this product, be sure to use cables with a maximum thickness as below + Maximum thickness - 0.55 inches (14mm) Engien LL

Getting Started Installing the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing dounwards. © JF (2) Fe Insert the Stand Connector into the Check ifthe Stand Connector is firmiy | Turn the connecting screw at the Stand in the direction shown by the | connected. bottom of the stand fully so that it is figure. completely fixed. Place a soft cloth over the table to Push the assembled stand into the Firmly fasten the stand using the protect the product and place the main body in the direction of the arrow | screws. product onto the cloth so that the front | as shown in the figure. ofthe product is facing downwards. - Caution eo] JL {eo Ithe height of * @ “on one side is Avoid lifting the product holding only different from the other side, unfasten | the stand the screws, adjust the heights, and re-assemble. à The cleaning cloth is supplied with black high-glossy models only. à The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Engin 12

Getting Started The product colour and shape may vary depending on the model. Control Panel SAMSUNG ! Power Indicator Blinks and tums off when the power is on and lights up in standby mode. Remote control sensor Aim the remote control towards this spot on the TU a Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER C# button on the remote control. MENU Displays an on-screen menu, the OSD (on screen display) of your TV features. -_a+ Adjusts the volume. In the OSD, use the — ag + buttons as you would use the < and > buttons on the remote control. Changes the channels. In the OSD, use the V CH A buttons as you would use the VE Y and A buttons on the remote control © Power) urns the TV on or of. Speakers - Standby mode Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). À small amount of electric power is still consumed even when the power button is turned of. It is best to unplug the power cord. Engin 13

Getting Started à This is a special remote control for the visually impaired persons and has Braile points on the Power, Channel and Volume buttons. Tums the TV on and of Have direct access to channels. Altemately select Teletext ON, Double, Mix or OFF. Adjusts the volume. Displays the main on-soreen menu. Displays the Content Home, which includes Watch TV (p. 22) My Dounloads (p. 36) and Source (p. 21). Quicky select frequently used functions. Move the cursor and select an item. Confim the setting Returns to the previous menu. These buttons are for the Channel List, Channel Manager, My Downloads menu, etc. Use these buttons in My Downloads and Anynet+ (HDMI-CEC) modes (p.36, 41). SOURCEE) ET — Installing batteries (Battery size: AAA) Displays and selects the available video sources. Retums to the previous channel Cuts of the sound temporari, Changes channels Displays channel lists on the screen (p.23) Displays the EPG (Electronic Programme Guide) (p. 22). Displays information on the TV screen. PMODE: Press Lo select the Picture Mode (p. 25) SRS: Sekcts SRS TruSurround HD mode(p . 29) DUAL I-IT: Sound effect selection (p.30) E-MANUAL: Not Available. PSIZE: Selects he Picture Size (p . 26) AD/SUBT.: Tums the audio description on and off (not avaïlable in some locations) {p . 29). / Displays digital subtiles (p . 33). Engien 14

Connections Connecting to an Antenna When the TV is initially powered on, basic settings proceed automatically. Preset: Connecting the mains and antenna.

ANT OUT Wen the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWER button. Plug & Play is available only when the Input Source is set to TV. $ Before turning on the TV, make sure the antenna cable is connected. & To return to the previous step, press the Red button. 1 Selecting alanguage Press the À or Y button, then press the ENTERCS button. POWER Select the desired OSD (On Screen Display) language. 2 Selecting Store Demo Press the 4 or à button, then press the ENTERC# button. or Home Use + Select the Home Use mode. Store Demo Mode is for retail environments. To return the units settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec. +_ Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home. Selecting a country Press the A or w button, then press the ENTER C# button. Select the appropriate country.

$ After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number. When you input the PIN number, “O-0-0-0" is not available Setting the Set the Clock Mode automatically or manual Clock Mode Selecting an antenna Press the A or Y button, then press the ENTERCS button. Select the Antenna source to memorise: Selecting a channel Press the A or Y button, then press the ENTERCS button. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel -> Auto Tuning (p. 24) 7 Enjoy your TV. Press the ENTERCS button. Oo O1 BR If You Want to Reset This Feature... Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0" (France: 1-1-1-1"). If you want to change the PIN number, use the Change PIN function You should do Plug & Play (MENU — System) again at home although you did in shop. a 1f you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0"{France: 1-1-1-1°): POWER (off) — MUTE —+ 8 > 2 — 4 + POWER (on). Engien L5

Connections Connecting to an AV Device Using an HDMI or an HDMI to DVI cable (up to 1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satelite receiver, VOR DVD/ DVD/ BEST <S HDMI IN 1(DVI), 2 / PC/DVI AUDIO IN For better picture and audio quality, connect to a digital device using an HDMI cable. An HDMI cable supports digital video and audio signals, and does not require an audio cable. — To connect the TV to a digital device that does not support HDMI output, use an HDM/DVI and audio cables. The picture may not display normally (if at al) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade: Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI Engin 16

PS ANTITTIIT In Ext. mode, DTV Out supports MPEG SD Video and Audio only. < When connecting to AV IN, the colour of the AV IN [VIDEO] jack (green) will not match the video cable (yellow). à To obtain the best picture quality, the Component connection is recommended over the A/V connection: Engien 17

Connections Attaching the CI Card Adapter Attach the adapter as shown below. To connect the CI CARD Adapter, follow these steps. We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD."

1. Insert the CI CARD Adapter into the two holes on the product @.

Please find a two holes on the rear ofthe TV. A two holes is beside the COMMON INTERFACE port.

2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the

lt may be difficult to insert after the mounting. Insert the card after attaching the CI CARD Adapter, on TV. Itis difficult to attach the module if you insert the card before attaching. ( We recommand that you insert the CI card before you mount the TV on a wall. Using the “Cl or CI+ CARD” To watch paid channels, the “Cl or CI+ GARD” must be inserted. + you don't insert the “Cl or CI+ CARD," some channels will display the message “Scrambled Signal”. + _ The palring information containing a telephone number, the “CI or C+ CARD” ID the Host ID and other information will be displayed in about 2-3 minutes. If an error message is displayed, please contact your service provicler. + When the configuration of channel information has fnished, the message “Updating Completed" is displayed, indicating the channel list is updated. NOTE You must obtain a “Cl or C+ CARD” from a local cable service provider. When removing the “Cl or CI+ CARD”, carefully pul it out with your hands since dropping the “Cl or CI+ GARD” may cause damage to it. Insert the “CI or C+ CARD” in the direction marked on the card. The location of the COMMON INTERFACE slot may be different depending on the model. “Cl or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. If you have any problems, please contact a service provicler. Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. Engin 18

Connections Connecting to an Audio Device Using an Optical (Digital) or a Headphone Connection Available devices: digital audio system, amplifier, DVD home theatre, PC r à Ddigital audio system

CEE — O DIGITAL AUDIO OUT (OPTICAL) + When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

5. CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

When the receiver (home theatre) is set to on, you can hear sound output from the TV's optical jack. When the TV is recelving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satelite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satelite receiver directly to an amplifier or home theatre. *S Headphones Q: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. + Sound function may be restricted when connecting headphones to the TV. + Headphone volume and TV volume are adjusted separately. Engin 19

Connections Connecting to a PC Using an HDMI cable or an HDMI to DVI cable or a D-sub cable Connecting through the HDMI cable may not be supported depending on the PC.

Connections Source (®) source — source Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box /STB satelite receiver. m TV/Ext./PC/HDMI/DVI c Z'HDMI2 / AV / Component / USB SOURCEE) & In the Source, connected inputs wil be highlighted. TV, Ext. and PC always stay activated. Basic Features Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions. MENU |

ENTERCS / Direction button: Move the cursor and select an item. Contrm the setting RETURN button: Returns to the previous menu. MENU button: Displays the main on-screen menu EXIT button: Exits the on-screen menu. Edit Name SOURCE —+ TOOLS — Edit Name > ENTERC# In the Source, press the TOOLS button, and then you can set an external input sources name you want. VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. When connecting a PC to the HDMI IN 1 (DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name. When connecting a PC to the HDMI IN 1 (DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name When connecting an AV devices to the HDMI IN 1 (DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name. Information SOURCE —+ TOOLS — Information —> ENTERC! You can see detailed information about the selected external device. How to Operate the OSD (On Screen Display) The access step may differ depending on the selected menu: 1 MENU [D The main menu options appear on the screen: Picture, Sound, Channel, System, Support 2 A/Y Select an icon with the À or Y button. 3 ENTER C# Press ENTERC# to access the sub-menu. 44" Select the desired submenu with the À or Y button. 5 + Adjust the value of an item with the <or > button. The adjustment in the OSD may differ depending on the selected menu 6 ENTER C# Press ENTERC# to complete the configuration 7A "Ts Press EXIT. Engin 21

Basic Features The display identifles the current channel and the status of certain audlio-viceo settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. + Scrol 4/3 to view information for a desired programme while watching the current channel. + Scrol A / w to view information for other channels. If you want to move to the currently selected channel, press the ENTERC# button. Using the Channel Menu Press the CONTENT button to select Watch TV, and then select the menu you want to use. Each screen will be displayed. +__ The displayed image may differ depending on the model. Guide (®) coNTENT + Watoh TV — Guide > ENTER CS The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on à channel status. Using Channel View + The displayed image may differ depending on the model. + E\ Red (Sche. Mgr : Displays the Schedule Manager. + Green (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. +13 Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours. + Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. + Information: Displays details of the selected programme. + © (Page): Move to next or previous page. + C# (Watch / Schedule) — When selecting the current programme, you can watch the selected programme. — When selecting the future programme, you can reserve to watch the selected programme. To cancel he schedule, press the ENTERC# button again and select Cancel Schedules: Schedule Manager CONTENT —> Watch TV — Schedule Manager — ENTERCY You can view, modify or delete a channel you have reserved to watch. Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function:

2. Press the ENTERCS button to add programme to

schedule manually. The Timer Viewing screen appears.

3. Pressthe 4/h / A / w buttons to set the Antenna

Channel, Repeat, Date or Start Time. Engin 22

Basic Features + Antenna: Select the desired antenna source + Channel: Select the desired channel + Repeat: Select Once, Manual, Sat-Sun, Mon-Fri or Everyday to set at your convenience. If you select Manual, you can set the day you want. The Y mark indicates the date is selected +_ Date: you can set desired date. itis available when you select Once in Repeat. + Start Time: You can set start time you want. On the Information screen, you can change or cancel a reserved information. + Cancel Schedules: Cancel a show you have reserved to watch. + Edit: Change a show you have reserved to watch. + Return: Retum to the previous screen. Channel List (®) CONTENT > Watch TV -> Channel List ENTER C# You can view all the channel searched. +__ The displayed image may differ depending on the model. When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. Using the operation buttons with the Channel List. J Red (Antenna): Switches to Air or Cable. +13 Yellow (Programme View / Channel View Displays the programme when digital channel is selected. Returns to the channel view + 43 (Ch. Mode / Channel}: Move to the type of channels you want to display on the Channel List screen. The option may differ depending on country. C# (Watch): Waïches the channel you select © (Page): Move to next or previous page. How to use Timer Viewing in Channel List (digital channels only) When you set the Timer Viewing in Channel List, you can only set the programme in Programme View.

when done. ff you want to cancel Timer Viewing, follow steps 1 through 8. Select Cancel Schedules. [] Using the Channel CONTENT —> Watch TV — Channel Manager — ENTERCY Channel Manager Edit the favourite channel and set the channels to Delete, Deselect All or Select AIl. You can edit the channel name only for analogue channels: +__ The displayed image may differ depending on the model. + (@) Channels: Select a channel in the AI, TV, Radio Data/Other, Analogue and Favourites 1 - 5 screen. Change the antenna, or channel settings using the menus in the top right corner of the screen. + (A) Favourites 1 - 5: Shows favourite channels. Using the colour buttons with the Channel Manager. + A Red (Antenna): Switches to Air or Cable. + 5 Blue (Sorting): Change the list ordered by channel name or channel number. Engin 23

Basic Features Channel Status Display Icons Icons |Operations B |Ananalogue channel Y |Achannelselected. % | Achannel set as a Favourite @ |Alocked channel. Channel Manager Option Menu) Set each channel using the Channel Manager menu options (Watch, Add to Favourites / Edit Favourites, Lock / Unlock, Edit Channel Name, Edit Channel Number, Delete, Deselect AIl / Select AI). Option menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

+ Watch: Watch the selected channel. + Add to Favourites / Edit Favourites ŒMEA): Set channels you watch frequentiy as favourites.

1. Select the Add to Favourites / Edit Favourites,

then press the ENTER C# button. _Ifthe channel is already added to favourite channel, Edit Favourites will be shown.

2. Press the ENTER CS button to select Favourites

1-5, then press the OK button. One favourite channel can be added in several of Favourites among Favourites 1 - 5. + Lock / Unlock @ÆE) : Lock a channel so that the channel cannot be selected and viewed: This function is available only when the Channel Lock is set 10 On The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0". Change the PIN using the Change PIN option. +_ Edit Channel Name (analogue channels only): Assign your own channel name. This function may not support depending on the region +_ Edit Channel Number : Ecit the number by pressing the number buttons desired. This function may not support depending on the region +_ Delete: You can delete a channel to display the channels you want. +_ Deselect AI / Select AII: Select all the channels or deselect all the selected channels in the channel manager. Channel Menu E Retuning Channels MENU [I — Channel — ENTERC# Antenna (Air / Cable)GTE=) Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV. Country The PIN input screen appears. Enter your 4 digit PIN number. Select your country so that the TV can correctly auto- tune the broadcasting channels. M Digital Channel: Change the country for digital channels. M Analogue Channel: Change the country for analogue channels. Auto Tuning & Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears. M Auto Tuning — Air/ Cable: Select the antenna source to memorise. Digital & Analogue / Digital / Analogue: Select the channel source to memorise. When selecting Cable — Digital & Analogue or Digital: Provide a value to scan for cable channels. Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV. If you select Quick, you can set up the Network, Network ID, Frequency, Modulation and Symbol Rate manually by pressing the button on the remote control. Network (Auto / Manual: Selects the Network ID setting mode among Auto or Manual Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. Frequency: Displays the frequency for the channel. (differs in each country) Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates. Engin 24

Basic Features M Cable Search Option {depending on the country) Sets additional search options such as the frequency and symbol rate for a cable network search. — Start Frequency / Stop Frequency: Set the start or stop frequency (differs in each country) — Symbol Rate: Displays available symbol rates. — Modulation: Displays avallable modulation values. Manual Tuning Scans for a channel manually and stores in the TV. $ If a channel is locked using the Channel Lock function, the PIN input window appears. M Digital Channel Tuning: Scans for a digital channel.

1. Press the EX button to select New

When selecting Antenna — Air: Channel, Frequency, Bandwidth When selecting Antenna — Cable: Frequency, Modulation, Symbol Rate

2. Press the w button to select Search. When

Scanning has finnished, a channel is updated in the channel list. M Analogue Channel Tuning: Scans for a analogue channel.

1. Press the EN button to select New.

2. Setthe Programme, Colour System, Sound

System, Channel and Search.

3. Press the w button to select Store. When scanning

has finnished, a channel is updated in the channel list. $ Channel mode + P {programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from PO to P99. You can select a channel by entering the position number in this mode. C (aerial channel mode) / S (cable channel mode) These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel. Fine Tune {analogue channels only) I the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manuall. Scrol to the left or right until the image is clear. Settings are applied to the channel you're currently watching. $ Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner To reset the fine-tuning, select Reset. Transfer Channel List The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function. M Import from USB: Import channel list from USB. M Export to USB: Export channel list to USB. this function is available when USB is connected. [] Changing the Preset Picture Mode MENU [I + Picture —+ Picture Mode > ENTER C# Picture Mode Select your preferred picture type. & When an input source is set to PC, the Picture Mode is only available the Standard and Entertain M Dynamic: Suitable for a bright room. M Standard: Suitable for a normal environment. M Movie: Suitable for watching movies in a dark room. M Entertain: Suitable for watching movies and games. % Available only PC mode. Engin 25

Basic Features | | Adjusting Picture Settings MENU I + Picture + ENTER C& Samsung MagicAngle This feature allows you to see optimal screen quality according to your viewing position. When viewing the screen at an angle from below, above or the side of the product, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. M Off: Select when viewing from the front position. M Lean back mode: Select when viewing from a slightiy lower position M Standing Mode: Select when viewing from the upper position. When Samsung MagicAngle is set to Lean back mode or Standing Mode, Gamma is not available. Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options for picture quality control. NOTE + In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available. + In PC mode, you can only make changes to Backlight, Contrast , Brightness and Sharpness: + Settings can be adjusted and stored for each external device connected to the TV. + Lowering picture brightness reduces power consumption Screen Adjustment M Picture Size: Your cable box / satelite recelver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Sets the picture to 16:9 wide mode Wide Zoom: Magnifls the picture size more than 4:3 Adjusts the Position by using A / w buttons: Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. Adjusts the Zoom or Position by using A / w button. 4:8: Sets the picture to basic (4:3) mode. Do not watch in 4:8 format for a long time. Traces of borders displayed on the left, right and centre ofthe screen may cause image retention (screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component {10801 / 1080p) signals are inputted: Adjusts the Position by using A / v / button. NOTE Depending on the input source, the picture size options may vary. The available items may differ depending on the selected mode. In PC mode, only 16:9 and 4:3 modes can be adjusted. Settings can be adjusted and stored for each external device connected to an input on the TV. If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function M 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS {Wide Screen Senice) size or the original size. Each European country requires different picture size. Not available in PC, Component or HDMI mode.

Basic Features M PC Screen Adjustment % Available only PC mode. Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine- tune again. After the noise has been reduced, readjust the picture so that i is aligned to the centre of screen. Position: Adjusts the PC screen position with direction button (A / w /4/b) Image Reset: Resets the image to default settings. | | Setting up the TV with Your PC Select the input source to PC. MENU -+ Picture —> ENTER CS Auto Adjustment@ŒTE= Frequency values/ position and fine tune are adjusted automatically. Not available when connecting with an HDMI to DVI cable. Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied {lfnot, contact your computer manufacturer or Samsung Dealer)

1. Click on “Control Panel” on the Windows start menu

2. Click on “Appearance and Themes” in the “Control

Panel" window and a display dialog-box will appear.

8. Click on “Display” and a display dialog box wil appear.

4. Navigate to the “Settings” tab on the display dialog-box.

+_ The correct size setting (resolution) LOptimum : 19: 1360 X 768 pixels / 20: 1600 X 900 pixels / 22-27: 1920 X 1080 pixels] +_Ifa vertical-frequency option exists on your display settings dialog box, the correct value is “60 or ‘60 Hz”. Otherwise, just click “OK” and exit the dialog box. Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product. + Straighten your back. +_ Keep a distance of 45-50 cm (15-19 inches) from your eyes to the screen. Look down at the screen and face the screen fonwards. +_Adjust the angle of the product so that light is not reflected onto the screen. +_ Keep your elbow at a right angle and keep your arm level with the back of your hand +_ Keep your elbow at a right angle. +_ Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart [] Changing the Picture Options Advanced Settings MENU [I -+ Picture —> Advanced Settings — ENTERCY (Advanced Settings are available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a more precise picture. In PC mode, you can only make changes to Gamma and White Balance Engin 27

Basic Features Advanced Settings &Moe C3 Ener D Re M Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. Œ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. M Shadow Detail (-2-+2): Increase the brighiness of dark images. M Gamma: Adjust the primary colour intensity. = RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. M Colour Space (Auto / Native): Adjust the range of colours available to create the image. M White Balance: Adjust the colour temperature for à more natural picture. R-Offset / G-Offset / B-Offset: Adjust each colours (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each colour (red, green, blue) brightness. Reset: Resets the White Balance to it default settings. M Flesh Tone: Emphasize pink “Flesh Tone." M Edge Enhancement (Off / On): Emphasize object boundaries. M Motion Lighting (Off / On): Reduce power consumption M by brightness control. Picture Options MENU [I + Picture —> Picture Options — ENTERC# In PC mode, you can only make changes to the Colour Tone. Picture Options Colour Tone Digital Noise Filter MPEG Noise Filter HDMI Black Level 3 Enter Reum Colour Tone (Cool / Standard / Warm1 / Warm2) *S_ Warmi or Warm2 wi be deactivated when the picture mode is Dynamic. Settings can be adjusted and stored for each external device connected to an input on the TV. Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by our TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. “when the signal is weak, try other options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays signal strength. Only available for analogue channels. When bar is green, you are receiving the best possible signal. MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality. HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth. Available only in HDMI mode. Film Mode (Off / Autoi / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality. Available in TV, AV, COMPONENT (480i / 1080) and HDMI (4801 / 1080) Engin 28

Basic Features Reset Picture (OK / Cancel) Resets your current picture mode to its default settings. L Changing the Preset Sound Mode MENU I + Sound — Sound Mode -» ENTERC& Sound Mode M Standard: Selects the normal sound mode. M Music: Emphasizes music over voices. M Movie: Provides the best sound for movies. M Clear Voice: Emphasizes voices over other sounds. M Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. & 1 Speaker Select is set to External Speaker, Sound Mode is disabled. | | Adjusting Sound Settings Sound Effect MENU —+ Sound — Sound Effect > ENTER C# (standard sound mode only) & 1 Speaker Select is set to External Speaker, Sound Effect is disabled. = SRS TruSurround HD (Off / On) This function provides a virtual 5.1 channel surround sound experience à through a pair of speakers using HRTF fl {Head Related Transfer Function) technology = _SRS TruDialog (Off / On) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more cleariy. M Equalizer Adjusts the sound mode. — Balance L/R: Adjusts the balance between the right and left speaker. — 100Hz / 300Hz / 1kHz / 3kHz / 10KHz (Bancidth Adjustment): Adjusts the level of specific bandwidth frequencies. — Reset: Resets the equalizer to its default settings.

E Sound Systems, Etc. MENU + Sound — ENTERC# Broadcast Audio Options M Audio Language {digital channels only) Change the default value for audio languages. The available language may differ depending on the broadcast M Audio Format {digital channels only) When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable. M Audio Description {not available in al locations) (digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. “S Audio Description (Off / On) Turn the audio description function on or off. Volume: Adjust the audio description volume. Additional Setting (digital channels only) M DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal {which is one of the signals received during a digital TV broadcast) to a desired level. à According to the type of broadcast signal, MPEG HE-AAC can be adjusted between -10dB and OdB. % Toincrease or decrease the volume, adjust between the range 0 and -10 respectively. Engin 29

Basic Features M SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format: You can select the Digital Audio output {SPDIF) format The available Digital Audio output (SPDIF) format may differ depending on the input source. E Selecting the Sound Mode Wen you set to Dual LE, the current sound mode is displayed on the screen Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (ms - 250ms) Audio Dual I-Il Defauit M Dolby Digital Comp (Line / RF): This function minimizes Tpe signal disparity between a dolby digital signal and a 20 Mono Mono Automatic voice signal (Le. MPEG Audio, HE-AAC, ATV Sound) Stereo L_Ster0 | Stereo + Mono change Select Line to obtain dynamic sound, and RF Dual Dual I ++ Dual I Dual I to reduce the difference between loud and soft Mono Mono Automatic sounds at night time. NICAM | Stereo Mono +> Stereo change Line: Set the output level for signals greater or less than Stereo Mono +» Dual I -81dB (reference) to either -20dB or -31dB. Dual < Dual I Dual I RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. $ Ifthe Stereo signal is weak and an automatic switching, oceurs, then switch to the Mono. Speaker Settings Only activated in stereo sound signal. Only available when the input Source is set to TV. E Setting the Time M Speaker Select (External Speaker / TV Speaker): A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings wil be limited. When Speaker Select is set to External Speaker. + TV Speaker: Off, External Speaker: On When Speaker Select is set to TV Speaker. MENU [I + System — ENTERCS Time M Clock: Setting the clock is for using various timer + TV Speaker: On, External Speaker: On & Ifthere is no video signal, both speakers will be mute. M Auto Volume (Off / Normal / Night): To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. Reset Sound (OK / Cancel) Reset all sound settings to the factory defaults. features of the TV. The current time will appear every time you press the INFO button. if you disconnect the power cord, you have to set the clock again. Clock Mode (Auto / Manual) + Auto: Set the current time automatically using the time from a digital channel. $ The antenna must be connected in order to set the time automatically. + Manual: Set the current time manual. à Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manual. Engisn 30

Basic Features Clock Set: Set the Day, Month, Year, Hour and Minute manually. Available only when Clock Mode is set to Manual. You can set the Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control. Time Zone (Auto / Manual): Set the time zone to GMT. This function is only available when the Clock Mode is set to Auto.

— GMT(GMT-3:00-GMT-1:00 / GMT /

GMT+1:00-GMT+ 12:00): Selects your lime zone. This function is only available when the Time Zone is set to Manual — DST(Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or off. This function is only available when the Time Zone is set to Manual Using the Sleep Timer M Sleep Timer Œ Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). To cancel Sleep Timer, select Off. Setting the On / Off Timer M On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock fist. Setup: Select Off, Once, Everyday, Mon-Fri, Mon-Sat, Sat-Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. The Y markindicates the day is selected. On Time: Set the hour and minute. Volume: Set the desired volume level. Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select ATV or DTV. Channel (when the Source is set to TV): Select the desired channel. Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo fils to be played when the TV is tumed on automatically. NOTE If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctiy. When there is only one photo fil in the USB, the Slide Show will not play. If a folder name is too long, the folder cannot be selected. Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folcers assigned to each USB have different names. It is recommended that you use a USB memory stick and a multi card reader when using On Timer. The On Timer function may not work with USB devices with a buil-in battery, MP3 players, or PMPS made by some manufacturers because these devices take a long time to be recognized. Engish 1

Basic Features M Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. You must set the clock first. "OMTmer Setup: Select Off, Once, Everyday, Mon-Fri, Mon-Sat, Sat-Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. & The Y mark indicates the day is selected. Off Time: Set the hour and minute. [| Locking Programmes MENU + System — Security —> ENTER CS Security The PIN input screen appears before the setup screen. $ Enter your 4-digit PIN, the default of which is “O-0-0-0". Change the PIN using the Change PIN option. M Channel Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme. Available only when the input Source is set to TV. M Program Rating Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If selected channel is locked, the “a” symbol will be displayed Allow All: Unlock AI TV ratings (Not supported in France and Sweden). When Program Rating Lock is set to 18, the PIN input screen appears before changing the channels (France only). A You can block TV programs by set up rating in Program Rating Lock as the I (children), T (AI public), SC (Unclassified) and X (X rated). When Program Rating Lock is set to X, the PIN input screen always before changing the channels (Spain oniy). A You can block TV programs by set up rating in Program Rating Lock as the Children, Youth or Adult (Sweden only. M Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. Change your personal ID number required to set up the TV Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorised. How to watch a restricted channel Ifthe TV is tuned to a restricted channel, the Program Rating Lock wil block it. The screen wi go blank and the following message will appear: This channel is blocked by Program Rating Lock. Please enter the PIN to unblock. ff you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to “0-0-0-0;’ POWER (off) — MUTE — 8 — 24 — POWER (or) [] Economical Solutions MENU + System — Eco Solution — ENTERC# Eco Solution M Energy Saving (Off / Low / Medium / High / Picture of) ES) : This adjusts the brighiness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. M No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if its not receiving a signal Disabled when the PC is in power saving mode. M Auto Power Off (Off / On): Saves power by turning TV off automatically when no user operation is received for 4 hours. Engish 32

Basic Features RL Other Features MENU I + System —> ENTERCS Language M Menu Language: Set the menu language. M Teletext Language: Set a desired language for teletext English is the default in cases where the selected language is unavailable in the broadcast M Preference (Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select à language, which wil be the default language when a channel is selected. Subtitle Use this menu to set the Subtitle mode: M Subtitle (Off / On): Switches subtiles on or off. M Subtitle Mode (Normal / Hearing Impaired): Sets the subtile mode: M Subtitle Language: Sets the subtitle language. & Ifthe programme you are watching does not support the Hearing Impaired function, Preferred automatically activates even if the Hearing Impaired mode is selected English is the default in cases where the selected language is unavailable in the broadcast Digital Text (Disable / Enable) {UK only) Ifthe programme broadcasts with digital text, this feature is enabled! Auto Protection Time M Off/2 hours /4 hours / 8 hours / 10 hours: Ifthe screen remains ide with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. General M Max. Power Saving (Off / On): Turn off PC monitor when PC is not used for certain length of time to reduce power consumption. % Available only PC mode. M Game Mode (Off / On}: When connecting to a game console such as PlayStation"”! or Xbox", you can enjoy a more realistic gaming experience by selecting game mode. NOTE + Precautions and imitations for game mode — To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. — If you display the TV menu in Game Mode, the screen shakes slightly. + Game Mode is not available when the input source is set to TV or PC. + After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. + If Game Mode is On: — Picture mode is set to Standard and Sound mode is set to Movie. M Menu Transparency (Bright / Dark): Set the Transparency of the menu. M Boot Logo (Off / On): Display Samsung logo when the TVis turned on. Anynet+ (HDMI-CEC) GE) For details on set up options, refer to the “Anynet+ (HDMI- CEC)" instructions. DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration fl. If you play the VOD registration using My Downloads, the registration is completed. For more information on DivX® VOD, visit “http:/vod. divx.com”. Engisn 33

Basic Features Common Interface M Ci Menu: This enables the user to select from the CAM- provided menu. Select the CI Menu based on the menu PC Card. M Application Info: View information on the CAM inserted into the CI slot and on the “Cl or CI+ GARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off.

1. Purchase a CI CAM module at your nearest dealer or by

2. Fimmly insert the “Cl or CI+ CARD” into the CAM in the

direction of the arrow.

8. Insert the CAM with the “Cl or CI+ CARD” into the

common interface slot, in the direction of the arrow so that it aligns parallel with the slot.

4. Check if you can see a picture on a scrambled signal

channel. [| Picture In Picture (PIP) MENUI -> System —> PIP > ENTER CS PIP You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode. NOTE + For PIP sound, refer to the Sound Select instructions. +_ If you turn the TV off while watching in PIP mode, the PP window wil disappear. + You may notice that the picture in the PIP window becomes slightiy unnatural when you use the main screen to view a game or karaoke. + While Program Rating Lock is in operation, the PIP function cannot be used. + PIP settings Main picture Sub picture Component, HDMIH/DVI | ny HDMI2, PC PIP (Off / On): Activate or deactivate the PIP function Channel: Select the channel for the sub-screen. Size (La) / Ca}: Select a size for the sub-picture Position (C2 / C1 / 1 / LI}: Select a position for the sub-picture. M Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode. Support Menu MENU D + Support > ENTERC& Self Diagnosis self Diagnosis might take few seconds, this is part of the normal operation of the TV. M Picture Test (es / No): Use to check for picture problems. Yes: lf the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung's Call Centre for assistance. No: Ifthe test pattern is properly displayed, select No There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external devices user manual. M Sound Test (Ves / No): Use the buit-in melody sound to check for sound problems. if you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. The melody wil be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung's Call Centre for assistance. No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external devices user manual. Engisn 34

Basic Features M Signal Information: (digital channels only) An HD channels reception quality is either perfect or the channels are unavallable. Adjust your antenna to increase signal strength. M Troubleshooting: If the TV seems to have a problem, refer to this description. If none of these troubleshooting tips apply, contact the Samsung customer service centre. Software Upgrade Software Upgrade can be performed via a broadcasting signal or downloading the latest firmware from “wa. samsung.com,” to a USB memory device. Current Version the software already installed in the TV. $ Software is represented as “Year/Month/Day_ Version”. Software Upgrade Current Version 2011/01/18_000001 ByUSB By Channel C3 Enter Reum Installing the Latest Version M ByUSB: Insert a USB drive containing the firmware upgrade flle, downloaded from “www. samsung.com,”" into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings vou have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. TV Side Panel USB Drive M By Channel: Upgrade the software using the broadcasting signal. à 1fthe function is selected during the software transmission period, software wil be automatically searched and downloaded. The time required to download the software is determined by the signal status. M Alternative Software backup}: If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version. $ irthe software was changed, existing software is displayed. M Standby Mode Upgrade (Off / 1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 / 14:00): À manual upgrace wil be automatically performed at selected time. Since the power of the unit is turned on internal, the screen may be tued on slightl for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is complete. Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software. Engin 35

Advanced Features My Downloads Enjoy photos, music and/or movie fles saved on a USB Mass Storage Class (MSC).

2. Connect a USB device containing photo, music and/or movie fles to the USB r

jack on the side of the TV. = —

8. When USB is connected to the TV, popup window appears. Then you can select [IE] ] __—

New device connected. TV Side Panel & it might not work properly with unlicenced multimedia files. Need-to-Know List before using My Downloads MTP (Media Transfer Protocol) is not supported. The flle system supports FAT16, FATS2 and NTFS. Certain types of USB Digital camera and audio devices may not be compatible with this TV. My Downloads only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directiy to the TV's USB port. USB (HDD) is not supported. Before connecting your device to the TV, please back up your flles to prevent them from damage or loss of data. SAMSUNG is not responsible for any data flle damage or data loss. Do not disconnect the USB device whil it is loacling. The higher the resolution of the image, the longer it takes to display on the screen. The maximum supported JPEG resolution is 15860X8640 pixels. For unsupported or corrupted files, the “Not Supported File Format” message is displayed. If the filles are sorted by Basic View, up to 1000 files can be displayed in each folder. MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the ilegal copying of contents, as well as managing bilings and settlements. If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction Ifthe TV has been no input during time set in Auto Protection Time, the Screensaver will run. The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. *_Ifa USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. Engish 36

Advanced Features + fa USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection. *_Ifa file deleted from the PC is stil found when My Downloads is run, use the “Empty the Recycle Bin” function on the PC to permanentiy delete the file. + My Downloads only supports sequential jpeg format. +_ The scene search and thumbnail functions are not supported in the Videos. E Screen Display Move to the desired flle using the A /w / 4/3 buttons and then press the ENTER C& or [] (Play) button. The file is played. My Downloads screen may difler depending on the way to enter the screen. Information: Displays the selected content category (Muse, for example}, device (USB drive for example), folder/fle name, page, and sort criteria. File List Section: Displays îles or folders sorted by criteria you can select Edi Mode Contents mode / Device name: You can select the desired Content Category or Denice. Operation Buttons Yelow (Edit Mode}: Lets you select music by checking the fies you want to play. Only avaïlable in Music. Ed / Bw)(Page): Move to next or previous page. +1 Tools: Displays the option menu + Return: Move Lo the previous step. Videos Playing Video

— The selected file name is displayed on the top with its playing time — Ifvideo time information is unknown, play time and progress bar are not displayed — During video playback, you can search using 4 and à button. — You can use (El) (REW) and (Ex) (FF) buttons during playback In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. + Supported Subtitle Formats Name File extension Format MPEG-4 time-based text tt XML SAMI smi HTML SubRip st sting-based = SubViewer sub sting-based Nice DVD TER Sting based +__ The displayed image may differ depending on the model. Engisn 37

Advanced Features + Supported Video Formats File Extension | Container Video Codec Resolution | Fremerate | Bitrate Audio Codec (fps) (Mbps) DiX3.11/4x/5.1/60 1920x1080 | 6-30 8 +aû a H.264 BP/MP/HP 1920x1080 | 6-30 25 MPS/AC3/LPCM/ “mkv MKV MPEG4 SP / ASP 1920x1080 | 6-30 8 ADPCM / DTS Core Motion JPEG Gaogo | 6-30 8 DiX3.11/4x/5.1/60 1920x1080 | 6-30 8 H.264 BP/MP/HP 1920x1080 | 6-30 25 MP3/AC3/ LPOM/ as ASF et MPEGA SP / ASP 1920x1080 | 6-30 8 ADPCM/ WMA Motion JPEG Gaoso | 6-30 8 um ASF Window Media Video v9 1920x1080 | 6-30 25 WMA H.264 BP /MP/ HP 1920x1080 | 6-30 25 *mpé MPa MP3 / ADPCM / AAC MPEG4 SP / ASP 1920x1080 | 6-30 8 H.264 BP /MP/ HP 1920x1080 | 6-30 25 *3gp 3cPP ADPCM / AAG / HE-AAC MPEG4 SP / ASP 1920x1080 | 6-30 8 VRO MPEG 1920x1080 | 24/25/30 | 30 “vo AC3 / MPEG / LPOM voB MPEG2 1920x1080 | 24/25/30 30 MPEG 1920x1080 | 24/25/30 | 30 ue Ps MPEG2 18201080 | 24/25/30 30 | ACS/MPEG/LPCM/AAC H264 1920x1080 | 6-30 25 = MPEG2 1920x1080 | 24/25/30 | 30 IPS / “tp TS H.264 1920x1080 | 6-30 25 AGS/AAC/ MES DDe/ na HE-AAG voi 1920x1080 | 6-30 25 Other Restrictions % NOTE +_Ifthere are problems with the contents of a codec, the codec will not be supported. +_Ifthe information for a Container is incorrect and the file is in error, the Container wi not be able to play correctiy + Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. + Ifthe Index Table is in error, the Seek Jump) function is not supported. + Some USB/digital camera devices may not be compatible with the player. Video Decoder Audio Decoder + Supports up to H.264, Level 4.1 + Supports up to WMA, 8,9, STD + H264FMO/AS0 / RS, VC1 SP / MP / AP LA and AVCHD are not | + WMA 9 PRO does not support 2 channel excess multi channel or supported

— Below 1280 x 720: 60 frame max — Above 1280 x 720: 30 frame max + GMC 2 over is not supported. lossiess audio. + WMA sampling rate 22050Hz mono is not supported. Engisn 38

Advanced Features Music Playing Music

— You can use [#4 (REW) and E5] (FF) buttons during playback $ Only displays the files with MP and PCM fille extension. Other file extensions are not displayed, even if they are saved on the same USB device. button to select the desired Music 1fthe sound is abnormal when playing MP3 filles, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.) +__ The displayed image may differ depending on the model. Playing selected music

1. Press the [3 (Edit Mode) button

2. Select the desired music.

The Y mark appears to the left of the selected files.

3. Press the TOOLS button and select Play Selected Contents:

You can select or deselect all music pressing the Select AII / Deselect AI Photos Viewing a Photo (or Slide Show)

1. Pressthe A / w / 4/3 button to select the desired photo

— When a selected photo is displayed, press the ENTER C3! button to start the slide show. — During the slide show, al fles in the ile list will be displayed in order. — When you press the [>] (Play) button in the file list, slide show wil be started immediately. Music files can be automatically played during the Slide Show if the Background Music is set to On The Background Music cannot be changed until the BGM has finished loading. Engisn 39

Advanced Features | | My Downloads - Additional Functions Videos/Music/Photos Play Option menu During playing a file, press the TOOLS button. Category Operations. Videos | Music | Photos Title Search You can move the other file direct. 2 Time Search You can search the video using 4 and à button at one minute interval or entering the V number direct. Shuffle Mode You can play the music random. 2 Repeat Mode You can play movie and music fles repeatedhy v 2 Picture Size You can adust the picture size to your preference. 2 Picture Mode You can adust the picture setting. v v Sound Mode You can adust the sound setting, v 2 v Subtitle Language | You can view a subtile. You can select a specific language i the subtil fle contains v multiple languages. Subtitle Setting You can play the video win Subtties. Tis function only works IFihe subies are the same | À, fle name as the video. Audio You can enjoy video in one of supported languages as required. The function is only

enabled when stream-type fles which support muliple audio formats are played. Start Slide Show / | Vou can start or pause a Slide Show. V Pause Slide Show Slide Show Speed | You can select the side show speed during the slide show. V Background Music | You can onvoff background music when watching a Side Show. V Background Music | You can select background music when watching a Slide Show. V Setting Zoom You can Zoom into images in full screen mode. V Rotate You can rotale images in {ul Screen mode. V Information You can see detailed information about the played fie. 2 2 v Engish 40

Advanced Features What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TVS remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. +_ You can only control Anynet+ devices using the TV remote control, not the buttons on the TV. + The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. + The Anynet+ functions do not operate with other manufacturers’ products. + Forthe method of connecting external devices , refer to the supported user manual To connect to Home Theatre em || Anynet+ — us 1 LOT E) Device 2 2 5 O o 3 Now) HDMI Cable HDMI Cable = ee HDMI Cable

2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an

HDMI cable. NOTE + Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre. When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre's Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (Le. Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV. You can connect only one Home Theatre. You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. Anynet+ supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type. Engisn 41

Advanced Features Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Changes Anynet+ mode to TV broadcast mode Device List Shows the Anynet+ device list. Recording: (recorder) | Starts recording immediately using the recorder. (This is only available for devices that support the recording function.) (device_name) MENU | Shows the connected device menus. E.g, If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) Tools Shows the tools menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. $ Depending on the device, this menu may not be available. device_name) Title Menu | Shows the title menu of the connected device. E.g. If a DVD recorder is connected, the title menu of the DVD recorder will appear. $ Depending on the device, this menu may not be available. Stop Recording: (recorder | Stops recording. Receiver Sound is played through the receiver. If more than one recording device is connected, they are displayed as (‘recorder) and if only one recording device is connected, it wi be represented as (‘device_name) | | Setting Up Anynet+ MENU I -+ System —> Anynet+ (HDMI-CEC) —> ENTERC® M Anynet+ (HDMI-CEC) (Off / On) To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On: When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. M Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off. if Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off However, a device may not tum off if recording is in progress. May not be enabled depending on the device. L Switching between Anynet+ Devices Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTER C& button to select Device List. if you cannot find a device you want, press the EN button to refresh the list.

2. Select a device and press the ENTERC# button. You can switch to the selected device.

The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the System menu. + Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. +_ If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. Engin 42

Advanced Features | | Recording You can make a recording of a TV Programme using à Samsung recorder.

1. Select Recording.

When there are more than two recording devices + When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List. When the recording device is not displayed, press the IA button in the Device List menu to search devices.

2. Press the EXIT button to exit.

You can record the source streams by selecting Recording: (device_name). Pressing the Ce] (REC) button wil record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. < Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device's users manual. | | Listening through a Receiver You can listen to sound through a receiver (.e Home Theatre) instead of the TV Speaker.

1. Select Receiver and set to On.

2. Press the EXIT button to exit.

if your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. When the receiver (Le Home Theatre) is set to On, you can hear sound output from the TV's Optical jack. When the TVis displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. Engin 43

Advanced Features | | Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work Check the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Only one receiver {home theatre) can be connected Check the Anynet+ device power cord is properly connected. Check the Anynet+ devices Video/Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) s set to On in he Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether the remote control is Anynet+ compatible. Anynet+ doesn't work in certain situations. (Searching channels, operating My Downloads or Plug & Play {Initial setup), etc.) When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. Check the Anynet+ Function of Anynet+ device is set on. want to start Anynet+. Check the Anynet+ device is properly connected to the TV and check ithe Anynet+ (HDMI-CEC) is set 10 On in the Anynet+ Setup menu. Press the TOOLS button to display the Anynet+ menu and select a menu you want. want to exit Anynet+. Select View TV in the Anynet+ menu. Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. Press APV/, and PRE-CH to change the TV mode. (Note that the channel button operates oniy when a: tuner-embedced Anynet+ device is not connected) The message “Connecting to Anynet+ device... appears on the screen. You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. You cannot use the play function when Plug & Play (nil setup) s in progress. The connected device is not displayed. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) s set to On in he Anynet+ setup menu. Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI cable onfy. Some HDMI cables may not support Anynet+ functions. I connection is terminated because there has been a power interruption or the HDMI cable has been disconnected, please repeat Ihe device scan. The TV Programme cannot be recorded. Check whether the antenna jack on the recording device is proper connected The TV sound is not output through 1he receiver. Connect the optical cable between TV and the receiver. Engien 44

Other Information a 1f you install the device driver, you can set up the appropriate resolution and frequency for the product. The device BSN A Select the model of your product from the model list. Selectthe display adapter on which veu want t intall the monitor. T- NVIDIA GeForce SET GTS E Select he mantar which vou want ta install SyncMaster EyncMasier <i im | 3

driver is included on the CD supplied with the product. Ifthe supplied drive file is corrupted, please visit the Samsung Electronics website (mvw.samsung.com), and download the driver. Insert the driver installation CD into the CD-ROM drive: Click on Windows Driver. Complete the remaining installation steps according to the instructions displayed on the screen.

5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more

information, refer to the document about the Windows operating system. Engien 45

Other Information The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correc!ly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. & You can change Teletext pages by pressing the numeric buttons on the remote control. © © (eietext on/mix/ofl) (page up}: Displays the next Activates the Teletext mode for the d SOURCES 6 Teletext page current channel. Press the button ®) © 1 (page down): Displays the twice to overlap the Teletext mode e previous Teletext page. with the current broadcasting , ! © ED (index: Displays the index soran Press à ane moe im to 000 one page anse we , you are viewing Teletext. © 2 (store): Stores the Teletext O0QO freveel: Display tte hidden pages. text (answers to quiz games, for © E2 (size): Displays the teletext eæ = eæ example). To display the normal on the upper half of the screen in @ fr CD FE © screen, press It again. double-size. To move the text to @ En (cancel): Shrinks the Teletext {ne lower half of the screen, press O © display to overlap with the current it again. For normal display, press © braadéast it once again. e © l © © (hold): Holds the display at . the current page, in the case that DO © Typical Teletext page there are several secondary pages (=) mas that follow automaticialy. To undo, @ 3 63 @ press it again. E A 1 © Coïour buttons (red, green, yellow, [em Ê blue}: IF the FASTEXT system is used by the broadcasting ©- tn | Es 2) company, the different topics on Lam | a Teletext page are colour-coded @: and can be selected by pressing Part Contents the coloured buttons. Press the A [Sdectedpage colour corresponding to the topic number. of your choice. À new colour- 5 Bodo coded page is displayed. lems identity 9 can be selected in the same way. Le To display the previous or next G |Gurent page number page, press the corresponding or search indications. coloured button. D |Dateandtime. © © (mode): Selects the Teletext \ ) E _ [Tx. mode (LIST/ FLOF). F [Status information. If pressed during LIST mode, FASTEXT information. switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the Œd(store) button. © © (sub-page/: Displays the available sub-page. Engisn 46

Other Information Attaching a Wall Mount/Desktop Stand Preparing before installing Wall-Mount/Desktop Stand

1. Tum the product off and unplug the power cord from the wall outiet

2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down.

8. Separate the screw at the rear of the product

Hold the main body of the product with your hand as shown by the figure. Pul the stand in the direction of the arrow as shoun in the figure to separate it. @ "al/Desktop Stand Mount © Wal mount ki/deskop stand (not supplied

5. Align wall mount/desktop stand to the Monitor/TV and firmiy fix the wall mount/desktop stand by fastening the screw.

6. Algn the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmiy fix the stand by fastening the screw. NOTE + If you use screws that are longer than the standard specifications, the inside of the product may be damaged. + For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications. Engien 47

• Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force. This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any damage or injury. + Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/ desktop stand that is not compatible with the specifications or due to an installation not performed by an authorized installation engineer. + When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of space from the wall. + Use the wall mount according to the international specifications. Assembling the Cables Use the Cable Holder to hide the cables behind the stand. à The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. I is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the ilustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. $ Please find a “A icon on the rear of the TV. À kensington slot is beside the “A” icon. To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object such as desk

2. Side the end ofthe cable with the lock attached through the looped end of the

Kensington lock cable.

8. Insert the locking device into the Kensington slot on the product (@).

<Optional> $ These are general instructions. For exact instructions, see the User manual supplied with the locking device. à The locking device has to be purchased separately. à The location of the Kensington slot may be different depending on the TV model Engisn 48

Other Information Troubleshooting If you have any questions about the TV, first refer to this list. f none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. Issues [Solutions and Explanations. PC Connection A Mode Not Supported message + Set your PC'S output resolution and frequency so they match the resolutions supported by the TV appears. p.20). PC is always shown on the source list, + This is normal; “PC is always shown on the source list, regardless of whether a PC is connected. even if a PC is not connected. ‘The video is OK but ihere is no audio... I you are using a HDMI connection, check the audio output setting on your PC. Picture Quaity First of al, please perform the Picture Test and confim that your TV is properly displaying test image. {go to MENU - Support - Self Diagnosis - Picture Test) (p. 4) H he test image is properly displayed, the poor picture may caused by the source or signal. The TV image does not look as good as it did in the store. I you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. Cable/Satelite subscribers: Try HD stations from the channel ine up. Antenna connection: Try HD stations after performing Auto programme. à Many HD channels are up scaledi from SD(Standard Definition] contents. Adjust the Cable/Set top box video output resolution to 1080i or 720p. Make sure you are watohing the TV at the minimum recommended distance based on the size and definition of the signal. ‘The picture is distorted: macro block error, small block, dots, pixelization Compression of video contents may cause picture distorion especiall in fast moving pictures such as sports and action movies. Low signal level or bad quality can cause picture distortion. This is not a TV issue. Mobile phones used close to the TV {cca up to 1m) may cause noise in picture on analogue and digital TV. Colour is wrong or missing + Ifyourre using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause colour problems or a blank screen. There is poor colour or brighiness. + Adust he Picture options in the TV menu. (go to Picture mode / Colour / Brighiness / Sharpness) (p.26) Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution - Energy Saving) (. 32) Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture) (p.29) There is a dotted line on the edge ofthe | + Ithe picture size is set to Screen Fit, change it to 16:9 (p. 26). screen. + Change cable/set top box resolution. The picture is black and white. + lfyouare using an AV composite input, connect the video cable (pelow] to the Green jack of ‘component input 1 on the TV. When changing channels, the picture + lconnected with a cable box, please try to reset the cable box, Reconnect the AG cord and wait unti freezes or is distorted or delayed. the cable box reboots. It may take up to 20 minutes, Set the output resolution of the cable box to 1080i or 720p. Sound Quality First of al, please perform the Sound Test to confirm that your TV audio is proper operating. {go to MENU - Support - Self Diagnosis - Sound Test) (p. 54) Ifthe audio is OK, the sound problem may caused by the source or signal. ‘There is no sound or the sound is too low | + at maximum volume. Please check the volume the of external device connected to your TV. The picture is good but there is no sound. Set the Speaker Select option to TV Speaker in the sound menu (p. 30) I you are using an external device, make sure the audio cables are connected to the correct aucio input jacks on the TV. I you are using an external device, check the device's auclo output option (ex. you may need to change your cable box's auclo option to HDMI when you have a HDMI connected to your TV) I you are using a DVI to HDMI cable, a separate audio cable is required. I your TV has a headphone jack, make sure there is nothing plugged into it. The speakers are making an inapproprate | + noise... Check the cable connections. Make sure a video cable is not connected to an audio input For antenna or cable connections, check the signal strength. Lowr signal level may cause sound distortion. Engish 49

Other Information Issues [Solutions and Explanations. No Picture, No Video The TV won't turn on. + Make sure the AC power cord is securely plugged in to the wall outlet and the TV. Make sure lhe wall outiet is working! ‘Try pressing the POWER button on the TV 10 make sure the problem is not ihe remote. the TV turns on, refer to The remote control does not work” below. The TV turs off automaticaly. + Ensure the Sleep Timeris set to Off in he System menu (p. 31) + lfyour PC is connected to the TV, check your PC power settings. + Make sure the AC power cord is plugged in securely to he wall out and the TV. + Wnen waïching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal. There is no pictureWideo. + Check cable connections (remove and reconnect all cables connected to the TV and external devices) + Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an extemal devices output is HDMI, i should be connect to an HDMI input on the TV. + Make sure your connected devices are powered on. + Be sure to select the TVS correct source by pressing the SOURCE button on the TV remote. RF(Cable/Antenna) Connection The TV is not receiving al channeis. + Make sure the Antenna cable is connected secure Please try Plug & Play (Nil setup) to add available channeïs to the channel ist. Go to MENU - System - Plug & Play [nital setup) and wait for all avalable channeïs to be stored (p. 15) Verfy the Antenna is positioned correct. ‘The picture is distorted: macro block error | + small block, dots, pixalzation Compression of video contents may cause picture distorion, especialÿ with fast moving pictures such as sports and action movies. À low Signal can cause picture distortion. This is not a TV issue. Others The picture won't display in full screen + HD channels wi have black bars on either side of he screen when displaying up scaled SD (4:3) contents. + Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. + Adjust he picture size options on your external device or TV to ful screen. The remote control does not work + Replace the remote control batteries with the poles (+/-) in the right direction + Clean the sensors transmission window on the remote. + Try pointing the remote directiy at the TV from 5-6 feet away. The cable/set top box remote control + Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user doesn't tum the TV on or of, or adjust the volume. manual for the SAMSUNG TV code. A “Mode Not Supported” message + Check ihe supported resolution of the TV, and adjust the external device's output resolution appears. according}y (p. 27. There is a plastic smell from the TV. + This smellis normal and wil dissipate over time. The TV Signal Information is unavailable in the Self Diagnostic Test menu. This function is oniy avaïlable with digital channels from an Antenna / RF/Coax connection (p. 35). The TVis tited to the side... Remove the base stand from the TV and reassemble it. There are dificulties assembing the stand base. Make sure the TV is placed on a fat surface. If you can not remove the screws from the TV, use a magnetized screw driver. Engisn 50

Other Information Issues Solutions and Explanations The channel menu is greyed out + The Channel menu is on available when the TV source is selected. {unavaïable] Your settings are lost after 30 minutes or every time the TV is turned off. Ithe TV is in the Store Demo mode, i wil reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (hitial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU — System — Plug & Play (Initial setup) — ENTERCS (p. 15) You have intermittent loss of audio or + Check ihe cable connections and reconnect them. video. + Loss of audio or video can be caused by using over rgid or thick cables. Make sure the cables are flexible enough for long term use, If mounting the TV to the wall, we recommend using cables with 90 degree connectors. You see smal particles when you look +__ This is part of the products design and is not a defect ciosely at the edge of the frame of the TV. The PIP menu is not available. . PIP functionaïty is only available when you are using a HDMI, PC or components source (p. 84). The message “Scramble signal or “Weak Signal/No Signal” appears. you are using a CAM CARD (CI/CH+), check that it is installed into the common interface slot Iihere is stil a problem, pull the CAM GARD out of the TV and insert into the slot again. You tumed the TV off 45 minutes ago, and | + it turned on again. Itis normal. The TV operates the OTA (Over The Aerial function itsel to upgrade firmware downloaded wilst your watching TV. There are recurent picture/sound issues. | + Check and change the signal/source. Areaction may occur belween the rubber | + cushion pads on the base stand and the top finish of some fumiture. To prevent his, use felt pads on any surface of the TV that comes in direct contact with fumiture. à This panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.skrhk | | Storage and Maintenance If you attched some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV. Do not spray water or a cleaning agent directly onto the product. Any liquid that goss into the product may cause a failure, fire, or electric shock. Clean the product with a soft cloth dapped in a small amount of water. Engin D

Other Information E Licence SfS © TheaterSound, SRS and the ® symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence from SRS Labs, Inc. TheaterSound ŒIDOLBY saruiacturec under icence trom Dolby Laboratories. Dolby and the double-D symbol are DIGITAL PLUS | trademarks of Dolby Laboratories: PULSE Manufactured under licence under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are 20+Digital out registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. DIVX DIX Certified® to play DivX® video up to HD 1080p, including premium content. HD | DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license. ABOUT DIVX VIDEO: DhX® is a digital video format created by DivX, Inc, This is an offcial DivX Certified® device that plays DivX video. Visit www. divx.com for more information and software tools to convert your fies into DiuX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certfied@® device must be registered in order to play purchased DiyX Video-on-Demand (VOD) movies. To oblain your registration code, locate the DivX VOD section in your device setup menu. Ga to vod.ciux.com for mare information on how to complete your registration Govered by ane or more of the following US. patents : 7,295,673; 7,460,668, 7,515,710; 7,519,274 In the case of usi Open source licence notice ing open source software, Open Source licence are available on the product menu. Open Source Licence Notice is written only English. [| WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) {applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and is electronic accessories (e.g. charger, headset, USB cable) shouïd not be disposed of with other household waste at the end of their working life. To prevent possible barm to the environment or human health from uncontroled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact efther the retaler where they purchased this product, or their local government ofice, for details of where and how they can take these items for environmental safe recycing. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product {applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Were marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/6. 1 batteries are not proper disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separale batteries from other types of waste and recycle them through your local, free battery return system. Engisn 52

Cable Holder Change PIN Channel List Channel Manager Channel Menu Cleaning Related Clock Colour Tone Component Connecting to a PC: Connecting to an Antenna Connecting to an Audio Device Connecting to an AV Device

Edit Name Energy Saving EPG (Electronic Programme Guide) Equalizer External Speaker

HDMI Headphones Home Theatre Installation Space Installation Related Instaling the Device Driver

GEORGIA 8-800-555-555 =